journal article·2020-04

Effect of activated carbon obtained from vinasse and marc on the rheological and mechanical characteristics of the bitumen binders and hot mix asphalts

Elif Şeyma Seyrek, Erkut Yalçin, Mehmet Yilmaz, Baha Vural Kök, Hasan Arslanoğlu

Publisher page

Abstract

Abstract This study examined the effect of the activated carbon, obtained from marc and vinasse agricultural wastes and used in the bitumen modification, on the rheological characteristics of bitumen binders and mechanical properties of hot mix asphalt. For this purpose, the activated carbon, obtained from vinasse generated at distillation step in the alcohol production from molasses together with grape marc, was used. The activated carbon was added to neat bitumen (PG 58–16) in 3 different ratios (5%, 10%, and 15% by weight of neat binder). The following tests were applied to the neat and modified bitumen: BBR (bending beam rheometer), DSR (dynamic shear rheometer), rotational viscosity, softening point, and penetration. The HMA samples were prepared using the neat and modified binders. The following tests were applied to the HMA samples: Marshall stability and flow, resistance against the damage induced by moisture, indirect tensile stiffness modulus, cyclic creep, and indirect tensile fatigue. Considering the binder test results, it was determined that using the activated carbon in the bituminous modification increased the stiffness and high-temperature performance of the bituminous binders, while the low-temperature performance was not affected much. Based on the mixture tests, it was found that using the activated carbon modified bitumen increased the Marshall stability, stiffness, resistance against the fatigue cracking, and permanent deformation of mixes. On the other hand, the use of activated carbon in bitumen modification adversely affected the resistance against the moisture-induced damage.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Ullidtz · 1987
2. Das · 2015
3. Turkish Petroleum Corporation · 2013
4. K. Gopalakrishnan, W.J. Steyn, J. Harvey, Climate Change, Energy, Sustainability and Pavements, Springer-Verlag Berlin Heidelberg Press, Germany, 2014.10.1007/978-3-662-44719-2 ↗
5. Çeloğlu · 2016
6. Morphology, rheology, and physical properties of polymer-modified asphalt binders10.1016/j.eurpolymj.2018.10.049 ↗
7. Use of asphalt roofing shingle waste in HMA10.1016/j.conbuildmat.2004.08.005 ↗
8. Laboratory evaluation of flexible pavement materials containing waste polyethylene (WPE) film10.1016/j.conbuildmat.2010.11.068 ↗
9. Performance evaluation of crumb rubber and paraffin modified stone mastic asphalt10.1139/cjce-2015-0365 ↗
10. The effect of retreated coal wastes as filler on the performance of asphalt mastics and mixtures10.1016/j.conbuildmat.2019.01.088 ↗
11. Utilizing bio-char as a bio-modifier for asphalt cement: a sustainable application of bio-fuel by-product10.1016/j.fuel.2014.05.002 ↗
12. Rheological performance of bio-char modified asphalt with different particle sizes10.3390/app8091665 ↗
13. Evaluation of bio-asphalt binders modified with biochar: a pyrolysis by-product of Mesua ferrea seed cover waste10.1080/23311916.2018.1548534 ↗
14. Effect of furfural-derived thermoset furan resin on the high-temperature performance of bitumen10.1080/14680629.2014.990048 ↗
15. Using activated carbon to reduce the volatile organic compounds from bituminous materials10.1061/(ASCE)MT.1943-5533.0002024 ↗
16. Effects of carbon black on the anti aging, rheological and conductive properties of SBS/asphalt/carbon black composites10.1016/j.conbuildmat.2013.11.061 ↗
17. Characterization of bitumen modified with pyrolytic carbon black from scrap tires10.3390/su11061631 ↗
18. Use of softwood bark charcoal as a modifier for road bitumen10.1016/S0016-2361(99)00196-9 ↗
19. Induced heating-healing characterization of activated carbon modified asphalt concrete under microwave radiation10.1016/j.conbuildmat.2018.05.012 ↗
20. Investigation on mechanical and microwave heating characteristics of asphalt mastic using activated carbon powder as electro-magnetic absorbing materials10.1016/j.conbuildmat.2019.01.050 ↗
21. Engineering properties and microwave heating induced ice-melting performance of asphalt mixture with activated carbon powder filler10.1016/j.conbuildmat.2018.11.094 ↗
22. Effect of activated carbon and furan resin on asphalt mixture performance10.1080/14680629.2015.1092465 ↗
23. Utilization of vinasse for production of poly-3-(hydroxybutyrate-co hydroxyvalerate) by Haloferax mediterranei
24. Arslanoğlu · 2016
25. Cr(VI) adsorption on low-cost activated carbon developed from grape marc-vinasse mixture
26. Zaniewski · 2004
27. EN 12697-34. Bituminous mixtures – Test methods for hot mix asphalt – Part 34: Marshall test. European Standard, 2012.
28. Laboratory design and investigation of the properties of continuously graded asphaltic concrete containing recycled plastics aggregate replacement (plastiphalt)10.1016/S0958-9465(00)00026-3 ↗
29. AASHTO T283. Standard method of test for resistance of compacted hot mix asphalt (HMA) to moisture-induced damage, American Association of State Highway and Transportation Officials (AASHTO), Washington, 2014.
30. BS DD 213. Method for determination of the indirect tensile stiffness modulus of bituminous mixtures. Draft for Development, British Standards Institution, London, 1993.
31. BS DD ABF. Method for determination of the fatigue characteristics of bituminous mixtures using indirect tensile fatigue. Draft for Development, British Standards Institution, London, 1997.
32. Ghile · 2006
33. Material specific effects of hydrated lime on the properties and performance behaviour of asphalt mixtures and asphaltic pavements10.1016/j.conbuildmat.2009.10.005 ↗
34. ELE, Universal materials testing apparatus for asphalt and unbound specimens, Reference and Operating Manual, ELE International Ltd., Hertfordshire, UK, 1994.
35. A simple stepwise method to determine and evaluate the initiation of tertiary flow for asphalt mixtures under dynamic creep test10.1016/j.conbuildmat.2009.06.020 ↗