journal article·2020-07

Mechanical properties and water absorption of steam-cured mortar containing phase change composites

Liping Bi, Guangcheng Long, Cong Ma, Youjun Xie

Publisher page

Abstract

Abstract Steam curing is a common method used in the production of precast concrete components. However, the formation of microcracks and large pores during steam curing process are very detrimental to the long-term performance of cement-based materials. The use of phase change materials may be a potential method for improving disadvantages caused by steam curing. Phase change composites are prepared by implanting paraffin into diatomite, expanded graphite, and mixture of diatomite and expanded graphite. They are represented by D/P, EG/P and D/EG/P in turn. The thermal properties and static water contact angle of phase change composite (CPCM) are tested. The mechanical and water absorption properties of steam-cured mortars with CPCM are investigated. Results indicate that the latent heat values of EG/P, D/P and D/EG/P are 80%, 30% and 36% of the values for pure paraffin, respectively. The CPCMs exhibit hydrophobic properties due to the roughness of solid surface. The presence of CPCM greatly improve the water resistance of steam-cured mortar without sacrificing mechanical properties, and steam-cured mortar with 1 vol% D/P has the best performance. The possible reason is that D/P reduces the porosity and improves porous microstructure of steam-cured mortar. The cracks and holes in the mortar matrix can be covered and filled with paraffin from D/P by SEM analysis. There is no interfacial gap between D/P and the mortar matrix through SEM analysis, which promotes the formation of a dense and strong mortar matrix. Therefore, the addition of an appropriate CPCM is helpful to improve the durability of the steam-cured cementitious materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase Change Materials Research · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The effect of curing conditions on compressive strength of ultrahigh strength concrete with high volume mineral admixtures10.1016/j.buildenv.2006.03.013 ↗
2. The influence of steam curing on early-age compressive strength of pozzolanic mortars10.1007/s13369-015-1952-y ↗
3. The impact mechanical characteristics of steam-cured concrete under different curing temperature conditions10.1016/j.conbuildmat.2020.118042 ↗
4. Hydration kinetics of cement incorporating different nanoparticles at elevated temperatures10.1016/j.tca.2018.04.017 ↗
5. Efficiency of metakaolin in steam cured high strength concrete10.1016/j.conbuildmat.2017.07.006 ↗
6. Effect of subsequent curing on surface permeability and compressive strength of steam-cured concrete10.1016/j.conbuildmat.2018.08.076 ↗
7. Quantitative analysis of the influence of subfreezing temperature on the mechanical properties of steam-cured concrete10.1016/j.conbuildmat.2019.02.084 ↗
8. Estimation of the risk for early thermal cracking for SCC containing fly ash10.1617/s11527-011-9757-2 ↗
9. Development of microstructures in plain cement pastes hydrated at different temperatures10.1016/0008-8846(91)90044-I ↗
10. Effect of temperature on the microstructure of calcium silicate hydrate (C-S-H)10.1016/j.cemconres.2013.06.008 ↗
11. Effect of the hydration temperature on the microstructure of Class G cement: C-S-H composition and density10.1016/j.cemconres.2017.02.008 ↗
12. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗
13. Delayed ettringite formation10.1016/S0008-8846(01)00466-5 ↗
14. Performance of novel thermal energy storage engineered cementitious composites incorporating a paraffin/diatomite composite phase change material10.1016/j.apenergy.2014.02.007 ↗
15. Preparation, characterization and thermal properties of Lauryl alcohol/Kaolin as novel form-stable composite phase change material for thermal energy storage in buildings10.1016/j.applthermaleng.2013.05.015 ↗
16. Utilization of lauric acid-myristic acid/expanded graphite phase change materials to improve thermal properties of cement mortar10.1016/j.enbuild.2016.10.016 ↗
17. Thermal enhancement of paraffin/hydrophobic expanded perlite granular phase change composite using graphene nanoplatelets10.1016/j.enbuild.2018.03.053 ↗
18. Mechanical properties and microscale changes of geopolymer concrete and Portland cement concrete containing micro-encapsulated phase change materials10.1016/j.cemconres.2017.07.012 ↗
19. Potential applications of phase change materials to mitigate freeze-thaw deteriorations in concrete pavement10.1016/j.conbuildmat.2018.05.113 ↗
20. On the feasibility of using phase change materials (PCMs) to mitigate thermal cracking in cementitious materials10.1016/j.cemconcomp.2014.03.003 ↗
21. Microstructure and mechanical properties of cement mortar containing phase change materials10.3390/app9050943 ↗
22. Influence of adding phase change materials on the physical and mechanical properties of cement mortars10.1016/j.conbuildmat.2016.09.119 ↗
23. Paraffin/diatomite composite phase change material incorporated cement-based composite for thermal energy storage10.1016/j.apenergy.2013.01.005 ↗
24. Study on preparation and thermal property of binary fatty acid and the binary fatty acids/diatomite composite phase change materials10.1016/j.apenergy.2010.11.001 ↗
25. Properties and hydration of blended cements with calcareous diatomite10.1016/j.cemconres.2006.05.005 ↗
26. Thermal conductivity improvement of stearic acid using expanded graphite and carbon fiber for energy storage applications10.1016/j.renene.2006.11.011 ↗
27. Optimal preparation of PCM/diatomite composites for enhancing thermal properties10.1016/j.ijheatmasstransfer.2013.03.043 ↗
28. Thermal characteristics of paraffin/expanded perlite composite for latent heat thermal energy storage10.1080/15567030701752768 ↗
29. ASTM D2320, 1998 (reapproved 2017), Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method). West Conshohocken, Pennsylvania, the United States.
30. High thermal performance composite PCMs loading xGnP for application to building using radiant floor heating system10.1016/j.solmat.2012.02.028 ↗
31. Characterization of multi-scale morphology and superhydrophobicity of water bamboo leaves and biomimetic polydimethylsiloxane (PDMS) replicas10.1016/S1672-6529(14)60152-9 ↗
32. Multiphysics analysis of effects of encapsulated phase change materials (PCMs) in cement mortars10.1016/j.cemconres.2019.02.002 ↗
33. Microhardness characteristics of high-strength cement paste and interfacial transition zone at different curing regimes10.1016/j.conbuildmat.2019.06.084 ↗
34. Effect of expanded graphite on the phase change materials of high-density polyethylene/wax blends10.1016/j.tca.2014.11.023 ↗
35. Characterization of thermal, high-temperature rheological and fatigue properties of asphalt mastic containing fly ash cenosphere10.1016/j.conbuildmat.2019.117345 ↗
36. Microencapsulated phase change materials for enhancing the thermal performance of Portland cement concrete and geopolymer concrete for passive building applications10.1016/j.enconman.2016.11.061 ↗
37. Experimental investigation of thermal and mechanical properties of magnesium oxychloride cement with form-stable phase change material10.1016/j.conbuildmat.2018.07.113 ↗
38. Effects of metakaolin on properties and microstructure of magnesium phosphate cement10.1016/j.conbuildmat.2019.117353 ↗
39. Multiscale modelling for the thermal creep analysis of PCM concrete10.1016/j.enbuild.2016.09.013 ↗
40. Influence of atmospheric steam curing by solar energy on the compressive and flexural strength of concretes10.1016/j.conbuildmat.2013.08.085 ↗
41. ASTM C1585, 2013, Standard Teat Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, West Conshohocken, Pennsylvania, the United States.
42. Clean and low-alkalinity one-part geopolymeric cement: effects of sodium sulfate on microstructure and properties10.1016/j.jclepro.2019.119279 ↗
43. Preparation of cleaner one-part geopolymer by investigating different types of commercial sodium metasilicate in China10.1016/j.jclepro.2018.08.060 ↗