Numerical investigation of lateral inertia effect in dynamic impact testing of UHPC using a Split-Hopkinson pressure bar
Source abstract
Abstract
Abstract The paper focuses on investigating the lateral inertia effect in dynamic impact testing of ultra-high performance concrete (UHPC) using a Split-Hopkinson pressure bar (SHPB), based on numerical analysis. The assigned material parameters of the UHPC are obtained by calibrating the parameters of the Karagozian and Case concrete (KCC) model in LS-DYNA software. An impact analysis model of UHPC using SHPB technology is established and calibrated by the test results. A parametric study is performed to estimate the influences of the diameter and aspect ratio (AR) of the UHPC specimen, and the strain rate on the lateral inertia effect in the SHPB testing. The numerical simulation results show that: (1) the impact analysis model can predict the test results of UHPC specimens using the SHPB technique with reasonable accuracy; (2) to reduce the lateral inertia effect, the suggested diameter and AR of the UHPC specimen is 0.9–0.95 times the diameter of the bar, and 0.35–0.45 at a 100 s−1 strain rate or lower, respectively; (3) the lateral inertia effect of UHPC in the SHPB testing is more noticeable with an increase in strain rate, and the diameter of the UHPC specimen is recommended to be 0.95 times the diameter of the bar, as the strain rate is higher than 100 s−1.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Innovative concrete reinforcement materials · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. P. Richard, M. Cheytezy, Reactive Powder Concrete with High Ductility and 200MPa-800MPa Compressive Strength, ACI SP, 144 (1997) 507–518.
2. Design and behavior of super-long span cable-stayed bridge with CFRP cables and UHPC members10.1016/j.compositesb.2018.11.060 ↗
3. Effect of SCM and nano-particles on static and dynamic mechanical properties of UHPC10.1016/j.conbuildmat.2018.06.126 ↗
4. Behaviour of different types of concrete under impact and quasi-static loading10.4028/www.scientific.net/AMM.486.295 ↗
5. Mechanical behavior of fiber-reinforced high-strength concrete subjected to high strain-rate compressive loading10.1016/j.conbuildmat.2011.12.083 ↗
6. Behavior of steel fiber-reinforced high-strength concrete at medium strain rate
7. Projectile penetration and perforation of high performance concrete: experimental results and macroscopic modelling10.1016/j.ijimpeng.2004.11.003 ↗
8. Split-Hopkinson pressure- bar tests on concrete and mortar in tension and compression
9. Rate effects in uniaxial dynamic compression of concrete
10. Effects of strain rate on concrete strength
11. Experimental impact analysis on ultra-high performance concrete (UHPC) for achieving stress equilibrium (SE) and constant strain rate (CSR) in Split Hopkinson pressure bar (SHPB) using pulse shaping technique10.1016/j.conbuildmat.2017.03.185 ↗
12. Impact properties of engineered cementitious composites with high volume fly ash using SHPB Test10.1007/s11595-012-0511-6 ↗
13. Uniaxial compression tests at various loading rates for reactive powder concrete10.1016/j.tafmec.2009.06.001 ↗
14. Impact resistance of reactive powder concrete10.1007/s11595-015-1223-5 ↗
15. Dynamic compression behavior of ultra-high performance cement based composites10.1016/j.ijimpeng.2009.11.005 ↗
16. Dynamic mechanical behaviour of ultra-high performance fiber reinforced concretes10.1007/s11595-007-6938-5 ↗
17. Effects of steel fibres on dynamic strength of UHPC10.1016/j.conbuildmat.2016.04.007 ↗
18. Influences of nano-particles on dynamic strength of ultra-high performance concrete10.1016/j.compositesb.2016.01.044 ↗
19. Dynamic properties of reactive powder concrete subjected to repeated impacts
20. L.L. Wang, M.Q. Xu, S.Q. Shi, Application of BP neural network to SHPB technique for the investigation of impact response of polymers, 2003 SEM Annual Conference and Exposition on Experimental and Applied Mechanics, Charlotte, North Carolina, USA, 2003.
21. Numerical Investigation of the effects of pulse shaper, lateral inertia, and friction on the calculated strain-rate sensitivity of UHP-FRC using a split hopkinson pressure bar10.1061/(ASCE)MT.1943-5533.0001580 ↗
22. G.T. Gary, “Classic split-Hopkinson pressure bar testing.” Mechanical Testing and Evaluation, Metals Handbook, American Society for Metals, Materials Park, OH, 8 (2000) 462-476.10.31399/asm.hb.v08.a0003296 ↗
23. Comparative experimental investigations on the compressive impact behavior of fiber-reinforced ultra high-performance concretes10.1016/j.conbuildmat.2018.10.020 ↗
24. Numerical simulation of the Split Hopkinson Pressure Bar test technique for concrete under compression10.1016/j.ijimpeng.2009.06.012 ↗
25. Experimental and numerical investigation on the dynamic tensile behavior of ultra-high performance cement based composites10.1016/j.conbuildmat.2011.12.058 ↗
26. C. Noble, E. Kokko, I. Darnell, T. Dunn, L. Hagler, L. Leininger, Concrete model descriptions and summary of benchmark studies for blast effects simulations, U.S. Department of Energy, Lawrence Livermore National Laboratory, 2005.10.2172/878628 ↗
27. A stress–strain model for uniaxial and confined concrete under compression10.1016/j.engstruct.2012.03.027 ↗
28. Rate dependent behavior and modeling of concrete based on SHPB experiments10.1016/j.cemconcomp.2014.07.011 ↗