journal article·2020-02

Atmospheric corrosion protection method for corroded steel members using sacrificial anode of Al-based alloy

Muye Yang, Shigenobu Kainuma, Shuji Ishihara, Akira Kaneko, Takao Yamauchi

Publisher page

Abstract

Abstract This paper proposes a new cathodic protection (CP) system, for steel members vulnerable to corrosion damage in the atmospheric environment. To ensure that this system is suitable for the atmospheric environment, an absorbent fiber sheet is considered as the electrolyte carrier. The independent performance of each component and the combined effectiveness of the CP system are studied by conducting a water absorption test and electrochemical tests using various concentrated NaCl solutions. In addition, the effects of the activator elements (Zn and In) on the galvanic coupling characteristics are investigated through an indoor test. The system durability is verified in an aggressive atmospheric environment, where CP continues for 15 months effectively without any manual intervention. In practice, the CP system’s effectiveness is reflected in the continuous anti-corrosion current as well as the change in the reducing environment at the steel surface, but a change in the local environment at the steel interface is more likely to restore passivity. Finally, by modeling the corrosion reactions and variations in a rust film under wet-dry cycles, we suggest that the steel members of a roughly cleaned surface can be protected by the CP system even in the presence of residual rust.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Paik · 2014
2. Automated inspection and restoration of steel bridges—a critical review of methods and enabling technologies10.1016/S0926-5805(01)00079-6 ↗
3. Corrosion wastage in aged structures
4. An overview of marine corrosion protection with a focus on cathodic protection and coatings
5. Influence of size and proximity of paint coating defects on corrosion behavior of carbon steel plates10.4028/www.scientific.net/KEM.665.125 ↗
6. Y. Tsuchihashi, S. Kainuma, Y.S. Jeong, S. Ishihara, D. Uchida, A. Kaneko, Corrosion Protection Effect with Sacrificial Anode for Corroded Steel Members using Al-Zn Casting Alloy and Fiber Sheet, in: Incheon, Korea, 2015.
7. Quantitative analysis of indium and iron at the surface of a commercial Al–Zn–In sacrificial anode10.1002/1096-9918(200008)30:1<170::AID-SIA733>3.0.CO;2-W ↗
8. D.H. Deacon, D.C. Iles, A.J. Taylor, Durability of steel bridges: a survey of the performance of protective coating, The Steel Construction Institute, Ascot, 1998.
9. Corrosion protection of steel members using an Al-Zn base sacrificial anode and a fiber sheet in an atmospheric environment10.1016/j.conbuildmat.2019.07.067 ↗
10. Fundamental study on corrosion protection method with sacrificial anode of steel members using porous sintered plate and fiber sheet in atmospheric environment10.3323/jcorr.60.535 ↗
11. Influences of mixing and porosity ratios of porous sintered Al-Zn plate and material property of fiber sheet on anticorrosive effects of sacrificial anode for carbon steel in atmospheric environment10.3323/jcorr.62.278 ↗
12. Fundamental study on corrosion protection effect with sacrificial anode for corroded steel members using porous sintered plate and fiber sheet in an atmospheric environment10.3323/jcorr.63.609 ↗
13. Fundamental study on anti-corrosive method with sacrificial anode for steel members using Al-Zn alloy casting plate and fiber sheet in atmospheric environment10.3323/jcorr.65.390 ↗
14. Cathodic protection with sacrificial anodes10.1515/CORRREV.2006.24.3-4.231 ↗
15. Adverse effect of temperature on the operating-potential behavior of Al–Zn–In Anodes
16. Corrosion of an Al–Zn–In alloy in chloride media10.1016/S0010-938X(02)00042-2 ↗
17. Influence of alloying elements and microstructure on aluminium sacrificial anode performance: case of Al–Zn10.1023/A:1003684219989 ↗
18. JIS L 1907: Testing methods for water absorbency of textiles, 2010.
19. Passive cathodic protection system applied for steel structure in a chloride environment
20. ISO 8501-1: Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings, 2007.
21. Faraday’s electrochemical laws and the determination of equivalent weights10.1021/ed031p226 ↗
22. Study on atmospheric corrosion protection method with Al-Zn sacrificial anode and fiber sheet for steel members
23. Investigation of steel corrosion in cracked concrete: Evaluation of macrocell and microcell rates using Tafel polarization response10.1016/j.corsci.2010.04.030 ↗
24. Preparation of aluminum ultrafine particles by anodizing aluminum foil in acidic electrolyte containing chloride ions10.1016/j.electacta.2008.05.006 ↗
25. V.R. Evans, The corrosion and oxidation of metals (Second supplementary volume), 1976.
26. Progress and future directions in studies on corrosion and environmental degradation of steels10.2355/tetsutohagane.100.1089 ↗
27. The role of rusts in corrosion and corrosion protection of iron and steel10.1016/j.corsci.2008.03.008 ↗
28. Long-term atmospheric corrosion of mild steel10.1016/j.corsci.2010.10.007 ↗
29. Conversion electron mössbauer spectrometric study of corrosion products of iron immersed in sodium chloride solution10.5006/1.3583914 ↗
30. The mechanism of atmospheric rusting and the protective amorphous rust on low alloy steel10.1016/S0010-938X(74)80037-5 ↗
31. Operating performance of aluminum anodes. Results from laboratory and field tests
32. Effect of hostile marine environments on the Al-Zn-In-Si sacrificial anode
33. Mechanism of activation of aluminum by low-melting point elements: Part 2 — effect of zinc on activation of aluminum in pitting corrosion10.5006/1.3283964 ↗
34. de de Micheli, Sea water testing of Al-Zn, Al-Zn-Sn, and Al-Zn-In sacrificial anodes10.5006/1.3580802 ↗
35. Studies on Al-Zn-In alloy anode for cathodic protection10.3323/jcorr1954.11.11_486 ↗
36. J. Ma J. Wen Corrosion analysis of Al–Zn–In–Mg–Ti–Mn sacrificial anode alloy J. Alloys Compd. 496 2010 110 11510.1016/j.jallcom.2010.02.174 ↗