journal article·2020-05

Behavior of rubber-sleeved stud shear connectors under fatigue loading

Xiaoqing Xu, Xuhong Zhou, Yuqing Liu

Publisher page

Abstract

Abstract The fatigue performance of the rubber-sleeved stud shear connector, which is a composite of ordinary stud and rubber sleeve, is not clear yet, which limits its application in steel and concrete composite structures subjected to fatigue loading. In this paper, fatigue push-out tests on nine shear connector specimens were conducted to provide insight into the influence of shear stress range and rubber sleeve height on the fatigue performance of shear connectors. Nominal shear stress-based fatigue strength curves for rubber-sleeved stud shear connectors were established. It was observed that the fatigue strength of shear connectors decreases with the rubber sleeve height. In addition, rubber sleeves with low stiffness lead to a larger relative slip growth rate of rubber-sleeved stud shear connectors. However, the static stiffness degradation laws of the ordinary stud and rubber-sleeved stud shear connectors are similar, and a unified static shear stiffness degradation model was established. Moreover, fatigue failure mechanism of rubber-sleeved stud shear connectors was analyzed. The results illustrated in this paper can provide reference for the fatigue design of rubber-sleeved stud shear connectors and support their application in steel and concrete composite structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. Oehlers · 1999
2. Push-out tests on studs in high strength and normal strength concrete10.1016/0143-974X(94)00036-H ↗
3. Study on mechanical behavior of rubber-sleeved studs for steel and concrete composite structures10.1016/j.conbuildmat.2013.12.011 ↗
4. Analytical and numerical study of the shear stiffness of rubber-sleeved stud10.1016/j.jcsr.2016.04.020 ↗
5. Experimental and numerical study on deformation performance of Rubber-Sleeved Stud connector under cyclic load10.1016/j.conbuildmat.2018.10.099 ↗
6. Study on the composite mechanism of large Rubber-Sleeved Stud connector10.1016/j.conbuildmat.2019.03.303 ↗
7. X. Xu, Y. Liu, M. Yuan, W. Ren, Application of rubber-sleeved studs on steel and concrete composite deck in railway bridges, in: H. Furuta, D.M. Frangopol, M. Akiyama (Eds.), Proceedings of the Fourth International Symposium on Life-cycle Civil Engineering, IALCCE, Tokyo, Japan 2014, pp. 780-783.10.1201/b17618-112 ↗
8. Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading10.1016/j.conbuildmat.2012.07.050 ↗
9. Study on fatigue property of steel–concrete composite beams and studs10.1016/j.jcsr.2013.11.004 ↗
10. Fatigue behavior of welded shear studs in precast composite beams10.1061/(ASCE)BE.1943-5592.0001134 ↗
11. Fatigue tests on steel-concrete composite beams subjected to sagging moments10.1061/(ASCE)ST.1943-541X.0002326 ↗
12. Fatigue strength of shear connectors
13. Hallam · 1976
14. The fatigue strength of stud shear connections in composite beams10.1680/iicep.1985.995 ↗
15. The shear stiffness of stud shear connections in composite beams10.1016/0143-974X(86)90008-8 ↗
16. Deterioration in strength of stud connectors in composite bridge beams10.1061/(ASCE)0733-9445(1990)116:12(3417) ↗
17. Experimental study on stud shear connectors subjected to cyclic loading10.1016/0143-974X(96)00007-7 ↗
18. Resistance of stud shear connectors to fatigue10.1016/S0143-974X(99)00082-6 ↗
19. Design of shear connection in composite steel and concrete bridges with precast decks10.1016/S0143-974X(00)00018-3 ↗
20. Static and fatigue behavior of large stud shear connectors for steel–concrete composite bridges10.1016/j.jcsr.2005.01.007 ↗
21. Valente MI. Experimental studies on shear connection systems in steel and lightweight concrete composite bridges, PhD Dissertation, University of Minho, Portugal; 2007.
22. Resistance of headed studs subjected to fatigue loading: Part I: Experimental study10.1016/j.jcsr.2006.06.035 ↗
23. Resistance of headed studs subjected to fatigue loading Part II: Analytical study10.1016/j.jcsr.2006.06.036 ↗
24. Fatigue of headed studs welded with improved ferrules under rotating shear force10.1016/j.jcsr.2013.09.012 ↗
25. Static and fatigue behavior of short-headed studs embedded in a thin ultrahigh-performance concrete layer10.1061/(ASCE)BE.1943-5592.0001031 ↗
26. Fatigue behavior of the group stud shear connectors in steel-concrete composite bridges10.1061/(ASCE)BE.1943-5592.0001261 ↗
27. Static and fatigue push-out tests of short headed shear studs embedded in Engineered Cementitious Composites (ECC)10.1016/j.engstruct.2018.12.068 ↗
28. EN 1994-1-1. Eurocode 4: Design of composite steel and concrete structures, Part 1-1: General rules and rules for buildings, CEN, Brüssel, 2010.
29. American Association of State Highway and Transportation Officials · 2017
30. Ministry of Housing and Urban-Rural Construction of the People’s Republic of China and General Administration of Quality Supervision, Inspection and Quarantine of the People’s Republic of China, Code for design of steel and concrete composite bridges GB 50917-2013. Beijing, China Planning Press, 2014.
31. Ministry of Transport of the People’s Republic of China, Specifications for design and construction of highway steel-concrete composite bridge JTG/T D64-01-2015. Beijing, China Communications Press, 2015.
32. Hobbacher · 2016
33. Experimental study of shear capacity of stud connector
34. A critical analysis of crack propagation laws10.1115/1.3656900 ↗
35. Murakami · 1992