journal article·2016-09

Modelling of the pre and post-cracking response of the PVA fibre reinforced concrete subjected to direct tension

Sadaqat Ullah Khan, Tehmina Ayub

Publisher page

Abstract

Abstract The strain-hardening response is always associated with high performance fibre reinforced composites in which coarse aggregates are completely eliminated. However, the use of higher binder content, cost and relatively low modulus of elasticity limit their structural application. In this study, the response of conventional high performance fibre reinforced concrete (HPFRC) with coarse aggregates containing polyvinyl alcohol (PVA) fibres under direct tension has been observed. The models were proposed and validated through experimental investigation. Total three mixes of concrete having same binder content with macro size polyvinyl alcohol (PVA) fibres were investigated. Metakaolin and silica fume were used as 10% cement replacing material in two of the mixes to minimise the cement content and to optimise the bond strength of the fibres with lower binder content. Single fibre pull-out test was also performed to observe and develop the relation of the post-cracking response of the fibres and matrix. It was found that concrete in the presence of PVA fibres attained strain-hardening response with a drop in the load up to 50% of the peak load and the strain capacity of about 2% under direct tension. The post-cracking relation based on single fibre pull-out test closely matches the results of direct tension test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. Committee ACI · 1996
2. Mehta · 2006
3. Analytical model for tensile behavior of steel-fiber concrete
4. Fibre reinforced cement-based (FRC) composites after over 40years of development in building and civil engineering10.1016/j.compstruct.2008.03.006 ↗
5. Corrosion of steel fibre reinforced concrete from the cracks10.1016/j.cemconres.2004.06.032 ↗
6. Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete10.1016/j.matdes.2014.01.056 ↗
7. Mechanical and thermal evaluation of Ultra High Performance Fiber Reinforced Concretes for engineering applications10.1016/j.conbuildmat.2011.06.023 ↗
8. Improvement of the Post Fracture Behaviour of UHPC by Fibres
9. Influence of aggregate and curing regime on the mechanical properties of ultra-high performance fibre reinforced concrete (UHPFRC)10.1016/j.conbuildmat.2008.11.012 ↗
10. Durability performance of ductile concrete structures
11. Measuring and modifying interface properties of PVA fibers in ECC matrix10.1061/(ASCE)0899-1561(2001)13:6(399) ↗
12. Influence of PVA fibers on Load Carrying Capacity of Concrete with Coarse Aggregates
13. Properties of Polyvinylalcohol fiber as reinforcing materials for cementitious composites
14. Improving the mechanical properties of concrete elements by bendable concretes
15. Engineered cementitious composites for structural applications10.1061/(ASCE)0899-1561(1998)10:2(66) ↗
16. Postcrack scaling relations for fiber reinforced cementitious composites10.1061/(ASCE)0899-1561(1992)4:1(41) ↗
17. 1992 Constitutive modelling of fibre-reinforced concrete under uniaxial tensile loading
18. Meskenas A, Ulbinas D. Discrete crack model of steel fibre reinforced concrete members subjected to tension. 2011.
19. Analytical moel for tensile behavior of steel-fiber concrete
20. Stress-strain relationship for plain concrete in compression
21. Calcined kaolin as cement replacing material and its use in high strength concrete10.1016/j.conbuildmat.2015.02.050 ↗
22. Comparison of Physical and Chemical Properties of Micro-Silica and Locally Produced Metakaolin and Effect on the Properties of Concrete
23. Mechanical characteristics of hardened concrete with different mineral admixtures: a review10.1155/2014/875082 ↗
24. High performance concrete—an overview10.1007/BF02486473 ↗
25. Neville · 2010
26. Admixture W-R. ASTM C 494/C 494M. Type B.3.
27. Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
28. 143 AC · 2010
29. Recommendation for a design and construction of high performance fiber reinforced cementitious composites with multiple fine cracks (HPFRCC)
30. CARDIFRC®-Development and mechanical properties. Part III: Uniaxial tensile response and other mechanical properties10.1680/macr.2005.57.8.433 ↗
31. Proposed classification of HPFRC composites based on their tensile response10.1617/s11527-006-9103-2 ↗
32. Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression West Conshohochen
33. Standard A. Standard test method for compressive strength of cylindrical concrete specimens. C39–86. 1997:20–4.
34. American Concrete Institute
35. ACI Committee 363. State-of-the-Art Report on High-Strength Concrete. ACI 363R–92: ACI; 1992.
36. Microstructural properties and pozzolanic activity of calcined kaolins as supplementary cementing materials10.1139/cjce-2011-0586 ↗
37. Comparison of two metakaolins and a silica fume used as supplementary cementitious materials
38. Effect of high temperatures on high performance steel fibre reinforced concrete10.1016/j.cemconres.2006.03.024 ↗
39. Microstructural observations in new matrix glass fibre reinforced cement10.1016/S0008-8846(00)00407-5 ↗
40. Fibre-reinforced concrete: a versatile construction material10.1016/0360-1323(91)90054-F ↗
41. Synthetic fibre-reinforced concrete10.1016/0079-6700(94)00030-6 ↗
42. The relationships between stress and strain for high-performance concrete with metakaolin10.1016/S0008-8846(01)00612-3 ↗
43. High performance fiber reinforced cement composites with innovative slip hardening twisted steel fibers10.4334/IJCSM.2009.3.2.119 ↗
44. High reactivity metakaolin (HRM): a new generation mineral admixture for high performance concrete
45. Combined effect of aggregate and mineral admixtures on tensile ductility of engineered cementitious composites