journal article·2016-10

Facile growth of carbon nanotubes coated with carbon nanoparticles: A potential low-cost hybrid nanoadditive for improved mechanical, electrical, microstructural and crystalline properties of cement mortar matrix

Snigdha Sharma, N.C. Kothiyal

Publisher page

Abstract

Abstract A low-cost synthesis of Raw Carbon Nanotubes (RCNT) from petroleum refinery waste is presented. RCNT was incorporated in cement matrix at 0.125%, 0.25%, 0.50% and 1.00% by wt. of cement. Mechanical, electrical, microstructural and crystalline properties of Raw Carbon Nanotube-Cement Nanocomposites (RCNT-CNCs) were evaluated after 28 days, and compared with Pure Carbon Nanotube-Cement Nanocomposites (PCNT-CNCs) and Pure Carbon Nanoparticle-Cement Nanocomposites (PCNP-CNCs). Nanocomposites with 0.50 wt% RCNT, 1.00 wt% PCNP and 0.25 wt% PCNT respectively exhibited rise of 18%, 8% and 37% in compressive strength and 34%, 22% and 57% in flexural strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Smart Materials for Construction · Carbon Nanotubes in Composites · Advanced Energy Technologies and Civil Engineering Innovations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (72)

Show source-provided references
1. Helical microtubules of graphitic carbon10.1038/354056a0 ↗
2. Carbon nanotube films as field emitters10.1016/S0008-6223(02)00011-8 ↗
3. Applications of carbon nanotubes in drug delivery10.1016/j.cbpa.2005.10.005 ↗
4. Surfactant-assisted processing of carbon nanotube/polymer composites10.1021/cm9906396 ↗
5. Preparation and mechanical properties of chitosan/carbon nanotubes composites10.1021/bm050378v ↗
6. Multifunctional composites using reinforced laminae with carbon nanotube forests10.1038/nmat1650 ↗
7. Processing-structure-multi-functional property relationship in carbon nanotube/epoxy composites10.1016/j.carbon.2006.05.014 ↗
8. Exceptionally high Young’s modulus observed for individual carbon nanotubes10.1038/381678a0 ↗
9. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
10. Measurements of near-ultimate strength for multiwalled carbon nanotubes and irradiation-induced crosslinking improvements10.1038/nnano.2008.211 ↗
11. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
12. Superhard phase composed of single-wall carbon nanotubes10.1103/PhysRevB.65.033408 ↗
13. A new structure for multi-walled carbon nanotubes reinforced alumina nanocomposite with high strength and toughness10.1016/j.matlet.2007.06.025 ↗
14. Fabrication and mechanical/conductive properties of multi-walled carbon nanotube (MWNT) reinforced carbon matrix composites10.1016/j.matlet.2005.05.021 ↗
15. Fabrication and properties of dispersed carbon nanotube-aluminum composites10.1016/j.msea.2009.01.002 ↗
16. Processing and modeling of conductive thermoplastic/carbon nanotube films10.1016/j.compositesb.2007.02.024 ↗
17. Fabrication process of carbon nanotubes/light metal matrix composites by squeeze casting10.1016/j.msea.2007.11.088 ↗
18. Tribological application of carbon nanotubes in a metal-based composite coating and composites10.1016/S0008-6223(02)00265-8 ↗
19. Fracture toughness and fatigue life of MWCNT/epoxy composites10.1016/j.msea.2008.04.051 ↗
20. Multiwalled carbon nanotube reinforced polymer composites10.1016/j.msea.2007.08.078 ↗
21. Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes
22. Reinforcement mechanisms in MWCNT-filled polycarbonate10.1016/j.compscitech.2005.10.004 ↗
23. Fabrication and mechanical properties of multi-walled carbon nanotubes/epoxy nanocomposites10.1016/j.msea.2006.09.138 ↗
24. Small but strong: a review of the mechanical properties of carbon nanotube-polymer composites10.1016/j.carbon.2006.02.038 ↗
25. A critical review on nanotube and nanotube/nanoclay polymer composite materials10.1016/j.compositesb.2006.02.020 ↗
26. Effect of jute as fiber reinforcement controlling the hydration characteristics of cement matrix10.1021/ie300607r ↗
27. Influence of fiber dispersion on the performance of microfiber reinforced cement composites
28. Microstructure and macroscopic properties of hybrid carbon nanofiber/silica fume cement composites10.1016/j.compscitech.2009.03.006 ↗
29. Improved piezoresistive sensitivity and stability of CNT/cement mortar composites with low water–binder ratio10.1016/j.compstruct.2014.06.007 ↗
30. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
31. On the aspect ratio effect of multi-walled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites10.1016/j.conbuildmat.2012.04.086 ↗
32. Hybrid effect of carbon nanotube and nano-clay on physico-mechanical properties of cement mortar10.1016/j.conbuildmat.2010.06.046 ↗
33. A review on nanomaterial dispersion, microstructure, and mechanical properties of carbon nanotube and nanofiber reinforced cementitious composites10.1155/2013/710175 ↗
34. Nanotechnology in construction
35. J.M. Makar, J. Margeson, J. Luh, in: Proceedings of the 3rd international conference on construction materials: performance, innovations and structural implications, Vancouver, BC, Canada, 2005, pp. 1–10.
36. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nano-composites10.1016/j.cemconcomp.2009.10.007 ↗
37. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
38. Fabrication of piezoresistive CNT/CNF cementitious composites with superplasticizer as dispersant10.1061/(ASCE)MT.1943-5533.0000435 ↗
39. Short time synthesis of high quality carbon nanotubes with high rates by CVD of methane on continuously emerged iron nanoparticles10.1016/j.apsusc.2011.05.086 ↗
40. High-yield synthesis of multi-walled carbon nanotubes by catalytic decomposition of ethane over iron supported over alumina catalyst10.1016/j.cattod.2005.02.031 ↗
41. C2H6 as an active carbon source for a large scale synthesis of carbon nanotubes by chemical vapor deposition10.1016/j.apcata.2004.10.016 ↗
42. Synthesis and magnetic properties of aligned carbon nanotubes by microwave assisted pyrolysis of acetylene10.1016/j.physe.2013.06.022 ↗
43. Hot filament CVD of Fe–Cr catalyst for thermal CVD carbon nanotube growth from liquid petroleum gas10.1016/j.apsusc.2009.08.090 ↗
44. Synergistic effect of zero-dimensional spherical carbon nanoparticles and one-dimensional carbon nanotubes on properties of cement-based ceramic matrix: microstructural perspectives and crystallization investigations10.1080/09276440.2015.1076281 ↗
45. Enhanced effect of carbon nanotube on mechanical and electrical properties of cement composites by incorporation of silica fume10.1016/j.compstruct.2013.07.042 ↗
46. Electrode design, measuring method and data acquisition system of carbon fiber cement paste piezoresistive sensors10.1016/j.sna.2006.08.003 ↗
47. Electric polarization in carbon fiber-reinforced cement10.1016/S0008-8846(00)00382-3 ↗
48. Electronic structure and optical limiting behavior of carbon nanotubes10.1103/PhysRevLett.82.2548 ↗
49. Influence of Ni-Co catalyst composition on nitrogen content in carbon nanotubes10.1021/jp048736w ↗
50. Effect of graphene oxide nanosheets of microstructure and mechanical properties of cement composites10.1016/j.conbuildmat.2013.08.022 ↗
51. Use of X-ray diffraction to quantify amorphous supplementary cementitious materials in anhydrous and hydrated blended cements10.1016/j.cemconres.2014.06.011 ↗
52. Influence of graphene oxide as dispersed phase in cement mortar matrix in defining the crystal patterns of cement hydrates and its effect on mechanical, microstructural and crystallization properties10.1039/C5RA08078A ↗
53. Comparative effects of pristine and ball-milled graphene oxide on physico-chemical characteristics of cement mortar nanocomposites10.1016/j.conbuildmat.2016.04.019 ↗
54. Influence of colloidal nanosilica on ultrafine cement hydration: Physico-chemical and microstructural characterization10.1016/j.conbuildmat.2012.04.022 ↗
55. Hydration study of ordinary portland cement in the presence of zinc ions10.1590/S1516-14392007000400002 ↗
56. Computation of X-ray powder diffractograms of cement components and its application to phase analysis and hydration performance of OPC cement10.1007/s12034-011-0134-0 ↗
57. Wallenberger · 2000
58. Capillarity and wetting of carbon nanotubes10.1126/science.265.5180.1850 ↗
59. Fluid flow in carbon nanotubes and nanopipes10.1038/nnano.2006.175 ↗
60. Nanocapillarity in fullerene tubules10.1103/PhysRevLett.69.2689 ↗
61. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
62. Effects of the chemical structure on the properties of polycarboxylate-type superplasticizer10.1016/S0008-8846(99)00230-6 ↗
63. Influence of kind and added timing organic admixture on the composition, structure and property of fresh cement paste10.1016/0008-8846(95)00021-6 ↗
64. Electrical resistance of carbon-nanofiber concrete10.1088/0964-1726/18/9/095039 ↗
65. Electrical resistivity measurements of portland cement based materials10.1016/0008-8846(83)90057-1 ↗
66. Self sensing carbon nanotube (CNT) and nanofiber (CNF) cementitious composites for real time damage assessment in smart structures10.1016/j.cemconcomp.2014.07.003 ↗
67. Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials10.1016/j.mser.2013.06.001 ↗
68. Development of cement-based strain sensor for health monitoring of ultra high strength concrete10.1016/j.conbuildmat.2014.04.105 ↗
69. Cement-based sensors with carbon fibers and carbon nanotubes for piezoresistive sensing10.1016/j.cemconcomp.2012.04.007 ↗
70. Nano-carbon black and carbon fiber as conductive materials for the diagnosing of the damage of concrete beam10.1016/j.conbuildmat.2013.02.010 ↗
71. Self-deicing road system with a CNFP high-efficiency thermal source and MWCNT/cement-based high-thermal conductive composites10.1016/j.coldregions.2012.10.007 ↗
72. Concrete pavement deicing with carbon fiber heating wires10.1016/j.coldregions.2010.10.010 ↗