Chemical reactivity of lightweight aggregate in cement paste
Source abstract
Abstract
Abstract Quantitative investigation on the chemical reactivity of lightweight aggregate (LWA) in cement paste is important to enrich our understanding of the role played by LWA in influencing the microstructure of the interfacial transition zone (ITZ). In this paper, three types of LWA (YT, NT and FT) were chosen, which are based on shale rock, expanded clay and sintered fly ash respectively, and the ion concentration, calcium hydroxide (CH) content and reaction degree of LWA in cement pastes at different curing ages were studied, the fly ash (FA) was also included for comparison. The results show that, all the types of LWA studied showed chemical activity, which absorb very significant amounts of Ca2+ and OH−, and released significant amounts of Si4+ into cement solution. The CH reduction content of the paste also indicates that the LWA have pozzolanic reactivity, especially in the later period the pozzolanic reaction become the main part of the hydration, but the reaction degree of them is slightly lower than that of FA. In addition, with the increase of the water–binder ratio, the reaction degree of FA and LWA has some increase as well. Although LWA in the form of a powder is more reactive than in the form of a coarse aggregate, the XRD results also show that the CH peak height of the ITZ samples around different types of LWA have a small decrease, in contrast to the bulk cement paste. The results obtained confirm that the dense ITZ around LWA was not only characterized by the water absorbing and mechanical interlocking, the chemical reaction at the interface also has some contribution.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Concrete Properties and Behavior · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Influence of aggregate size, water cement ratio and age on the microstructure of the interfacial zone[J]10.1016/S0008-8846(03)00205-9 ↗
2. Porous structure of the ITZ around galvanized and ordinary steel reinforcement[J]10.1016/S0008-8846(01)00597-X ↗
3. Backscattered electron imaging of cementitious microstructures: understanding and quantification[J]10.1016/j.cemconcomp.2004.02.029 ↗
4. Penetration of cement paste into lightweight aggregate[J]10.1016/0008-8846(92)90135-I ↗
5. Interdependence of microstructure and strength of structural lightweight aggregate concrete[J]
6. Microstructure Interfacial effects and micromechanics of cementitious composites[J]
7. Microstructure of the interfacial zone between lightweight aggregate and cement paste[J]10.1016/0008-8846(90)90103-5 ↗
8. Effect of ceramsite structure on microstructure of interfacial zone and durability of combined aggregate concrete[J]10.1007/s11595-009-1145-1 ↗
9. Interface structure between lightweight aggregate and cement paste[J]
10. Pozzolanic reactivity of lightweight aggregates[J]10.1016/0008-8846(90)90050-8 ↗
11. Interfacial interactions in lightweight aggregate concretes and their influence on the concrete strength[J]10.1016/0958-9465(96)00002-9 ↗
12. Effect of lightweight aggregate pre-wetting on microstructure and permeability of mixed aggregate concrete[J]10.1007/s11595-009-5838-2 ↗
13. Microstructure and mechanical properties of shale ceramsite concrete[J]10.4028/www.scientific.net/KEM.302-303.371 ↗
14. Aggregate–cement chemical interaction[J]10.1016/S0008-8846(98)00067-2 ↗
15. Li · 2003
16. Assessment method of hydration degree of cement in complex binder based on the calcium hydroxide content[J]