journal article·2020-04

Corrosion behavior of coupled active and passive reinforcing steels in simulated concrete pore solution

Zheng Dong, Amir Poursaee

Publisher page

Abstract

Abstract The present study aimed to investigate the corrosion behavior of coupled active and passive steels in concrete simulated environment. Three different active-to-passive area (A/P) ratios (i.e. A/P = 1/1, 1/3, 1/20) were studied by changing the exposed area of the active steel while keeping the passive steel constant. For each group of A/P ratio, three cells were prepared: individual cell with active steel specimens, individual cell with passive steel specimens, and a coupled cell which connected active and passive steels. All specimens were immersed in a simulated concrete pore solution for 14 days. Afterwards, 3 wt% NaCl was added to the cells. Different electrochemical measurement techniques were used to assess the influence of galvanic coupling and A/P ratio on the corrosion behavior of the steel specimens. Results indicated that coupling changed the corrosion behavior of the active steel. In the case of A/P = 1/1, the corrosion was mostly observed in the form of localized corrosion, whereas in the case of A/P = 1/20, a more general and severe corrosion was observed. In addition, coupling increased the anodic and cathodic Tafel slopes which are closely related to the iron oxidation rate (i.e. corrosion rate).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Corrosion and Durability · Corrosion Behavior and Inhibition · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Modelling of reinforcement corrosion – corrosion with extensive cathodes10.1002/maco.200604032 ↗
2. Macrocell and microcell corrosion of steel in ordinary Portland cement and high performance concretes10.1016/j.cemconres.2006.07.005 ↗
3. Modeling the kinetics of corrosion in concrete patch repairs and identification of governing parameters10.1016/j.cemconcomp.2010.02.001 ↗
4. Theoretical and experimental study of microcell and macrocell corrosion in patch repairs of concrete structures10.1016/j.cemconcomp.2006.05.010 ↗
5. Contribution of Sacrificial Anode in reinforced concrete patch repair: results of numerical simulations10.1016/j.conbuildmat.2018.05.063 ↗
6. Proposed criterion to assess the electrochemical behavior of carbon steel reinforcements under corrosion in carbonated concrete structures after patch repairs10.1016/j.conbuildmat.2012.09.097 ↗
7. Patch repairs on reinforced concrete structures – model investigations on the required size and practical consequences10.1016/j.cemconcomp.2006.05.016 ↗
8. Corrosion of stirrups under different relative humidity conditions in concrete exposed to chloride environment
9. X.-L. Gu, Z. Dong, Z.-H. Jin, Macrocell corrosion between crossed steel rebars embedded in concrete under chloride environments, in: Proc. 5th Int. Conf. Concr. Repair, Rehabil. Retrofit., 2018. https://doi.org/10.1051/matecconf/201819904005.10.1051/matecconf/201819904005 ↗
10. Corrosion characteristics of a 4-year naturally corroded reinforced concrete beam with load-induced transverse cracks10.1016/j.corsci.2017.01.002 ↗
11. Steel corrosion induced by chloride or carbonation in mortar with bending cracks or joints10.3151/jact.8.135 ↗
12. Influences of bending crack and water-cement ratio on chloride-induced corrosion of main reinforcing bars and stirrups
13. Corrosion of coupled steels with different microstructures in concrete environment10.1016/j.conbuildmat.2018.02.083 ↗
14. 3D simulation of localized steel corrosion in chloride contaminated reinforced concrete10.1016/j.conbuildmat.2014.09.030 ↗
15. Chloride induced reinforcement corrosion: rate limiting step of early pitting corrosion10.1016/j.electacta.2011.04.124 ↗
16. Galvanic currents and corrosion rates of reinforcements measured in cells simulating different pitting areas caused by chloride attack in sodium hydroxide10.1016/j.corsci.2008.07.013 ↗
17. Influence of steel-concrete interface condition on galvanic corrosion currents in carbonated concrete10.1016/j.corsci.2010.04.037 ↗
18. Macrocell corrosion in carbonated Portland and Portland-fly ash concrete – contribution and mechanism10.1016/j.cemconres.2018.12.005 ↗
19. Microcell versus galvanic corrosion currents in carbonated concrete10.1680/macr.13.00214 ↗
20. Significance of macrocell corrosion of reinforcing steel in partially carbonated concrete: numerical and experimental investigation10.1617/s11527-013-0178-2 ↗
21. Macrocell corrosion of steel in concrete – implications for corrosion monitoring10.1016/S0958-9465(01)00027-0 ↗
22. Experimental and numerical study of macro-cell corrosion between crossed steel bars
23. Numerical modelling of macrocells occurring during corrosion of steel in concrete10.1002/maco.200804164 ↗
24. Modelling of reinforcement corrosion – geometrical effects on macrocell corrosion10.1002/maco.200905437 ↗
25. Investigation of steel corrosion in cracked concrete: evaluation of macrocell and microcell rates using Tafel polarization response10.1016/j.corsci.2010.04.030 ↗
26. Macro-cell corrosion in reinforcement of concrete under non-homogeneous chloride environment10.3151/jact.7.31 ↗
27. Steady-state polarization response of chloride-induced macrocell corrosion systems in steel reinforced concrete – numerical and experimental investigations10.1016/j.cemconres.2015.09.021 ↗
28. Laboratory studies on influence of transverse cracking on chloride-induced corrosion rate in concrete10.1016/j.cemconcomp.2015.12.006 ↗
29. Modelling of interaction between corrosion-induced concrete cover crack and steel corrosion rate10.1016/j.corsci.2012.11.028 ↗
30. Influence of mortar resistivity on the rate-limiting step of chloride-induced macro-cell corrosion of reinforcing steel10.1016/j.corsci.2016.04.011 ↗
31. Chloride induced reinforcement corrosion in cracked and coated concrete: from experimental studies to time-dependent numerical modeling10.1002/maco.201810148 ↗
32. Numerical analysis of localized steel corrosion in concrete10.1016/j.conbuildmat.2007.02.007 ↗
33. 3D Numerical modelling of steel corrosion in concrete structures10.1016/j.corsci.2011.08.026 ↗
34. Corrosion current distribution of macrocell and microcell of steel bar in concrete exposed to chloride environments10.1016/j.conbuildmat.2013.05.003 ↗
35. Simulation of steel corrosion in concrete based on the model of macro-cell corrosion circuit10.3151/jact.5.343 ↗
36. D.A. Jones, Principles and prevention of corrosion, Prentice-Hall, Upper Saddle River, New Jersey, 1996. doi: 10.1016/0261-3069(93)90066-5.10.1016/0261-3069(93)90066-5 ↗
37. Area relationships in galvanic corrosion10.5006/0010-9312-27.10.436 ↗
38. Establishment of coupled analysis of interaction between structural deterioration and reinforcement corrosion by salt damage10.3151/jact.14.559 ↗
39. Influence of cathode-to-anode area ratio and separation distance on galvanic corrosion currents of steel in concrete containing chlorides10.1016/0008-8846(95)00094-S ↗
40. Non-uniform corrosion of steel in mortar induced by impressed current method: an experimental and numerical investigation10.1016/j.conbuildmat.2018.06.183 ↗
41. The effect of macrocells between active and passive areas of steel reinforcements10.1016/0010-938X(92)90148-V ↗
42. Reinforcing steel passivation in mortar and pore solution10.1016/j.cemconres.2007.04.005 ↗
43. Determining the appropriate scan rate to perform cyclic polarization test on the steel bars in concrete10.1016/j.electacta.2009.10.004 ↗
44. Significance of coplanar macrocells to corrosion in concrete-embedded steel10.5006/1.3283994 ↗
45. Corrosion assessment of coupled steel reinforcement with Ni-Ti-based shape memory alloy in simulated-concrete pore solution10.1061/(ASCE)MT.1943-5533.0001565 ↗
46. Corrosion of Ti–6Al–4V orthopaedic alloy under stress10.1016/j.mtla.2019.100271 ↗
47. F. Mansfeld, U. Bertocci, Electrochemical corrosion testing, in: Symp. Prog. Electrochem. Corros. Test., ASTM special technical publication 727, San Francisco, 1979.
48. Interpretation of cyclic potentiodynamic polarization test results for study of corrosion behavior of metals: a review10.1134/S207020511805026X ↗
49. The evaluation of coating performance by the variations of phase angles in middle and high frequency domains of EIS10.1016/j.corsci.2008.08.049 ↗
50. The beneficial galvanic effect of the constituent phases in 2205 duplex stainless steel on the passive films formed in a 3.5% NaCl solution10.1016/j.corsci.2018.02.033 ↗