journal article·2020-02

Influences of railway ballast sand contamination on loading pattern of pre-stressed concrete sleeper

Ali Reza Tolou Kian, Javad Sadeghi, Jabbar-Ali Zakeri

Publisher page

Abstract

Abstract Effects of sand contamination of railways on the loading pattern of pre-stressed concrete sleepers were investigated, using a FE model of railway track developed and validated in this research. To derive properties of contaminated ballasts, various laboratory tests were conducted. For the investigation, parametric analyses of the model were conducted in which the tests results were taken into the model as the input data. A threshold for ballast sand-contamination level, beyond which sleeper responses were considerably influenced with the contamination, was obtained. New mathematical expressions were derived for the sleeper loading pattern by considering the effects of ballast sand contamination.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Railway Engineering and Dynamics · Geotechnical Engineering and Underground Structures · Railway Systems and Energy Efficiency

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (87)

Show source-provided references
1. Meacham HC and Prause RH (1978) The development of analytical models for railroad track dynamics
2. Andersson · 2013
3. AREMA (2006) American Railway Engineering and Maintenance of Way Association. Manual for Railway Engineering, Volume 1, Chapter 30, Part 1, “Ties – General Considerations”.
4. AS1085.14 ( 2003) Standards Australia: Railway track material. Part 14: Pre-stressed concrete sleepers. Australian Standard : AS1085.14 - 2003, Sydney, Australia.
5. Field studies on sleeper deflection and ballast pressure in heavy haul track10.1080/13287982.2018.1444335 ↗
6. Assessing the effects of track input on the response of insulated rail joints using field experiments10.1177/0954409712458496 ↗
7. A multi-body dynamic model for analysis of localized track responses in vicinity of rail discontinuities10.1142/S0219455415500583 ↗
8. ASTM D4643 · 2017
9. ASTM C136 · 2014
10. ASTM D3080/D3080M · 2011
11. ASTM D75/D75M · 2009
12. Bach · 2013
13. Verification of box test model and calibration of finite element model: evaluation of railroad ballast performance10.3141/2261-20 ↗
14. Boler · 2012
15. Bowles · 1996
16. Windblown sand along railway infrastructures: a review of challenges and mitigation measures10.1016/j.jweia.2018.04.021 ↗
17. Chen · 1994
18. Optimising low acoustic impedance back-fill material wave barrier dimensions to shield structures from ground borne high speed rail vibrations10.1016/j.conbuildmat.2013.03.034 ↗
19. Benchmarking railway vibrations–track, vehicle, ground and building effects10.1016/j.conbuildmat.2014.07.042 ↗
20. Evaluation of shear strength parameters of rail track ballast in Sri Lanka10.4038/jnsfsr.v44i1.7982 ↗
21. Comparison of coal dust fouled railroad ballast behavior—Granite vs. limestone
22. Doyle · 1980 · 5
23. Use of generalized mass in the interpretation of dynamic response of bending–torsion coupled beams10.1006/jsvi.2000.3160 ↗
24. Substructure nonlinear effects on sleeper design pressure in heavy haul railway tracks10.1061/(ASCE)TE.1943-5436.0000264 ↗
25. Esveld · 2001
26. Freitas da Cunha · 2013
27. Gustavson · 2000
28. Hibbitt, Karlsson, I. Sorensen. ABAQUS User's Manual (version 6.8-1). Pawtucket, (2008).
29. Laboratory characterization of fouled railroad ballast behavior10.3141/2117-12 ↗
30. Numerical and experimental study on contact force fluctuation between wheel and rail considering rail flexibility and track conditions
31. Behavior of geogrid-reinforced ballast under various levels of fouling10.1016/j.geotexmem.2011.01.015 ↗
32. Progressive failure of prestressed concrete sleepers under multiple high-intensity impact loads10.1016/j.engstruct.2009.06.002 ↗
33. Investigation of free vibrations of voided concrete sleepers in railway track system10.1243/09544097JRRT141 ↗
34. Kerr · 2003 · 66
35. Influence of fines content on the undrained cyclic shear strength of sand–clay mixtures10.1016/j.soildyn.2016.01.015 ↗
36. Evaluation of dynamic load on railtrack sleepers based on vehicle-track modeling and analysis10.1142/S0219455402000592 ↗
37. Dynamic studies of railtrack sleepers in a track structure system10.1016/S0022-460X(02)01581-X ↗
38. Li · 2012
39. Linkoping University. Numerical Simulation of Train/Track Dynamics: Computer Models and Verifications, Track Settlement, Hanging Sleepers, and Track Stiffness Variations. Report SUPERTRACK: G1RD-CT-2002-00777, Sweden, (2005).
40. Large scale direct shear tests of soil/PET–yarn geogrid interfaces10.1016/j.geotexmem.2008.03.002 ↗
41. Load impact on railway track due to unsupported sleepers10.1243/095440905X8790 ↗
42. Finite dynamic model for infinite media10.1061/JMCEA3.0001144 ↗
43. H.C. Meacham, R.H. Prause. Studies for Rail Vehicle Track Structures. Report No. FRA-RT-71-45 prepared by Battelle Memorial Institute for the DOT, (1970).
44. Stress-strain states differences in specimens during triaxial compression and direct shear tests10.1016/j.proeng.2017.02.094 ↗
45. Railway critical velocity–Analytical prediction and analysis10.1016/j.trgeo.2015.09.002 ↗
46. Resilient and permanent characteristics of reinforced granular materials by repeated load triaxial tests10.1520/GTJ11324J ↗
47. Experimental and numerical investigation of arching effect in sand using modified Mohr Coulomb10.12989/gae.2015.8.6.829 ↗
48. ORE (1987) Office of Research and Experiments. The dynamic effects due to increasing axle loads from 20 to 22.5 ton. Report D161–RP4., International Union of Railways, Utrecht, the Netherlands, (1987).
49. C. Paderno. Simulation of ballast behaviour under traffic and tamping process, (2009).
50. Paderno · 2010
51. Strength and numerical analysis in the design of permeable reactive barriers
52. Finite element analysis of the direct shear box test10.1680/geot.1987.37.1.11 ↗
53. Rahman · 2013
54. Experimental evaluation of accuracy of current practices in analysis and design of railway track sleepers10.1139/L08-026 ↗
55. Experimental investigation on loading pattern of railway concrete slabs10.1016/j.conbuildmat.2017.07.025 ↗
56. Effect of unsupported sleepers on rail track dynamic behaviour
57. Improvement of mechanical properties of railway track concrete sleepers using steel fibers10.1061/(ASCE)MT.1943-5533.0001646 ↗
58. Development of improved railway track degradation models10.1080/15732470801902436 ↗
59. Evaluation of conventional methods in Analysis and Design of Railway Track System
60. Selig · 1994
61. M.A. Shahin. Design of ballasted railway track foundations under cyclic loading, Geotechnical Special Publication, GeoHunan International Conference: Challenges and Recent Advances in Pavement Technologies and Transportation Geotechnics, 2009.10.1061/41049(356)11 ↗
62. Ground vibration generated by a load moving along a railway track10.1006/jsvi.1999.2406 ↗
63. Influence of unsupported sleepers on the dynamic response of a heavy haul railway embankment10.1177/0954409713495016 ↗
64. Ballast direct shear testing
65. A.N. Talbot. Stresses in Railroad Track. The Second Progress Report of the ASCE-AREA Special Committee on Stresses in Railroad Track, Reprinted, 1980. Published by the American Railway Engineering Association, (1919).
66. T. Tanaka, T. Abe. Elasto-plastic finite element analysis of direct shear test. Transactions of the Japanese Society of Irrigation, Drainage and Reclamation Engineering (Japan), (2002).
67. Tennakoon · 2012
68. Behaviour of clay-fouled ballast under cyclic loading
69. Terzaghi · 1996
70. Timoshenko · 1951
71. Experimental investigation of effects of sand contamination on strain modulus of railway ballast
72. Large-scale direct shear tests on sand-contaminated ballast10.1680/jgeen.17.00107 ↗
73. Laboratory characterization of coal dust fouled ballast behavior
74. UIC (2004) International Union of Railways: Technical specification for the supply track support: rail, wooden, steel and concrete sleepers
75. broad-gauge track and crossings design of mono-block concrete sleepers. UIC leaflet No.s 719, 861, 863, 864 and 865, 2004. Paris, France: International Union of Railways, (2004).
76. Soil–geosynthetic interface shear strength by simple and direct shear tests
77. Effect of loading rate and support conditions on the mode of failure of prestressed concrete railroad ties subjected to impact loading10.1016/0008-8846(94)90113-9 ↗
78. Field investigation of variation of loading pattern of concrete sleeper due to ballast sandy contamination in sandy desert areas10.1007/s12206-012-0886-5 ↗
79. Sensitivity analysis of track parameters on train-track dynamic interaction10.1007/s12206-008-0316-x ↗
80. Field investigation on load distribution and deflections of railway track sleepers10.1007/BF03177452 ↗
81. Modelling and experiment of railway ballast vibrations10.1016/S0022-460X(03)00186-X ↗
82. Dynamics of railway wagons subjected to braking torques on defective tracks10.1080/00423114.2011.571265 ↗
83. Effect of unsupported sleepers on wheel/rail normal load10.1016/j.soildyn.2007.08.006 ↗
84. Sleeper embedded insulated rail joints for minimising the number of modes of failure10.1016/j.engfailanal.2017.02.001 ↗
85. 2004
86. Sadeghi · 1997
87. DIN 18134 · 2012