Evaluating mechanical properties of bitumen and hot mix asphalt modified with nano ferric oxide
Source abstract
Abstract
Abstract In the study, the effect of nano ferric oxide (Fe2O3) modification was investigated to improve the rheological properties of bitumen and mechanical properties of Hot Mix Asphalt (HMA). Rutting potential and non-recoverable compliance (Jnr) were determined after subjecting modified bitumen to short-term and long-term aging. Multiple Stress Creep Recovery (MSCR) test was conducted to evaluate Jnr of bitumen and performance grade. Low temperature stiffness and flexural properties of modified bitumen were also determined. Indirect Tensile Strength (ITS) and Tensile Strength Ratio (TSR) of HMA modified with nano Fe2O3 was determined. Rutting was also determined by Hamburg Wheel Tracking Device (HWTD) for HMA modified with nano Fe2O3. Solar reflection was measured on HMA modified with nano Fe2O3. Results showed that, the nano Fe2O3 improved the rutting potential and non-recoverable compliance. Maximum rutting performance was observed by 5% Fe2O3 modified bitumen. The non-recoverable compliance and the rutting resistance have related. Modified HMA samples have higher strength value than reference sample. Nano Fe2O3 modification of HMA was provided resistance against moisture damage. 1% Fe2O3 modified HMA has the highest rutting resistance with the maximum 6 mm rut depth. Heat islands were increased by nano Fe2O3 modification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · High voltage insulation and dielectric phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. Using the surface free energy method to evaluate the effects of nanomaterial on the fatigue life of hot mix asphalt10.1061/(ASCE)MT.1943-5533.0001614 ↗
2. Performance evaluation of high-elasticity asphalt mixture containing inorganic nano-titanium dioxide for applications in high altitude regions10.1016/j.conbuildmat.2018.12.053 ↗
3. Surface functionalization of silica nanoparticles to enhance aging resistance of asphalt binder10.1016/j.conbuildmat.2019.03.257 ↗
4. Differential effects of ultraviolet radiation and oxidative aging on bio- modified binders10.1016/j.fuel.2019.04.029 ↗
5. Performance evaluation of Al2O3 nanoparticle-modified asphalt binder10.1080/14680629.2016.1208621 ↗
6. Engineering characteristics of nanosilica/polymer-modified bitumen and predicting their rheological properties using multilayer perceptron neural network model10.1016/j.conbuildmat.2019.01.203 ↗
7. Experimental study on the effect of basalt and glass fibers on behavior of open-graded friction course asphalt modified with nano-silica10.1016/j.conbuildmat.2019.04.010 ↗
8. Study on self-healing microcapsule containing rejuvenator for asphalt10.1016/j.conbuildmat.2016.12.165 ↗
9. Effect of capsule addition and healing temperature on the self-healing potential of asphalt mixtures10.1617/s11527-018-1172-5 ↗
10. Mechanical behavior of bitumen and hot-mix asphalt modified with zinc oxide nanoparticle10.1061/(ASCE)MT.1943-5533.0002621 ↗
11. Performance analysis of nano modified bitumen and hot mix asphalt10.1016/j.conbuildmat.2018.04.014 ↗
12. Examination of hot mix asphalt and binder performance modified with nano silica10.1016/j.conbuildmat.2017.09.069 ↗
13. Iron oxide nanoparticles for magnetically-triggered healing of bituminous materials10.1016/j.conbuildmat.2016.02.159 ↗
14. Evaluating mechanical properties of stone mastic asphalt modified with Nano Fe2O310.1016/j.conbuildmat.2016.12.202 ↗
15. Evaluating the effect of asphalt binder modification using nanomaterials on the moisture damage of hot mix asphalt10.1080/14680629.2016.1220865 ↗
16. Investigating the effect of nanoparticles on the rutting behavior of hot-mix asphalt10.1080/10298436.2014.993194 ↗
17. Enhancement of rheological and mechanical properties of bitumen by polythiophene doped with nano Fe3O410.1007/s11837-018-3215-3 ↗
18. Investigating the effect of amorphous carbon powder on the moisture sensitivity, fatigue performance and rutting resistance of rubberized asphalt concrete mixtures10.1016/j.conbuildmat.2019.05.039 ↗
19. Rheological and micro-structural characterization of bitumen modified with carbon nanomaterials10.1016/j.conbuildmat.2018.12.173 ↗
20. Experimental investigation of fracture properties of asphalt mixtures modified with nano Fe2O3 and carbon nanotubes
21. A.K. Arshad, E. Shaffie, K.A. Masri, W. Hashim, Z.A. Rahman, Performance of dense graded asphaltic concrete using nanosilica modified bitumen, in: 10th Malaysian Road Conference & Exhibition, 2019, IOP Conf. Series: Materials Science and Engineering 512, 012061 doi: 10.1088/1757-899X/512/1/012061.10.1088/1757-899X/512/1/012061 ↗
22. Effect of nanosilica morphology on modification of asphalt binder
23. High temperature performance evaluation of bio-oil modified asphalt binders using the DSR and MSCR tests10.1016/j.conbuildmat.2014.11.063 ↗
24. FHWA. The multiple stress creep recovery (MSCR) procedure. Final report to Federal Highway Administration. Report no. FHWA-HIF-11-038; 2011.
25. Use of the multiple stress creep recovery (MSCR) test method to characterize polymer-modified asphalt binders10.1520/JTE20140061 ↗
26. AASHTO Designation: M 332-14, Standard Specification for Performance-Graded Asphalt Binder Using Multiple Stress Creep Recovery (MSCR) Test. Washington, D.C. 20001.