journal article·2020-03

Effects of warm mix additives on the thermal stress and ductile resistance of asphalt binders

Jiaqiu Xu, Enhui Yang, Haoyuan Luo, Haibo Ding

Publisher page

Abstract

Abstract The application of warm mix additives to asphalt was studied to analyze their influence on the low-temperature fracture performance of asphalt materials. To this end, a set of warm mix asphalt binders (WMABs) were prepared by mixing a hot mix asphalt binder (HMAB), PG 64-28 with two different types of warm mix additives (one being Sasobit and the other ET-3100). A bending beam rheometer test and a double edge notched tension test were performed to characterize the thermal stress and ductile resistance of the HMAB and WMABs, respectively. Fourier transform infrared spectroscopy (FTIR) was employed to study the modification mechanism during the application of the warm mix additives. The test results showed that the addition of Sasobit deteriorates the low-temperature fracture properties of the asphalt, with higher thermal stress, linearly increasing critical cracking temperature, and lower crack tip opening displacement. ET-3100 showed little effect on the low-temperature fracture properties of the bitumen, regardless of the added amount. The FTIR results showed that there was basically no chemical reaction in the modification process and both types of warm mix additives were physically modified.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. Flame retardant and its influence on the performance of asphalt – a review10.1016/j.conbuildmat.2019.03.118 ↗
2. Performance of warm mix asphalt containing Sasobit®: state-of-the-art10.1016/j.conbuildmat.2012.08.015 ↗
3. Fundamental performance investigation on reactive liquid asphalt10.1016/j.jclepro.2019.03.289 ↗
4. Effect of copper slag on performance of warm mix asphalt10.1080/10298436.2017.1339884 ↗
5. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures10.1016/j.fuel.2011.09.017 ↗
6. Evaluation of mechanical performance and modification mechanism of asphalt modified with graphene oxide and warm mix additives10.1016/j.jclepro.2018.05.040 ↗
7. Use of a warm mix asphalt additive to reduce the production temperatures and to improve the performance of asphalt rubber mixtures10.1016/j.jclepro.2012.09.047 ↗
8. Warm mix asphalt: an overview10.1016/j.jclepro.2011.11.053 ↗
9. Assessing potential for warm-mix asphalt technology adoption10.3141/2040-10 ↗
10. Pavement engineering materials: review on the use of warm-mix asphalt10.1016/j.conbuildmat.2012.06.038 ↗
11. Field performance of top-down fatigue cracking for warm mix asphalt pavements10.1080/10298436.2016.1248204 ↗
12. Mechanical performance of asphalt mortar containing hydrated lime and EAFSS at low and high temperatures10.3390/ma10070743 ↗
13. Comparison of thermal stresses calculated from asphalt binder and asphalt mixture creep tests10.1061/(ASCE)MT.1943-5533.0000651 ↗
14. Comparisons of analytical and approximate interconversion methods for thermal stress computation10.1139/cjce-2014-0558 ↗
15. Comparison of thermal stress calculation: Hopkins and Hamming’s Algorithm and Laplace transformation approach10.1061/(ASCE)MT.1943-5533.0001567 ↗
16. Development of SHRP binder specification (with discussion)
17. Investigation on the cooling medium effect in the characterization of asphalt binder with the bending beam rheometer (BBR)10.1139/cjce-2017-0586 ↗
18. Direct measurement of asphalt binder thermal cracking10.1061/(ASCE)0899-1561(2005)17:6(632) ↗
19. Single-event cracking temperature of asphalt pavements directly from bending beam rheometer data10.1061/(ASCE)0733-947X(2002)128:5(465) ↗
20. Low temperature cracking characterization of asphalt binders by means of the single-edge notch bending (SENB) test
21. Essential and plastic works of ductile fracture in asphalt binders10.3141/1875-01 ↗
22. Characterization of warm mix asphalt binders containing artificially long-term aged binders10.1016/j.conbuildmat.2008.11.005 ↗
23. Effects of warm-mix asphalt additives on workability and mechanical properties of reclaimed asphalt pavement material10.3141/2126-18 ↗
24. Evaluation of low-temperature binder properties of warm-mix asphalt, extracted and recovered RAP and RAS, and bioasphalt10.1061/(ASCE)MT.1943-5533.0000295 ↗
25. Estimating moisture sensitivity of warm mix asphalt modified with zycosoil as an antistrip agent using surface free energy method10.1061/(ASCE)MT.1943-5533.0000455 ↗
26. Rheological and mechanical properties of bitumen modified with Sasobit, polyethylene, paraffin, and their mixture10.1061/(ASCE)MT.1943-5533.0002664 ↗
28. The fracture of bitumens and asphalt mixes by temperature induced stresses
29. Ferry · 1980
30. On Creep and Relaxation10.1063/1.1722885 ↗
31. The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids10.1021/ja01619a008 ↗
32. Application of the essential work of fracture (EWF) concept for polymers, related blends and composites: a review10.1016/j.progpolymsci.2010.07.001 ↗
33. The essential work of fracture (EWF) method – analyzing the post-yielding fracture mechanics of polymers10.1016/j.engfailanal.2009.04.027 ↗
34. The essential fracture work concept for toughness measurement of ductile polymers10.1002/pen.10626 ↗
35. Low-temperature fracture in reactive-ethylene-terpolymer-modified asphalt binders10.1080/1029843021000067809 ↗
36. How temperature and loading rate affect the yield behavior in polymer-modified asphalt systems10.1080/1029843031000097580 ↗
37. Research on CTOD for low-cycle fatigue analysis of central-through cracked plates considering accumulative plastic strain10.1016/j.engfracmech.2015.11.021 ↗
38. Interrelation between energy partitioned work of fracture parameters and the crack tip opening displacement in amorphous polyester films10.1023/A:1006797522901 ↗
39. Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure10.1016/j.conbuildmat.2018.04.056 ↗
40. Fourier transform infrared spectroscopy characterization of aging-related properties of original and nano-modified asphalt binders10.1016/j.conbuildmat.2015.10.085 ↗
41. Correlation of DSR results and FTIR’s carbonyl and sulfoxide indexes: effect of aging temperature on asphalt rheology10.1061/(ASCE)MT.1943-5533.0002781 ↗
42. Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy10.1016/j.conbuildmat.2012.08.004 ↗
43. Rheological effects of commercial waxes and polyphosphoric acid in bitumen 160/220—low temperature performance10.1016/j.fuel.2005.09.014 ↗
44. Effect of bitumen wax on asphalt mixture performance10.1016/j.conbuildmat.2006.05.048 ↗