Effects of Rediset on the adhesion, stripping, thermal and surface morphologies of PG76 binder
Source abstract
Abstract
Abstract Apart from lowering the production and application temperature, Warm Mix Asphalt (WMA) additive has the potential to enhance the adhesion property of the base binders. Surface free energy (SFE) from contact angles was determined by sessile drop device (SDD) to find out the work of adhesion of WMA additive-modified binders. It is shown that addition of WMA additive at different weight percentage would initiate dissimilar implications on surface properties. Test data are compared with the nanoscale adhesion force of WMA additive-PG76 using atomic force microscopy (AFM). The connection between the contact angle analysis with the topography was also investigated; SFE and AFM results exhibit some agreement in findings. The WMA additive had improved the adhesion characteristics of warm mix additive-modified binders. In addition to that, adhesion and stripping behaviour of the blends were also observed via the Boiling Water test. The test demonstrated that the adhesive characteristics of the blending are at its best and the results inclined to the conclusion that the WMA additive had effect on the adhesion and stripping behaviour. The thermogravimetry analysis (TGA) was carried out to observe the thermal behaviour of the samples. It is found that the thermal decomposition of these blends takes place at temperature between 300 and 500 °C. Together, all the findings are in agreement that the addition of Rediset into PG76 could benefit for the WMA application.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Polymer modification of bitumen: advances and challenges10.1016/j.eurpolymj.2014.02.005 ↗
2. Characteristics of polymers and polymer-modified binders10.1177/0361198196153500106 ↗
3. Performance of polymer modified
4. A review of the fundamentals of polymer-modified asphalts: asphalt/polymer interactions and principles of compatibility10.1016/j.cis.2015.07.010 ↗
5. Effects of alternative polymer modifications on cracking performance of asphalt binders and resultant mixtures10.1016/j.conbuildmat.2016.06.049 ↗
6. Development of heavy-duty mastic asphalt bridge surfacing, incorporating trinidad lake asphalt and polymer modified binders10.1080/14680629.2005.9690016 ↗
7. Characteristics of elastomeric and plastomeric binders in contact with natural asphalts10.1016/j.conbuildmat.2005.12.025 ↗
8. Improving quality and durability of bitumen and asphalt concrete by modification using recycled polyethylene based polymer composition10.1016/j.proeng.2016.06.016 ↗
9. Modifications of bitumen by elastomer and reactive polymer—a comparative study10.1081/LFT-120003577 ↗
10. Sustainability assessment of bitumen with polyethylene as polymer10.9790/1684-1050106 ↗
11. Engineering characteristics of nanosilica / polymer-modified bitumen and predicting their rheological properties using multilayer perceptron neural network model10.1016/j.conbuildmat.2019.01.203 ↗
12. Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives10.1016/j.conbuildmat.2016.02.089 ↗
13. Aging effect on the physical properties of polyurethane modified bitumen
14. Moisture characteristics of mixtures with warm mix asphalt technologies – a review10.1016/j.conbuildmat.2017.03.069 ↗
15. I. Menapace, E. Masad, Microstructural, chemical and thermal analyses of Warm Mix Asphalt, in: Sustain. Eco-Efficiency Conserv. Transp. Infrastruct. Asset Manag., 2014: pp. 157–168.10.1201/b16730-24 ↗
16. Effects of WMA technologies on asphalt binder blending10.1061/(ASCE)MT.1943-5533.0001381 ↗
17. Laboratory evaluation of Rediset modified bitumen based on rheology and adhesion properties10.1016/j.conbuildmat.2017.07.037 ↗
18. A laboratory investigation on the rheological properties of asphalt binder containing rediset
19. Influence of warm mix asphalt technology on asphalt physical and mechanical properties10.1016/j.conbuildmat.2016.02.212 ↗
20. Mechanical performance of asphalt rubber mixtures with warm mix asphalt additives
21. Effects of non-foaming WMA additives on asphalt binders at high performance temperatures10.1016/j.fuel.2011.09.017 ↗
22. High temperature properties of rubberized binders containing warm asphalt additives10.1016/j.conbuildmat.2007.10.010 ↗
23. Using a modified asphalt bond strength test to investigate the properties of asphalt binders with poly ethylene wax-based warm mix asphalt additive
24. Determination of binder-aggregate adhesion by contact angle measurement
25. Application of asphalt-aggregates interfacial energies to evaluate moisture-induced damage of warm mix asphalt10.1016/j.sbspro.2013.11.095 ↗
26. Evaluation of bio-binder modified asphalt ’ s adhesion behavior using sessile drop device and atomic force microscopy10.1016/j.conbuildmat.2017.03.114 ↗
27. M. Wang, L. Liu, Test procedure of utilizing atomic force microscopy to characterize bitumen, in: 2015 Int. Symp. Front. Road Airpt. Eng., 2015: pp. 96–108. doi: 10.1038/3099.10.1061/9780784414255.010 ↗
28. Nano-scale properties of warm-modified bituminous binders determined with atomic force microscopy10.1080/14680629.2017.1304262 ↗
29. Adhesion between modified binders and aggregate minerals at ambient conditions measured with particle-probe scanning force microscopes10.1061/(ASCE)MT.1943-5533.0001887 ↗
30. Thermal characterization of asphalt mixtures by tg / dtg, dta and ftIr10.1007/s10973-007-8807-z ↗
31. Influence of aging on thermal behavior and characterization of SBR compound-modified asphalt10.1007/s10973-013-3338-2 ↗
32. Effects of thermal oxidative ageing on dynamic viscosity, TG / DTG, DTA and FTIR of SBS- and SBS / sulfur-modified asphalts10.1016/j.conbuildmat.2010.06.048 ↗
33. Investigation on physical, thermal and chemical properties of palm kernel oil polyol bio-based binder as a replacement for bituminous binder10.1016/j.conbuildmat.2019.01.144 ↗
34. Composition analysis of crumb rubber during interaction with asphalt and effect on properties of binder10.1080/10298436.2012.721548 ↗
35. Thermal and kinetic analyses of pure and oxidized bitumens10.1016/j.fuel.2007.08.016 ↗
36. Investigating the performance of warm mix additives
37. Mechanical property characterization of warm-mix asphalt prepared with chemical additives10.1061/(ASCE)MT.1943-5533.0000810 ↗
38. AkzoNobel, Rediset ® LQ - 1106 (2014).
39. S. Practice, Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water, (n.d.) 1–2. doi:10.1520/D3625-12.2.
40. ASTM, E 1131 - 08 Standard Test Method for Compositional Analysis by Thermogravimetry, 2012.
41. Attractive forces at interfaces10.1021/ie50660a008 ↗
42. Determination of the surface free energy of asphalt binders by sessile drop method
43. Estimation of the surface free energy of polymers10.1002/app.1969.070130815 ↗
44. Experimental evaluation of anti-stripping additives in bituminous mixtures through multiple scale laboratory test results10.1016/j.conbuildmat.2011.10.012 ↗
45. F. Parker, M. Wilson, Evaluation of boiling and stress pedestal tests for assessing stripping potential of alabama asphalt concrete mixtures, in: 65th Annu. Meet. Transp. Res. Board, 1986: pp. 90–100.
46. Characterization of petroleum bitumens and their fractions by thermogravimetric analysis and differential scanning calorimetry10.1016/S0016-2361(96)00169-X ↗
47. Thermal analysis on the component interaction of asphalt binders modified with crumb rubber and warm mix additives10.1016/j.conbuildmat.2016.08.032 ↗
48. Determining the water damage resistance of nano-clay modified bitumens using the indirect tensile strength and surface free energy methods10.1016/j.conbuildmat.2018.02.011 ↗
49. Surface free energy and moisture susceptibility evaluation of asphalt binders modified with surfactant-based chemical additive10.1016/j.jclepro.2015.10.101 ↗
50. T. Pauli, W. Grimes, J. Beiswenger, A.J.M. Schmets, Surface structuring of wax in complex media surface structuring of wax in complex media, (2014). doi:10.1061/(ASCE)MT.1943-5533.0001032.10.1061/(ASCE)MT.1943-5533.0001032 ↗
51. S. Magonov, J. Alexander, M. Surtchev, A. M.Hung, E.H. Fini, Compositional mapping of bitumen using local electrostatic force interactions in atomic force microscopy, J. Microscopy. (2016) 1–11. doi:10.1111/jmi.12475.10.1111/jmi.12475 ↗
52. Mechanical properties of asphalt binders evaluated by atomic force microscopy10.1111/j.1365-2818.2011.03552.x ↗
53. L. Loeber, O. Sutton, J. Morel, New direct observations of asphalts and asphalt binders by scanning electron microscopy and atomic force microscopy, J. Microsc. 182, Pt 1 (n.d.) 32–39. http://onlinelibrary.wiley.com/doi/10.1046/j.1365-2818.1996.134416.x/full.10.1046/j.1365-2818.1996.134416.x ↗
54. Bitumen morphologies by phase-detection atomic force microscopy10.1111/j.1365-2818.2006.01540.x ↗
55. Microstructure morphologies of asphalt binders using atomic force microscopy10.1007/s11595-016-1523-4 ↗
56. Surface microstructure of bitumen characterized by atomic force microscopy10.1016/j.cis.2015.01.003 ↗
57. Surface wrinkling: the phenomenon causing bees in bitumen10.1007/s10853-013-7505-4 ↗
58. A.T. Pauli, R.W. Grimes, A. Cookman, J. Beiswenger, Characterization of asphalt materials by scanning probe microscopy, Elsevier Ltd., 2015. doi:10.1016/B978-0-08-100269-8.00004-0.10.1016/B978-0-08-100269-8.00004-0 ↗
59. Relationship analysis between surface free energy and chemical composition of asphalt binder10.1016/j.conbuildmat.2014.08.024 ↗
60. Assessment of a sessile drop device and a new testing approach measuring contact angles on aggregates and asphalt binders10.1061/(ASCE)MT.1943-5533.0000852 ↗
61. Evaluation of fatigue cracking in asphalt mixtures based on surface energy10.1061/(ASCE)MT.1943-5533.0001465 ↗
62. Adhesion: molecules and mechanics
63. Assessing moisture sensitivity of rubberized warm mix asphalt mixtures using the surface free energy method and dynamic water pressure tester10.1520/JTE20170241 ↗
64. Application of surface free energy techniques to evaluate bitumen-aggregate bonding strength and bituminous mixture moisture sensitivity
65. Application of sessile drop method to determine surface free energy of asphalt and aggregate
66. Using atomic force microscopy and molecular dynamics simulation to investigate the asphalt micro properties10.1016/j.ijprt.2017.09.017 ↗