Strength development characteristics of UP-MMA based polymer concrete with different curing temperature
Source abstract
Abstract
Abstract In this study, the effects of curing temperature, age, and unsaturated polyester (UP)-methyl methacrylate (MMA) ratio on the strength development characteristics of UP-MMA based polymer concrete are investigated. This study distinguishes itself from previous research in that MMA monomer was used to adjust the viscosity of UP resin, instead of styrene monomer. The result showed that as the curing temperature decreased from 20 to −20 °C, the strengths were reduced by 32.8% on average. Also, research revealed that the UP-MMA based polymer concrete significantly develops its strengths within the first 6 h, and the average strength at 72 h was 86.6% of the strength at 168 h. As the MMA content increases, the strengths of UP-MMA based polymer concrete tended to decrease. However, the effect of MMA on the strength reduction was less significant than that of curing temperature. Also, this study proposes a strength predictive model based on the maturity concept. The result of regression analysis between the measured strengths and computed maturity yielded high coefficients of determination of 0.91–0.97, validating the applicability of the maturity model suggested by Ohama. The findings of this study could be utilized as important data for field applications as well as manufacturing of precast products.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. Study of the behavior of polyester concrete containing ionomers as curing agent10.1002/app.27629 ↗
2. Low-temperature curing of polymethyl methacrylate polymer concrete
3. Fowler DW, Meyer AH, Paul DR. Low temperature curing of polymer concrete. In: Proceedings of the 3rd international congress on polymers in concrete, Koriyama; 2007. p. 421–34.
4. Effects of thermal cycles on mechanical properties of an optimized polymer concrete10.1016/j.conbuildmat.2011.03.047 ↗
5. Compressive strength of gamma-irradiated polymer concrete10.1002/pc.20432 ↗
6. Study of the modulus of elasticity of polymer concrete compounds and comparative assessment of polymer concrete and portland cement concrete10.1016/j.cemconres.2004.03.012 ↗
7. Mechanical properties of high strength polymer concrete using unsaturated polyester resin
8. Mechanical behaviour of polymer concrete systems10.1007/BF02481825 ↗
9. Influences of metallic polymeric materials on the properties of fresh polyester and acrylic polymer concrete10.1002/app.22846 ↗
10. Factors affecting the curing and strength of polymer concrete
11. Improvement of the strength of acrylic emulsion polymer-modified mortar in high temperature and high humidity by blast furnace slag10.1007/s12205-009-0023-x ↗
12. Influence of soaking and polymerization conditions on the properties of polymer concrete10.1016/j.conbuildmat.2005.02.003 ↗
13. Improvement of strength and chemical resistance of silicate polymer concrete10.4334/IJCSM.2009.3.2.097 ↗
14. Effect of filler and shrinkage reducing agent influencing on setting shrinkage and strength properties of MMA-modified polymer paste10.4334/JKCI.2006.18.2.227 ↗
15. A study on the early strength prediction of lightweight polymer mortars by the maturity method
16. Neville · 1995
17. Maturity of concrete: method for predicting early-stage strength
18. Variation of application period of cold weather concrete in Korea10.4334/JKCI.2005.17.2.237 ↗
19. The effect of low temperature curing on compressive strength of ordinary and high performance concrete10.1016/j.conbuildmat.2004.04.033 ↗