journal article·2020-04

Thermo-mechanical behavior of stainless steel fiber reinforced refractory concrete: Experimental and numerical analysis

Walter Gabriel Bareiro, Flávio de Andrade Silva, Elisa Dominguez Sotelino

Publisher page

Abstract

Abstract Stainless steel fibers are widely used as reinforcement in the refractories due to advantages such as high thermal compatibility, cost-effective on account of long life and effective resistance to corrosion at high temperatures. The purpose of this research is to investigate the thermomechanical behavior of alumina based refractory concrete reinforced with different shapes of stainless steel fibers. Straight, wavy and knurled shaped stainless-steel fibers were selected for the study. These refractory composites are extensively procured for the industrial applications. A research program of experimental test and numerical simulations was carried out. Three-point bending, fiber pull-out, direct tensile and compression tests were performed at temperatures ranging from 25 to 1200 °C to obtain the mechanical residual values. The experimental test results allowed the development of the material’s constitutive model that was implemented in the finite element program ABAQUS. The constitutive model was validated through thermomechanical simulations of the round panel test. The flexural results showed the behavior of the reinforcement with knurled fibers was superior for all temperatures due to its higher bond with the matrix. The experimental tests and the numerical simulations showed that the reinforcement benefits the pre-peak and post-peak behavior of the refractory concretes. The influence of the fibers on the shape of the softening curve allows the prediction of the fracture behavior of the composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Fire effects on concrete materials · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. High temperature durability of fiber reinforced high alumina cement composites10.1016/j.conbuildmat.2018.01.076 ↗
2. Effect of the fibre geometry on the flexural properties of reinforced steel fibre refractory concrete10.1016/j.proeng.2015.06.135 ↗
3. T. Cutard, N. Donval, F. Nazaret, N. Schmitt, Fibre Reinforced Ref Ractory Concrete As a Tooling Material for Organic Matrix Composite Processing Routes, 15th Eur. Conf. Con Compos. Mater. (2012) pp. 24–28.
4. Fiber reinforced refractory castables for SPF toolings
5. The influence of alumina content on the chemical and mechanical behavior of refractory concretes fired at different temperatures10.1016/j.conbuildmat.2018.08.065 ↗
6. The effect of elevated temperatures on the mechanical properties of concrete with fine recycled refractory brick aggregate and aluminate cement10.1016/j.conbuildmat.2017.04.138 ↗
7. High temperature material properties of calcium aluminate cement concrete10.1016/j.conbuildmat.2015.07.023 ↗
8. Markeset · 2006
9. Markeset · 2008
10. A.S. Corporation, Stainless steel Comparator, (2007).
11. Laboratory and field experience on the use of stainless steel to improve durability of reinforced concrete10.1515/CORRREV.2002.20.1-2.129 ↗
12. T. Cutard, N. Donval, F. Nazaret, N. Schmitt, Fibre Reinforced Ref Ractory Concrete As a Tooling Material for Organic Matrix Composite Pro Cessing Routes, (2012) pp. 24–28.
13. F. Nazaret, T. Cutard, Thermomechanical Behaviour of a Fibre-Reinforced Refractory Concrete: Tests and Fe Analysis, 6th RILEM Symp. Fibre-Reinforced Concr. - BEFIB. (2004) pp. 689–698.
14. Ceramic fibre reinforced refractory castables for very high temperature superplastic forming10.1002/mawe.201200032 ↗
15. New advances in the laboratory characterization of refractories : testing and modelling
16. High temperature mechanical characterisation of an alumina refractory concrete for Blast Furnace main trough. Part I. General context10.1016/j.jeurceramsoc.2008.04.031 ↗
17. Experimental study of the thermo-mechanical behaviour of alumina-silicate refractory materials based on a mixture of Algerian kaolinitic clays10.1016/j.ceramint.2011.05.095 ↗
18. Investigation of the thermomechanical properties of industrial refractories: the French programme PROMETHEREF10.1007/s10853-008-2534-0 ↗
19. Correlation among sintering process, porosity, and creep deformation of refractory concrete10.1007/s10853-009-3376-0 ↗
20. Microstructural changes and evolutions of elastic properties versus temperature of alumina and alumina-magnesia refractory castables10.1016/j.jeurceramsoc.2008.02.012 ↗
21. In situ elastic modulus evaluation of Al2O3-MgO refractory castables10.1016/j.ceramint.2013.07.066 ↗
22. Experimental and numerical investigation of the asymmetric primary creep of a fibre reinforced refractory concrete at 1200 °C10.1016/j.jeurceramsoc.2016.03.007 ↗
23. Rilem TC 162-TDF: Test and design methods for steel fibre reinforced concrete – Bending test10.1617/13884 ↗
24. D.S. Kathait, M. Engineering, Ladle Furnace Refractory Lining: A review 2016 IJLERA – All Right Reserved, (2016) 5–12
25. Refractory concretes uniaxial compression behaviour under high temperature testing conditions10.1016/j.jeurceramsoc.2011.07.017 ↗
26. Thermal and thermomechanical evaluations of channel induction furnace applying strong insulation containing lightweight aggregates10.1080/03019233.2017.1291153 ↗
27. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
28. A plastic-damage model for cyclic loading of concrete structures10.1061/(ASCE)0733-9399(1998)124:8(892) ↗
29. Abaqus User’s Manual, Abaqus User’s Manual, Version 6.12. (2012) 1174.
30. Plasticity in reinforced concrete10.1016/0045-7825(82)90016-0 ↗
31. BS EN 14651, Test method for metallic fibred concrete — Measuring the flexural tensile strength (limit of proportionality (LOP), residual), Br. Stand. Inst. 3 (2005) 1–17. doi:9780580610523.
32. FIB, Model Code 2010, 2011. doi:10.1002/9783433604090.ch6.10.1002/9783433604090.ch6 ↗
33. Thermomechanical behaviour of Al2O3-MgO-C refractories under non-oxidizing atmosphere10.1016/j.ceramint.2014.10.146 ↗
34. High-temperature mechanical characterisation of an alumina refractory concrete for Blast Furnace main trough PART II
35. Thermomechanical characterization of monolithic refractory castables10.4028/www.scientific.net/AST.70.37 ↗
36. Evolution of elastic properties and microstructural changes versus temperature in bonding phases of alumina and alumina-magnesia refractory castables10.1016/j.jeurceramsoc.2007.01.016 ↗
37. Elastic properties of high alumina cement castables from room temperature to 1600°C10.1016/S0955-2219(98)00255-6 ↗
38. M.B. B. Mobasher, A. Bonakdar, Fracture Mechanics Applications in Concrete, 2015.
39. Dilatant transverse pull-out response of hooked-end steel fiber from concrete : novel test method
40. A study on validity of using average fiber aspect ratio for mechanical properties of aligned short fiber composites with different fiber aspect ratios10.1007/s00419-007-0138-9 ↗
41. RILEM Technical Committee 89-FMT. Determination of fracture parameters (KI and CTODc) of plain concrete using three-point bend tests10.1007/BF02472029 ↗
42. Flexural behaviour of steel fibre-reinforced concrete under cyclic loading10.1016/j.conbuildmat.2016.09.035 ↗
43. Influence of the mechanical behaviour specificities of damaged refractory castables on the Young’s modulus determination10.1016/j.jeurceramsoc.2005.03.231 ↗
44. Fiber reinforced concrete characterization through round panel test - part I: experimental study
45. Fiber reinforced concrete characterization through round panel test – Part II: analytical and numerical study
46. A new round panel test for the characterization of fiber reinforced concrete: a broad experimental study
47. Defining parameters for concrete damage plasticity model
48. The role of crack rate dependence in the long-term behaviour of cementitious materials10.1016/S0020-7683(00)00338-3 ↗