journal article·2020-04

Precise finite element modelling of the bond-slip contact behavior between CFRP composites and concrete

Mohammad A. Alhassan, Rajai Z. Al-Rousan, Hiba M. Taha

Publisher page

Abstract

Abstract Repair or strengthening of concrete structures using carbon fiber reinforced polymer (CFRP) composites dependents on the bond strength between the CFRP sheets and concrete. In this study, the bond-slip behavior and strain distributions between CFRP strips and concrete interface were evaluated. Fifteen concrete blocks externally bonded with CFRP strips were simulated using nonlinear finite element analysis. The main variables were the CFRP strip width, length, and concrete strength (25, 35, and 45 MPa). The CFRP strips were bonded in three lengths (Lf): 120, 200, and 280 mm, and for each Lf, three widths (Wf) were used: 60, 100, and 140 mm. Normal stress, lateral strain, and axial strain distributions were graphed across the CFRP strip as a surface graph. Irregular distributions were observed in the lateral strain and normal stress contours; obvious variation across the width of the CFRP strips was noticed. The axial strain showed regular distribution in the x and z directions. Both the pull-out force and slip increase with increase in Lf, Wf, and concrete strength. However, the influence of Lf was more pronounced than Wf for both ultimate load and slip. Finally, a precise representation of the lateral strain across the CFRP strip contact area was developed. Based on independent block model tested experimentally, the pull-out load-slip behaviors clearly indicate that the proposed model provides more precise and accurate representation than typical modeling without treatment of the end contact regions between the CFRP composites and concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete Corrosion and Durability

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. Bond slip behavior of anchored CFRP strips on concrete surfaces10.1016/j.conbuildmat.2016.07.060 ↗
2. Empirical and NLFEA prediction of bond-slip behavior between DSSF concrete and anchored CFRP composites10.1016/j.conbuildmat.2018.03.013 ↗
3. Experimental behavior of reinforced concrete column models strengthened by CFRP materials10.3846/13923730.2006.9636382 ↗
4. Bond-slip behavior between fiber reinforced concrete and CFRP composites10.1016/j.asej.2019.03.001 ↗
5. Modifying CFRP–concrete bond characteristics from pull-out testing10.1680/macr.14.00271 ↗
6. Behavior of plain concrete beams with DSSF strengthened in flexure with anchored CFRP sheets—effects of DSSF content on the bonding length of CFRP sheets
7. Seismic behavior of RC coupled shear walls repaired with CFRP laminates having variable fibers spacing10.1016/j.conbuildmat.2006.05.011 ↗
8. Bond between FRP composites and concrete: assessment of design procedures and analytical models10.1016/j.compositesb.2013.12.075 ↗
9. Flexural strengthening of concrete beams using CFRP, GFRP and hybrid FRP sheets10.1016/j.conbuildmat.2012.07.052 ↗
10. Behaviour of reinforced concrete beams strengthened by CFRP wraps with and without end anchorages10.1016/j.proeng.2014.07.011 ↗
11. Fatigue performance of reinforced concrete beams strengthened with CFRP sheets10.1016/j.conbuildmat.2011.03.045 ↗
12. FRP-strengthened RC beams. I: review of debonding strength models10.1016/S0141-0296(01)00105-5 ↗
13. Strengthening concrete beams for shear with CFRP sheets10.1016/S0950-0618(02)00088-0 ↗
14. Advances on the behavior characterization of FRP-anchored carbon fiber-reinforced polymer (CFRP) sheets used to strengthen concrete elements10.1007/s40069-013-0028-1 ↗
15. Retrofitting of reinforced concrete beams using composite laminates10.1016/j.conbuildmat.2010.06.082 ↗
16. Numerical modelling of the bond between concrete and CFRP laminates at elevated temperatures10.1016/j.engstruct.2015.11.036 ↗
17. Numerical and experimental analysis of two-way slabs strengthened with CFRP strips10.1016/j.engstruct.2005.01.007 ↗
18. Modeling of anchored CFRP strips bonded to concrete10.1016/j.conbuildmat.2015.03.096 ↗
19. Anchorage strength models for FRP and steel plates bonded to concrete10.1061/(ASCE)0733-9445(2001)127:7(784) ↗
20. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
21. Shear-bending interaction in debonding failures of FRP-plated RC beams10.1260/136943303322419214 ↗
22. Experimental observation on bond-slip behavior between concrete and CFRP plate10.4334/IJCSM.2007.1.1.037 ↗
23. Effective bond length of FRP sheets externally bonded to concrete10.4334/IJCSM.2009.3.2.127 ↗
24. J. Pan, C.K.Y. Leung. “Effect of Concrete Composition on FRP/Concrete Bond Capacity” Measuring, Monitoring and Modeling Concrete Properties, pp. 743–748.10.1007/978-1-4020-5104-3_90 ↗
25. Bond-slip behavior between carbon fiber reinforced polymer sheets and heat-damaged concrete10.1016/j.compositesb.2012.09.010 ↗
26. Effective bond length of FRP-to-concrete adhesively-bonded joints: experimental evaluation of existing models10.1016/j.ijadhadh.2013.09.022 ↗
27. Effect of adhesive thickness and concrete strength on FRP-concrete bonds10.1061/(ASCE)CC.1943-5614.0000303 ↗
28. An experimental investigation into the bond-slip behaviour between CFRP composite and lightweight concrete10.1016/j.conbuildmat.2016.03.032 ↗
29. Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond10.1016/j.conbuildmat.2016.03.195 ↗
30. ANSYS: ANSYS User's Manual Revision 12.1, ANSYS, Inc. Canonsburg, Pennsylvania.
31. ACI Committee 318. Building code requirements for structural concrete: (ACI 318-99); and commentary (ACI 318R-99), 1999.