A study of fresh and engineering properties of self-compacting high slag concrete (SCHSC)
Source abstract
Abstract
Abstract This study examined the properties of freshly poured self-compacting concrete with a fixed water–cement ratio of 0.37 in which a portion of the cement was replaced by furnace slag in weight ratios of 0%, 15% and 30%. The fresh and various engineering properties are discussed. The results showed that the slump flow varied with the replacement ratio of furnace slag for Portland cement. The slump flow for the 15% furnace slag sample was within the design value of 550–700 mm. The compressive strength of the 15% furnace slag replacement sample was higher than that of the control group. The shrinkage increased as the amount of slag added increased. The cores were drilled from upper, middle and lower layers of the field MOCK-UP model specimen, and the appearance was noted. It was obvious that the SCHSC specimen had no bleeding pores or aggregate segregation. When concrete containing furnace slag is used in self-compacting concrete structures, the fresh and engineering properties can be improved, and the waste resource can be reused. The results of laboratory test are comparable with mock-up tests.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Concrete and Cement Materials Research · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Teng YT. Effect of workability and formwork materials on surface characteristics of concrete. Institute of civil engineering national Taiwan university for the Degree of Master of Engineering; 2010.
2. Performance-based design and carbonation of concrete with high fly ash content10.1016/j.cemconcomp.2011.07.005 ↗
3. Study of two concrete mix-design strategies to reach carbon mitigation objectives10.1016/j.cemconcomp.2009.04.001 ↗
4. Effect of mineral admixtures on properties of self-compacting concrete10.1016/j.cemconcomp.2011.04.005 ↗
5. Self-compacting concrete with different levels of pulverized fuel ash10.1016/j.conbuildmat.2009.12.012 ↗
6. Influence of cement type on ITZ porosity and chloride resistance of self-compacting concrete10.1016/j.cemconcomp.2009.11.007 ↗
7. Properties of self-compacting concrete prepared with coarse and fine recycled concrete aggregates10.1016/j.cemconcomp.2009.06.005 ↗
8. ALHC El Debs. Hardened properties of selfcompacting concrete – a statistical approach. Journal of10.1016/j.conbuildmat.2010.02.032 ↗
9. Effect of slag on the rheology of fresh self-compacted concrete10.1016/j.conbuildmat.2009.02.029 ↗
10. Effect of mineral filler type on autogenous shrinkage of self-compacting concrete10.1016/j.cemconres.2010.01.014 ↗
11. Walraven J. High performance concrete a material with a large potential. In: 8th International symposium on utilization of high-strength and high-performance concrete, Tokyo; 2008. p. 1–12.
12. Synthesis working mechanism and effectiveness of a novel cycloaliphatic superplasticizer for concrete
13. Correlation between L-box test and rheological parameters of a homogeneous yield stress fluid10.1016/j.cemconres.2006.05.001 ↗
14. Chou CJ. Effects of fly ash and slag on compressive strength and toughness of high performance concrete. Institute of civil engineering national chung hsing university for the degree of master of engineering; 2009.
15. Influence of hydration on the fluidity of normal Portland cement pastes10.1016/j.cemconres.2008.03.003 ↗
16. Combined effect of mineral admixtures with superplasticizers on the fluidity of the blended cement paste10.1016/j.conbuildmat.2010.01.015 ↗
17. Interaction of polycarboxylate-based superplasticizers with cements containing different C3A amounts10.1016/j.cemconcomp.2009.01.005 ↗
18. Influence of cement-admixture interaction on the stability of production properties of SCC
19. Kubens S, Wallevik O. Interaction of cement and admixtures – the influence of cement deliveries on rheological properties. In: Proceedings of the 16th iBausil, Weimar, Germany; 2006. p. 10679–86.
20. Rheological characterization of SCC mortars and pastes with changes induced by cement delivery10.1016/j.cemconcomp.2010.09.019 ↗
21. The effects of elevated temperature on cement paste containing GGBFS10.1016/j.cemconcomp.2007.12.003 ↗
22. Metha PK. Pozzolanic and cementitious by productions as mineral admixtures for concrete – a critical review. First international conference on the use of fly ash, Silica Fume, Slag and other Mineral By – products in Concrete Canada 1983. ACI SP-79; 1983. p. 1–46.
23. ASTM C150. Standard specification for Portland cement.
24. CNS 12549. Cconcrete and mortar material water quenched blast furnace slag powder.
25. ASTM C33. Standard Specification for Concrete Aggregates.
26. ASTM C94. Standard specification for ready-mixed concrete.
27. ASTM C494. Standard specification for chemical admixtures for concrete.