journal article·2020-04

Physical, mechanical and thermal properties of lightweight insulating mortar with recycled Etna volcanic aggregates

Loredana Contrafatto, Carmelo Lazzaro Danzuso, Salvatore Gazzo, Leopoldo Greco

Publisher page

Abstract

Abstract The study concerns the reuse of pyroclastic products generated by volcano Etna eruptions for the production of lightweight insulating mortar. Fourteen mixtures, grouped into three families, with three types of natural binder were designed. The first family (CEM) contains Portland cement and calcium hydroxide, the second Natural Hydraulic Lime (NHL), the third (POZZ) combines pozzolanic sand and calcium hydroxide, to form a cementitious compound. The effect of the presence of an Air Entraining Agent (AEA), added in three different ratio with respect to the dry mixture (0.02%, 0.05% 0.1%) to increase the porosity, was investigated. In the mixtures containing the 0.1% of AEA, a breathable resin in the ratio 0.1% of the binder was added, to compensate for the degradation of the mechanical strength due to the AEA. On the basis of the mechanical and physical properties of the composites (flexural and compressive strength, density, porosity, water absorption) and of the thermal conductivity, always within the range of 0.154–0.266 W/mK, the mixtures suitable for lightweight and thermal mortar are identified. The correlation between density and porosity and between thermal conductivity and pososity is discussed. A numerical simulation, based on a numerical homogenization technique at the mesoscale, is used to show how the thermal properties of the constituents of the mixture influence the equivalent thermal conductivity of the composite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovations in Concrete and Construction Materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Recycled Etna volcanic ash for cement, mortar and concrete manufacturing10.1016/j.conbuildmat.2017.06.125 ↗
2. Blended cement using volcanic ash and pumice10.1016/S0008-8846(03)00127-3 ↗
3. Applicability of the standard specifications of ASTM C618 for evaluation of natural pozzolans10.1016/j.cemconcomp.2010.08.007 ↗
4. Effect of volcanic ash pozzolan or limestone replacement on hydration of Portland cement10.1016/j.conbuildmat.2018.11.193 ↗
5. Significance of performance based specifications in the qualification and characterization of blended cement using volcanic ash10.1016/j.conbuildmat.2017.03.180 ↗
6. Influence of fineness of volcanic ash and its blends with quarry dust and slag on compressive strength of mortar under different curing temperatures10.1016/j.conbuildmat.2017.07.214 ↗
7. Microstructure of cement paste with natural pozzolanic volcanic ash and Portland cement at different stages of curing10.1016/j.conbuildmat.2016.03.084 ↗
8. Particle size effect of volcanic ash towards developing engineered Portland cements10.1061/(ASCE)MT.1943-5533.0002348 ↗
9. Use of silica fume and natural volcanic ash as a replacement to Portland cement: micro and pore structural investigation using NMR, XRD, FTIR and X-ray microtomography10.1016/j.conbuildmat.2017.09.165 ↗
10. Corrosion resistance and chloride diffusivity of volcanic ash blended cement mortar10.1016/j.cemconres.2003.10.021 ↗
11. Erosive wear on ceramic materials obtained from solid residuals and volcanic ashes10.1016/j.triboint.2010.04.017 ↗
12. Synthesis and thermal properties of inorganic polymers (geopolymers) for structural and refractory applications from volcanic ash10.1016/j.ceramint.2011.05.002 ↗
13. The effect of adding alumina-oxide to metakaolin and volcanic ash on geopolymer products: a comparative study10.1016/j.conbuildmat.2012.04.023 ↗
14. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature10.1016/j.cemconcomp.2013.03.010 ↗
15. Fabrication and characterization of hardened bodies from japanese volcanic ash using geopolymerization10.1016/j.ceramint.2013.08.061 ↗
16. Mechanical properties and durability of volcanic ash based geopolymer mortars10.1016/j.conbuildmat.2016.07.141 ↗
17. Some engineering properties of stabilized clayey soils incorporating natural pozzolans and industrial wastes10.1016/j.conbuildmat.2011.03.042 ↗
18. Clayey soil stabilization using geopolymer and Portland cement10.1016/j.conbuildmat.2018.07.207 ↗
19. Experimental study on marl soil stabilization using natural pozzolans10.1061/(ASCE)MT.1943-5533.0002577 ↗
20. Strength properties of volcanic slag aggregate lightweight concrete for high performance masonry units10.1016/j.conbuildmat.2006.10.002 ↗
21. The effects of cement/fly ash ratios on the volcanic slag aggregate lightweight concrete masonry units10.1016/j.conbuildmat.2007.05.011 ↗
22. Properties of volcanic pumice based cement and lightweight concrete10.1016/j.cemconres.2003.08.004 ↗
23. The use of a volcanic material as filler in self-compacting concrete production for lower strength applications10.3989/mc.2017.09315 ↗
24. High strength blended cement concrete incorporating volcanic ash: performance at high temperatures10.1016/j.cemconcomp.2006.01.013 ↗
25. Strength, durability and micro-structural aspects of high performance volcanic ash concrete10.1016/j.cemconres.2007.02.014 ↗
26. Durability performance and engineering properties of shale and volcanic ashes concretes10.1016/j.conbuildmat.2015.01.020 ↗
27. Performance of volcanic ash and pumice based blended cement concrete in mixed sulfate environment10.1016/j.cemconres.2006.03.010 ↗
28. Chloride induced corrosion of reinforcement in volcanic ash and pumice based blended concrete10.1016/j.cemconcomp.2004.02.047 ↗
29. Characteristics of pristine volcanic materials: Beneficial and harmful effects and their management for restoration of agroecosystem10.1016/j.scitotenv.2015.10.157 ↗
30. Possible use of volcanic ash as a filler in polyphenylene sulfide composites: thermal, mechanical, and erosive wear properties10.1002/pc.22847 ↗
31. Cumulative pore volume, pore size distribution and phasespercolation in porous inorganic polymer composites: relation microstructure and effective thermal conductivity10.1016/j.enbuild.2014.11.066 ↗
32. Effect of volcanic ash filler on thermal viscoelastic property of sbs modified asphalt mastic10.1016/j.conbuildmat.2018.09.101 ↗
33. Use of recycled aggregates in road sub-base construction and concrete manufacturing10.4401/ag-7785 ↗
34. Recycled construction and demolition waste as a possible source of materials for composite manufacturing10.1016/j.jobe.2019.100742 ↗
35. Traditional, state-of-the-art and renewable thermal building insulation materials: an overview10.1016/j.conbuildmat.2019.04.102 ↗
36. Recycled-pet fibre based panels for building thermal insulation: environmental impact and improvement potential assessment for a greener production10.1016/j.scitotenv.2014.06.022 ↗
37. Cleaner production of the lightweight insulating composites: microstructure, pore network and thermal conductivity10.1016/j.enbuild.2015.08.009 ↗
38. Mechanical and thermal properties of recycling lightweight pervious concrete10.1007/s13369-014-1563-z ↗
39. Investigations on thermal and mechanical properties of cement mortar with reed and straw fibers10.18280/ijht.35Sp0151 ↗
40. A concrete homogenisation technique at meso-scale level accounting for damaging behaviour of cement paste and aggregates10.1016/j.compstruc.2016.05.009 ↗
41. Meso-scale simulation of concrete multiaxial behaviour10.1080/19648189.2016.1182085 ↗
42. A nonlinear lagrangian particle model for grains assemblies including grain relative rotations10.1002/nag.2915 ↗
43. Simulation results for damage with evolving microstructure and growing strain gradient moduli
44. Taylor · 2002
45. Factors affecting the thermal properties of concrete and applicability of its prediction models10.1016/S0360-1323(01)00061-0 ↗