Flexural response of polymer concrete filled steel beams
Source abstract
Abstract
Abstract In view of the mounting cost of rehabilitating deteriorating infrastructure, further compounded by intensified environmental concerns, it is now obvious that the evolvement and application of advanced composite structural materials to complement conventional construction materials is a necessity for sustainable construction. This study seeks alternative fill materials (polymer-based) to the much-limited cement concrete used in concrete-filled steel tubular structures. Polymers have been successfully used in other industries and are known to be much lighter, possess high tensile strength, durable and resistant to aggressive environments. Findings of this study relating to elasto-plastic characteristics of polymer concrete filled steel composite beams subjected to uniform bending highlight the enormous increase in stiffness, strength and ductility of the composite beams, over the empty steel tube. Moreover, polymer based materials were noted to present a wide array of properties that could be tailored to meet specific design requirements, e.g. ductility based design or strength based design.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Flexural behaviour of polymer concrete10.1016/S0950-0618(99)00030-6 ↗
2. Characterization of ecocement pastes and mortars produced from incinerated ashes10.1016/S0008-8846(00)00467-1 ↗
3. Cementitious materials—nine millennia and a new century: past, present and future10.1061/(ASCE)0899-1561(2002)14:1(2) ↗
4. Polymers in concrete: a vision for the 21st century10.1016/S0958-9465(99)00032-3 ↗
5. Assessment of life-cycle benefit-cost of composites in construction10.1061/(ASCE)1090-0268(2000)4:3(103) ↗
6. An experimental study on the bending capacities of steel pipes filled with air mortar of different compressive strength and concrete
7. Polymer-modified concrete: review10.1061/(ASCE)0899-1561(1997)9:2(85) ↗
8. Impact of Hanshin/Awaji earthquake on seismic design and seismic strengthening of highway bridges
9. Ultimate strength and ductility of state-of-the-art concrete-filled steel bridge piers in Japan10.1016/S0141-0296(97)00026-6 ↗
10. Experimental study on ultimate strength and ductility of concrete filled steel columns under strong earthquake10.1016/S0143-974X(99)00006-1 ↗
11. Stability problems in steel-concrete composite members and elements
12. Principle of latex modification and some typical properties of latex-modified mortars and concretes
13. Elasto-plastic behaviour of axially loaded filled circular steel stub columns
14. Flexural deformation characteristics of filled steel beams subjected to pure bending
15. Oyawa WO, Sugiura K, Watanabe E. Polymer concrete in filled steel composite members under compressive load, J Constr Build Mater, Elsevier Science 2001; 187–19710.1016/S0950-0618(00)00034-9 ↗
16. Construction use of municipal-solid-waste ash10.1061/(ASCE)0733-9402(1995)121:1(2) ↗
17. Flexural strength of reinforced polymer concrete made with recycled plastic waste
18. An experimental study of the plastic buckling of circular cylinders in pure bending10.1016/0020-7683(79)90066-0 ↗
19. State-of-the-art of concrete-filled steel tubular columns
20. Development of strength and fracture properties of styrene–butadiene copolymer latex-modified concrete
21. Furan resin polymer concrete in the commonwealth of independent states (CIS)
22. Ductility of concrete-filled steel box columns under cyclic loading10.1061/(ASCE)0733-9445(1994)120:7(2021) ↗