journal article·2023-02

Investigation of waste clay brick as partial replacement in geopolymer binder

Janitha Migunthanna, Pathmanathan Rajeev, Jay Sanjayan

Publisher page

Abstract

This study investigates waste clay brick (WCB) as partial binder replacement in geopolymers with fly ash and/or slag. The properties investigated include setting time, flowability, strength, water absorption, volume of permeable voids (VPV), water absorption rate, effect of long-term immersion in water, and sulfate attack. For all WCB-based geopolymer mortar samples tested, the short- and long-term compressive strengths remained between 42 MPa and 62 MPa. Water absorption and VPV were found to be between 6.4–7.1 % and 11.9–13 %, respectively. Compared to OPC, geopolymers investigated here showed enhanced resistance to sulfate attack considering both post-exposure length expansion and strength deterioration.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycled Aggregate Concrete Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (76)

Show source-provided references
1. Habert, G., S.A. Miller, V.M. John, J.L. Provis, A. Favier, A. Horvath, and K.L. Scrivener, Environmental impacts and decarbonization strategies in the cement and concrete industries. 2020.10.1038/s43017-020-0093-3 ↗
2. Application of rice husk biochar and thermally treated low silica rice husk ash to improve physical properties of cement mortar10.1016/j.tafmec.2019.102376 ↗
3. Effect of yield stress development on the foam-stability of aerated geopolymer concrete10.1016/j.cemconres.2020.106233 ↗
4. Effect of waste rice husk ash from rice husk fuelled brick kilns on strength, durability and thermal performances of mortar10.1016/j.conbuildmat.2020.121794 ↗
5. Progress in the adoption of geopolymer cement
6. Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement10.1016/j.jclepro.2011.02.010 ↗
7. Durability of low-calcium fly ash based geopolymer concrete culvert in a saline environment10.1016/j.cemconres.2017.07.010 ↗
8. Sustainable geopolymer concrete using ground granulated blast furnace slag and rice husk ash: Strength and permeability properties10.1016/j.jclepro.2018.08.313 ↗
9. Waste Clay Bricks as a Geopolymer Binder for Pavement Construction10.3390/su14116456 ↗
10. Effect of different superplasticizers and activator combinations on workability and strength of fly ash based geopolymer10.1016/j.matdes.2014.01.064 ↗
11. Effect of synthesis parameters on the quality of construction and demolition wastes (CDW) geopolymers10.1016/j.apt.2014.11.012 ↗
12. R. Siddique, P. Cachim, Waste and supplementary cementitious materials in concrete: characterisation, properties and applications. 2018: Woodhead Publishing.
13. Pickin · 2020
14. Pickin, J., P. Randell, J. Trinh, and B. Grant, National waste report 2018. 2018, Department of the Environment and Energy.
15. Hyder Consulting Encycle Consulting & Sustainable Resource Solutions, Construction and demolition waste status report. Management of construction and demolition waste in Australia. 2011, Department of sustainability, environment, water, population, communities, Queensland department of environment, and resource management, Queensland, Australia.
16. Investigation of waste clay brick as partial replacement of geopolymer binders for rigid pavement application10.1016/j.conbuildmat.2021.124787 ↗
17. Effect of alkali activator concentration and curing condition on strength and microstructure of waste clay brick powder-based geopolymer10.1016/j.compositesb.2017.10.013 ↗
18. Analysis of the production conditions of geopolymer matrices from natural pozzolana and fired clay brick wastes10.1016/j.conbuildmat.2019.04.247 ↗
19. Recycling and utilization assessment of waste fired clay bricks (Grog) with granulated blast-furnace slag for geopolymer production10.1016/j.psep.2016.08.001 ↗
20. Alkali-activated building materials made with recycled construction and demolition wastes10.1016/j.conbuildmat.2017.05.122 ↗
21. Blended Alkali-activated Fly Ash / Brick Powder Materials10.1016/j.proeng.2016.07.397 ↗
22. Migunthanna · 2022
23. Rheological properties and microstructure of binary waste red brick powder/metakaolin geopolymer10.1016/j.conbuildmat.2018.08.150 ↗
24. Eco-efficient alkali-activated cement based on red clay brick wastes suitable for the manufacturing of building materials10.1016/j.jclepro.2017.07.243 ↗
25. Austroads, Specification and use of geopolymer concrete in the manufacture of structural and non-structural components: Review of literature. 2016, Austroads: Sydney, Australia.
26. One-part alkali-activated materials: A review10.1016/j.cemconres.2017.10.001 ↗
27. Bayuaji, R., A.K. Yasin, T.E. Susanto, and M.S. Darmawan, A review in geopolymer binder with dry mixing method (geopolymer cement). 2017.10.1063/1.5003505 ↗
28. Synthesis of heat and ambient cured one-part geopolymer mixes with different grades of sodium silicate10.1016/j.ceramint.2014.12.154 ↗
29. ASTM, ASTM C109/C109M-20b, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50 mm] Cube Specimens). 2020.
30. ASTM, ASTM C1437-20, Standard test method for flow of hydraulic cement mortar. 2020.
31. ASTM, ASTM C403/C403M-16, Standard test method for time of setting of concrete mixtures by penetration resistance. 2016.
32. ASTM, ASTM C642-21, Standard test method for density, absorption, and voids in hardened concrete. 2021.
33. ASTM, ASTM C1403-15, Standard test method for rate of water absorption of masonry mortars. 2015.
34. ASTM, ASTM C1012/C1012M-18b, Standard test method for length change of hydraulic-cement mortars exposed to a sulfate solution. 2018.
35. Workability, strength and microstructural properties of ground ferronickel slag blended fly ash geopolymer mortar
36. Mechanical properties and reaction mechanism of one-part geopolymer mortars10.1016/j.conbuildmat.2020.121973 ↗
37. Performance of geopolymer mortar cured under ambient temperature10.1016/j.conbuildmat.2020.118090 ↗
38. The role of particle technology in developing sustainable construction materials10.1016/j.apt.2009.10.006 ↗
39. Fly ash effects: I. The morphological effect of fly ash10.1016/S0008-8846(03)00217-5 ↗
40. Behaviour of self compacting concrete using Portland pozzolana cement with different levels of fly ash10.1016/j.matdes.2012.11.015 ↗
41. Effect of fly ash on rheological properties of magnesium oxychloride cement10.1061/(ASCE)MT.1943-5533.0002597 ↗
42. Effects of fly ash and dolomite powder on the properties of self-compacting concrete10.1016/j.conbuildmat.2011.03.018 ↗
43. Development of Cleaner One-part geopolymer from lithium slag
44. Mechanical and microstructural properties of high calcium fly ash one-part geopolymer cement made with granular activator10.1016/j.heliyon.2019.e02255 ↗
45. Properties and microstructure of alkali-activated red clay brick waste10.1016/j.conbuildmat.2013.01.031 ↗
46. Mechanical Properties of Fly Ash-Slag Based Alkali-Activated Materials under the Low-Energy Consummation-Sealed Curing Condition10.1061/(ASCE)MT.1943-5533.0003920 ↗
47. Compressive strength, water absorption, water sorptivity and surface radon exhalation rate of silica fume and fly ash based mortar10.1016/j.jobe.2019.01.011 ↗
48. Evolution of mechanical properties with time of fly-ash-based geopolymer mortars under the effect of granulated ground blast furnace slag addition10.3390/en13051135 ↗
49. Sulfate resistance of hybrid fiber reinforced metakaolin geopolymer composites10.1016/j.compositesb.2019.107689 ↗
50. A survey on one year strength performance of reinforced geopolymer composites10.1016/j.conbuildmat.2020.120267 ↗
51. Effect of sodium silicate and curing regime on properties of load bearing geopolymer mortar block10.1061/(ASCE)MT.1943-5533.0001782 ↗
52. Strength development in clay–fly ash geopolymer10.1016/j.conbuildmat.2012.11.015 ↗
53. One year geopolymerisation of sodium silicate activated fly ash and metakaolin geopolymers10.1016/j.cemconcomp.2018.10.014 ↗
54. Resistance of lignite bottom ash geopolymer mortar to sulfate and sulfuric acid attack10.1016/j.cemconcomp.2012.01.010 ↗
55. Impact Resistance and Sodium Sulphate Attack Testing of Concrete Incorporating Mixed Types of Recycled Plastic Waste10.3390/su13179521 ↗
56. The effects of porosity on mechanical behavior and water absorption of an environmentally friendly cement mortar with recycled rubber10.1016/j.conbuildmat.2017.06.061 ↗
57. The influence of palm oil fuel ash heat treatment on the strength activity, porosity, and water absorption of cement mortar
58. Studies on the microstructure and durability characteristics of ambient cured FA-GGBS based geopolymer mortar10.1016/j.conbuildmat.2022.128538 ↗
59. Utilization of recycled fine powder as an activator in fly ash based geopolymer mortar10.1016/j.conbuildmat.2022.126581 ↗
60. An investigation on the effect of sea sand on the properties of fly ash geopolymer mortars
61. Mechanical, durability and fracture properties of nano-modified FA/GGBS geopolymer mortar10.1680/jmacr.18.00059 ↗
62. Application of waste brick powder in alkali activated aluminosilicates: Functional and environmental aspects10.1016/j.jclepro.2018.05.181 ↗
63. Characterization of geopolymers prepared using powdered brick10.1016/j.jmrt.2019.10.019 ↗
64. Development the properties of brick geopolymer pastes using concrete waste incorporating dolomite aggregate
65. Effect of Polishing Brick Powder on Mortar Sorptivity and its Mechanism
66. Chapter 2 - Inorganic cementing materials
67. High-calcium bottom ash geopolymer: sorptivity, pore size, and resistance to sodium sulfate attack10.1061/(ASCE)MT.1943-5533.0000560 ↗
68. Comparing influence of inert biochar and silica rich biochar on cement mortar – Hydration kinetics and durability under chloride and sulfate environment
69. T. Yang, X. Gao, J. Zhang, X. Zhuang, H. Wang, Z. Zhang, Sulphate resistance of one-part geopolymer synthesized by calcium carbide residue-sodium carbonate-activation of slag, Composites Part B: Engineering, 2022: pp. 110024.10.1016/j.compositesb.2022.110024 ↗
70. Mechanical properties and durability performance of fly ash based mortar containing nano-and micro-silica additives10.1016/j.conbuildmat.2020.119121 ↗
71. External Sulphate Attack on Alkali-Activated Slag and Slag/Fly Ash Concrete10.3390/buildings12020094 ↗
72. Alkali activated cement made from blast furnace slag generated by charcoal: Resistance to attack by sodium and magnesium sulfates10.1016/j.conbuildmat.2019.117710 ↗
73. Influences of Silica Fume on Compressive Strength and Chemical Resistances of High Calcium Fly Ash-Based Alkali-Activated Mortar10.3390/su14052652 ↗
74. Durability of geopolymer materials in sodium and magnesium sulfate solutions10.1016/j.cemconres.2004.09.002 ↗
75. I. Sims, J. Lay, and J. Ferrari, 15 - Concrete Aggregates, in Lea's Chemistry of Cement and Concrete (Fifth Edition), P.C. Hewlett and M. Liska, Editors. 2019, Butterworth-Heinemann. p. 699-778.10.1016/B978-0-08-100773-0.00015-0 ↗
76. The influence of Si/Al ratio on sulfate durability of metakaolin-based geopolymer10.1016/j.conbuildmat.2020.120735 ↗