journal article·2016-09

Fracture behaviour and microstructural evolution of structural mild steel under the multi-hazard loading of high-strain-rate load followed by elevated temperature

Mahsa Mirmomeni, Amin Heidarpour, Xiao-Ling Zhao, Christopher R. Hutchinson, Jeffrey A. Packer, Chengqing Wu

Publisher page

Abstract

Abstract This paper presents the mechanical properties, microstructure evolution and fracture behaviour of structural mild steel subject to the multi-hazard loading scenario of post-impact-fire. Two-phase tensile tests were conducted on mild steel coupons to assess the coupling effect of strain-rate and subsequent temperature at three pre-determined deformation levels. Stress-strain characteristics of pre-damaged steel at different temperatures have been interpreted using well known metallurgical concepts. Scanning Electron Microscopy (SEM) fractographs have been utilized to detect pertinent microstructural alterations. Results indicate that the strength, energy absorption and ductility of steel material at elevated temperatures largely depend on the pre-deformation history of the material caused by high strain rate loading, with this effect dwindling at very high temperatures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Fire effects on concrete materials · Structural Response to Dynamic Loads · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. AISC360 · 2010
2. Constitutive equations for hot-working of metals10.1016/0749-6419(85)90004-X ↗
3. Anderson · 2005
4. Arsenault · 2013 · vol. 6
5. AS2291 · 2007
6. AS3678 · 1990
7. ASTM-E8 · 2011
8. On the determination of true stress triaxiality in sheet metal10.1016/j.jmatprotec.2006.11.031 ↗
9. Determination of the high strain rate fracture properties of ductile materials using a combined experimental/numerical approach10.1016/j.ijimpeng.2004.01.006 ↗
10. BS5950-8 · 2003
11. Mechanical behaviour of quenched and self-tempered reinforcing steel in tension under high strain rate10.1016/j.matdes.2013.02.008 ↗
12. Behavior of high strength structural steel at elevated temperatures10.1061/(ASCE)0733-9445(2006)132:12(1948) ↗
13. An introduction to the mechanical properties of structural steel at elevated temperatures10.1016/0379-7112(88)90032-X ↗
14. LXXXVI. A note on the Portevin-Le Chatelier effect10.1080/14786440808520347 ↗
15. Dieter · 1986 · vol. 3
16. Damage evaluation of the steel tubular column subjected to explosion and post-explosion fire condition10.1016/j.engstruct.2012.01.013 ↗
17. Tensile properties of mild steel under high strain rates
18. EN1993-1-2 · 2005
19. Follansbee · 1988
20. Recovery and recrystallization during high temperature deformation of α-iron10.1007/BF02643086 ↗
21. An integrated adaptive environment for fire and explosion analysis of steel frames — Part II: verification and application10.1016/S0143-974X(99)00041-3 ↗
22. Performance of innovative fabricated long hollow columns under axial compression10.1016/j.jcsr.2014.12.013 ↗
23. A constitutive model and data for metals subjected to large strains, high strain rates and high temperatures
24. High temperature properties of hot-rolled, structural steels for use in fire engineering design studies10.1016/0379-7112(88)90030-6 ↗
25. Influence of the strain-rate on the mechanical properties of mild carbon steel at elevated temperatures10.1016/j.matdes.2013.01.021 ↗
26. High-temperature properties of steel for fire resistance modeling of structures10.1061/(ASCE)MT.1943-5533.0000041 ↗
27. The effects of temperature and strain rate on the dynamic flow behaviour of different steels10.1016/j.msea.2006.03.087 ↗
28. Microstructural effects of high strain rate deformation
29. Explosion and fire analysis of steel frames using fiber element approach10.1061/(ASCE)0733-9445(2004)130:7(991) ↗
30. Mechanical properties of partially damaged structural steel induced by high strain rate loading at elevated temperatures – an experimental investigation10.1016/j.ijimpeng.2014.10.001 ↗
31. Innovative hollow corrugated columns: a fundamental study10.1016/j.engstruct.2015.03.028 ↗
32. NIST-NCSTAR-1 · 2005
33. Stress-strain-temperature relationship for structural steel10.1061/(ASCE)0899-1561(2001)13:5(371) ↗
34. Pytel · 2011
35. Reddy · 2002
36. Adiabatic plastic deformation10.1146/annurev.ms.09.080179.001435 ↗
37. Rollett · 2004
38. Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures10.1016/j.conbuildmat.2013.11.042 ↗
39. An integrated adaptive environment for fire and explosion analysis of steel frames – Part I: analytical models10.1016/S0143-974X(99)00040-1 ↗
40. Performance of unstiffened welded steel i-beam to hollow tubular column connections under seismic loading
41. High strain rate behaviour of cold-formed rectangular hollow sections10.1016/j.engstruct.2014.01.023 ↗
42. Comparison of the static and dynamic fracture behaviour of an AE-460 structural steel10.1016/S0013-7944(00)00037-0 ↗
43. Theory of the effect of dynamic strain aging on mechanical properties10.1002/pssa.2210300120 ↗
44. Effect of strain rate upon plastic flow of steel10.1063/1.1707363 ↗
45. Dislocation-mechanics-based constitutive relations for material dynamics calculations10.1063/1.338024 ↗
46. Preparation and preservation of fracture specimens