journal article·2020-04

Multifactorial behavior of the elastic modulus and compressive strength in masonry prisms of hollow concrete blocks

José Álvarez-Pérez, Jorge H. Chávez-Gómez, Bernardo T. Terán-Torres, Milena Mesa-Lavista, Ramón Balandrano-Vázquez

Publisher page

Abstract

Abstract In this paper, a new set of non-linear mathematical expressions to calculate the compressive strength and the elastic modulus of masonry prisms with hollow concrete blocks were obtained. The mathematical models were obtained by multifactorial technique model, which has as advantage: the analysis of the variables associated to the models that provide the main influence on the interaction among the different factors analyzed. It also allows obtaining a nonlinear regression model optimized for each response variable (f’m and Em). Detailed micro-modeling techniques are adopted to simulate the hollow concrete block masonry, describing the experimental tests for the component materials (blocks and mortar) and block-mortar interface. In addition, the structural behavior of the masonry prisms was obtained experimentally. The numerical models were calibrated and validated based on the experimental tests. A sensitivity analysis was carried out by applying a multifactorial complete design 3 5 and an optimization analysis of the regression models; the compressive strength and the elastic modulus in masonry prisms were evaluated. The results showed that the compressive and tensile strength of the hollow concrete block and the mortar thickness are the most influential parameters for the maximum compressive strength. The compressive strength of the block and the tensile strength of mortar were the most relevant parameters for the elastic modulus in the masonry prisms. In addition, is concluded that, from the analysis and optimization process, both expressions (f’m and Em) are necessarily multifactorial.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Masonry and Concrete Structural Analysis · Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. INEGI, National Institute of Statistics and Geography. https://www.inegi.org.mx/default.html
2. On the compressive strength prediction for concrete masonry prisms10.1617/s11527-009-9492-0 ↗
3. A semi-random field finite element method to predict the maximum eccentric compressive load for masonry prisms10.1016/j.conbuildmat.2014.12.027 ↗
4. Spatial variability and sensitivity analysis on the compressive strength of holow concrete block masonry wallettes
5. Spatial variability and stochastic strength prediction of unreinforced masonry walls in vertical bending10.1016/j.engstruct.2013.11.031 ↗
6. J.F. Lizárra, Confine mansory walls behavior on flexible elements School of Engineering (IINGEN), National Autonomus University of Mexico (UNAM), (In spanish), 2017.
7. Characterization of the uniaxial compression behaviour of unreinforced masonry-Sensitivity analysis based on a numerical and experimental approach10.1016/j.acme.2014.06.007 ↗
8. Numerical prediction of the behavior, strength and elasticity of masonry in compression10.1016/j.engstruct.2015.02.011 ↗
9. ACI-530, Building Code Requirements and Specification for Masonry Structures and Companion Commentaries, TMS 602-13/4CI 530.1-13/ASCE 6-13, 2013, pp. S-1–S-85.
10. Eurocode-6, Design of masonry structures - Part 1-1: general rules for reinforced and unreinforced masonry structures, 2005, pp. 1–125.
11. MSJC. ACI 530-02/ASCE 5-02/TMS 402-02, Masonry Standards Joint Committee, Building code requirements for masonry structures, American Concrete Institute, Structural Engineering Institute of the American Society of Civil Engineers, The Masonry Society, Detroit, 2002.
12. NMX-C-464-ONNCCE-2010, Determination of diagonal compression strength and wall shear modulus, as well as determination of compressive strength and elastic modulus of piles (in Spanish), 2010, p. 24.
13. ASTM-C-1314, Standard test method for compressive strength of masonry prisms, 2016, p. 10.
14. NTCM, Complementary technical standards for design and construction of masonry structures (in Spanish), 2017, p. 88.
15. An experimental investigation of mechanical properties in clay brick masonry by partial replacement of fine aggregate with clay brick waste
16. Uniaxial compressive strength and stiffness of field-extracted and laboratory-constructed masonry prisms10.1061/(ASCE)MT.1943-5533.0000731 ↗
17. Stress-strain characteristics of clay brick masonry under uniaxial compression10.1061/(ASCE)0899-1561(2007)19:9(728) ↗
18. Strength and elasticity of brick masonry prisms and wallettes under compression10.1617/s11527-006-9141-9 ↗
19. Compressive properties of structural clay tile prisms10.1061/(ASCE)0733-9445(1997)123:7(920) ↗
20. Mechanics of hollow concrete block masonry prisms under compression: review and prospects10.1016/j.cemconcomp.2006.11.003 ↗
21. An experimental evaluation of prediction models for the mechanical behavior of unreinforced, lime-mortar masonry under compression10.1016/j.jobe.2015.10.001 ↗
22. ONNCCE, Nacional Organization for Standards and Certification of Construction and Building 2016-2019. https://onncce.org.mx/es/.
23. NMX-C-036-ONNCCE-2013, Compressive strength blocks, partitions or bricks and partitions and paving stones (in Spanish), 2013, p. 10.
24. ASTM-C-140, Standard test methods for sampling and testing concrete masonry units and related units, 2018, p. 17.
25. ASTM-C-90, Standard specification for loadbearing concrete masonry units, 2016, p. 5.
26. ASTM-C-129, Standard specification for nonloadbearing concrete masonry units, 2017, p. 3.
27. NMX-C-414-ONNCCE-2017, Hydraulic cementants / specifications and tests methods (in Spanish), 2017, p. 17.
28. NMX-C-111-ONNCCE-2018, Aggregates for hydraulic concrete “- Specifications and Test Methods” (in Spanish), 2018, p. 15.
29. NMX-C-061-ONNCCE-2015, Determination of the compressive strength of hydraulic cement (in Spanish), 2015, p. 12.
30. ASTM-C-109, Standard test method for compressive strength of hydraulic cement mortars, 2016, p. 15.
31. ASTM-C-307, Standard test method for tensile strength of chemical-resistant mortar, grouts and monolithic surfacing, 2012, p. 9.
32. Abaqus, Analysis useŕs manual, in: U. Documentation. Dassault Systemes Simulia Corporation 2015 USA (Ed.) 2016.
33. Compression behavior of concrete10.1061/(ASCE)0733-9445(1986)112:3(605) ↗
34. Numerical calibration problem of road engineering10.4067/S0718-915X2011000300006 ↗
35. Probabilistic three-dimensional finite element study on composite beams with steel trapezoidal decking10.1016/j.jcsr.2012.10.003 ↗
36. Simplified micro modeling of partially grouted masonry assemblages10.1016/j.conbuildmat.2015.03.021 ↗
37. E. Mohsin, Support Stiffness Effect on Tall Load Bearing Masonry Walls, The University of Alberta, 2005.
38. Behaviour of masonry wallettes made from a new concrete formulation under compression loads at ambient temperatures: testing and modeling10.1016/j.conbuildmat.2014.04.043 ↗
39. A plastic-damage model for concrete10.1016/0020-7683(89)90050-4 ↗
40. Plastic-damage model for cyclic loading of concrete structures
41. C.T. Sun, Z.-H. Jim, Fracture Mechanics, Copyright © 2012 Elsevier Inc. All rights reserved 2012.
42. T. Telford, CEB-FIP, Model Code, First published in 2010 by the International Federation for Structural Concrete, 2010, pp. 28–41.
43. Oller · 2001
44. Defining parameters for concrete damage plasticity model
45. P.H. Feenstra, Computational Aspects of Biaxial Stress in Plain and Reinforced Concrete, Civil Engineering and Geosciences, University of Techonology Delft The Netherlands, 1993. uuid:faf2fd16-1c43-4711-b783-9e8e00d10c21.
46. D.C. Montgomery, G.C. Runger, Applied Statistics and Probability for Engineers, third ed., Printed in the United States of America, 2003.
47. Multivariate design of experiments for engineering dimensional analysis
48. A. Law, W. Kelton, Simulation Modeling and Analysis, (2015).
49. Statgraphics · 2014
50. Experimental design and data analysis in computer simulation studies in the behavioral sciences
51. The design, analysis and evaluation of simulation experiments
52. On the Kolmogorov-Smirnov test for normality with mean and variance unknown10.1080/01621459.1967.10482916 ↗