Fracture response of fiber-reinforced sodium carbonate activated slag mortars
Source abstract
Abstract
Abstract Sodium carbonate-activated slag (NCAS) is getting attention with its environmental benefits among the other alkali-activated materials. However, long setting time and the brittleness of these materials are still an issue that needs to be tailored. In this study, the matrix phase of NCAS was strengthened with the aid of two modifiers: calcium hydroxide (CH) and sodium hydroxide (NH), and significant improvement in both setting time and mechanical properties was achieved. Moreover, polypropylene and steel fibers were used in order to enhance the fracture properties of NCAS mortars. The results showed that fracture properties are improved with the modifiers and the contribution of CH was much more pronounced. Fiber reinforcement improved the fracture properties, the contribution of steel fibers was significant. After the flexural test, crack patterns were evaluated and also the adhesion between the matrix and fiber was examined in a scanning electron microscope. It was found that the type of fiber and fiber-matrix bonding mechanism are more effective in the improvement of the fracture properties rather than the matrix features.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Microbial Applications in Construction Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (53)
Show source-provided references
1. Fracture properties of geopolymer paste and concrete
2. On the tortuosity of the fracture surface in concrete10.1016/S0008-8846(97)00063-X ↗
3. Cornelis Metselaar, M.Z. Jumaat, Mechanisms of interfacial bond in steel and polypropylene fiber reinforced geopolymer composites10.1016/j.compscitech.2015.11.009 ↗
4. Novel fiber-reinforced composite materials based on sustainable geopolymer matrix10.1016/j.proeng.2011.11.2120 ↗
5. Impact properties of geopolymer based extrudates incorporated with fly ash and PVA short fiber10.1016/j.conbuildmat.2006.08.006 ↗
6. Comparative deflection hardening behavior of short fiber reinforced geopolymer composites10.1016/j.conbuildmat.2014.07.085 ↗
7. Quasi-static and dynamic compressive mechanical properties of engineered cementitious composite incorporating ground granulated blast furnace slag10.1016/j.matdes.2012.08.037 ↗
8. Ductile behavior of polyethylene fibre reinforced geopolymer composite10.1051/matecconf/20179701047 ↗
9. Fracture toughness of geopolymeric concretes reinforced with basalt fibers10.1016/j.cemconcomp.2004.02.044 ↗
10. Characterisation of cotton fibre-reinforced geopolymer composites10.1016/j.compositesb.2013.01.013 ↗
11. Influence of mixing methods of nano silica on the microstructural and mechanical properties of flax fabric reinforced geopolymer composites10.1016/j.conbuildmat.2016.07.049 ↗
12. Evaluation of hybrid steel fiber reinforcement in high performance geopolymer composites10.1617/s11527-017-1030-x ↗
13. Durability characteristics of steel fibre reinforced geopolymer concrete10.1016/j.conbuildmat.2015.06.014 ↗
14. Development of ultra-high-performance geopolymer concrete10.1680/macr.13.00057 ↗
15. The behaviour of steel-fiber-reinforced geopolymer concrete beams in shear10.1680/macr.12.00081 ↗
16. High tensile strength fly ash based geopolymer composite using copper coated micro steel fiber10.1016/j.conbuildmat.2016.02.228 ↗
17. Pull-out behavior of different fibers in geopolymer mortars: Effects of alkaline solution concentration and curing10.1617/s11527-016-0889-2 ↗
18. Mechanical and durable behaviour of alkaline cement mortars reinforced with polypropylene fibres10.1016/S0008-8846(03)00222-9 ↗
19. Flexural behavior of geopolymer composites reinforced with steel and polypropylene macro fibers10.1016/j.cemconcomp.2016.11.014 ↗
20. Fiber-matrix bond characteristics of alkali-activated slag cement-based composites10.1061/(ASCE)MT.1943-5533.0001642 ↗
21. Microstructure and strength development of sodium carbonate activated blast furnace slags10.1061/(ASCE)MT.1943-5533.0002944 ↗
22. Shi · 2006
23. Preliminary study on combined-alkali-slag paste materials10.1016/S0008-8846(00)00269-6 ↗
24. Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements10.1680/adcr.2003.15.3.129 ↗
25. S. Bernal R. San Nicolas J. Provis J.S.J. van Deventer Alkali-activated slag cements produced with a blended sodium carbonate / sodium silicate activator Adv. Cem. Res. 2015 1 12 dx.doi.org/10.1680/adcr.15.0001310.1680/adcr.15.00013 ↗
26. Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate10.1016/j.cemconres.2015.02.014 ↗
27. Investigation of novel waste glass and limestone binders using statistical methods10.1016/j.conbuildmat.2015.02.085 ↗
28. Effect of calcium hydroxide on fresh state behavior of sodium carbonate activated blast furnace slag pastes10.1016/j.conbuildmat.2019.03.328 ↗
29. Mechanical behavior of high strength concrete reinforced with glass fiber10.1016/j.jestch.2019.01.003 ↗
30. High strength characteristics of cement mortar reinforced with hybrid fibres10.1016/j.conbuildmat.2010.11.008 ↗
31. Effect of different fibers on the mechanical properties of concrete containing fly ash10.1016/j.conbuildmat.2006.06.026 ↗
32. Rheology of fiber-reinforced cementitious materials10.1016/j.cemconres.2006.10.015 ↗
33. Effect of vegetable and synthetic fibers on mechanical performance and durability of Metakaolin-based mortars10.1080/01694243.2018.1442647 ↗
34. Effect of shrinkage reducing admixture on flexural behaviors of fiber reinforced cementitious composites10.1016/j.cemconcomp.2011.12.004 ↗
35. A simplified method for determining double-K fracture parameters for three-point bending tests10.1023/A:1007676716549 ↗
36. Mechanical properties and fracture behavior of basalt and glass fiber reinforced concrete: An experimental study10.1016/j.conbuildmat.2015.10.006 ↗
37. Effect of specimen size on fracture energy and softening curve of concrete: Part I. Experiments and fracture energy10.1016/j.cemconres.2008.03.017 ↗
38. Biaxial flexural behavior of ultra-high-performance fiber-reinforced concrete with different fiber lengths and placement methods10.1016/j.cemconcomp.2015.07.011 ↗
39. Synthesis and mechanical properties of cotton fabric reinforced geopolymer composites10.1016/j.compositesb.2013.12.036 ↗
40. Mechanical and flexural performance of synthetic fibre reinforced geopolymer concrete10.1016/j.conbuildmat.2018.07.110 ↗
41. Review of mechanical properties of short fibre reinforced geopolymer composites10.1016/j.conbuildmat.2013.01.026 ↗
42. High performance cementitious composite from alkali-activated ladle slag reinforced with polypropylene fibers10.1016/j.cemconcomp.2018.03.024 ↗
43. Post-crack (or post-peak) flexural response and toughness of fiber reinforced concrete after exposure to high temperature10.1016/j.conbuildmat.2010.04.003 ↗
44. Flexural performance and toughness of hybrid steel and polypropylene fibre reinforced geopolymer10.1016/j.conbuildmat.2017.11.122 ↗
45. The influences of matrix and steel fibre tensile strengths on the fracture energy of high-strength concrete10.1016/j.conbuildmat.2010.11.084 ↗
46. Fracture properties and softening curves of steel fiber-reinforced slag-based geopolymer mortar and concrete10.3390/ma11081445 ↗
47. Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part I: Experimental investigation of crack propagation10.1023/A:1018668929989 ↗
48. Determination of double-K criterion for crack propagation in quasi-brittle fracture, Part II: Analytical evaluating and practical measuring methods for three-point bending notched beams10.1023/A:1018740728458 ↗
49. Matrix design of strain hardening fiber reinforced engineered geopolymer composite10.1016/j.compositesb.2015.11.039 ↗
50. Mechanical properties of ambient cured high strength hybrid steel and synthetic fibers reinforced geopolymer composites10.1016/j.cemconcomp.2017.10.011 ↗
51. Fracture response of alkali-activated slag mortars reinforced by carbon fibres10.1088/1757-899X/379/1/012027 ↗
52. Determining double-K fracture parameters of concrete for compact tension and wedge splitting tests using weight function10.1016/j.engfracmech.2008.12.018 ↗
53. Fibre pullout-microstructural relationships for cementitious mortars10.1007/BF00627023 ↗