journal article·2016-11

Investigation of early-stage strength for cold recycled asphalt mixture using foamed asphalt

Zhigang Li, Peiwen Hao, Hongying Liu, Jinzhi Xu, Zhijun Chen

Publisher page

Abstract

Abstract This papers aims at investigating the strength properties of cold recycled mixtures using foamed asphalt (CRMF) at its early-stage of curing. Indirect tensile strength (ITS) and deformation-strength test were used to figure out the early-stage strength development law of the CRMF. Through image processing and analysis the fracture interface characteristics of CRMF were identified. Statistical methods were used to analyze the amounts of air voids in the CRMF specimens and a two-parameter Weibull model was used to describe the distribution of air voids in the CRMF using X-ray computed tomography (CT) technique. The results indicated that moisture content had a significant effect on the strength of CRMF. Moreover, cement only affected the early strength while the foamed asphalt affected the long-term strength of CRMF. The fracture path was developed along the weak interface where there was moisture membrane especially at 0–3 days curing. The asphalt mastic may be broken off forming the fracture path as the curing continuing after 3 days of curing. The X-ray CT test indicated that a weak hydration products interface was destroyed and two voids were interconnected to become one large void. However, variations of the voids amounts had almost no significant effect to the Weibull distribution of air voids in CRMF. The findings helps us to understand well to the development mechanism of early-stage strength of CRMF and lead us to new approaches to improve the early-stage strength.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Geotechnical Engineering and Underground Structures

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. The theoretical analysis of the RAP aged asphalt influence on the performance of asphalt emulsion cold recycled mixes10.1016/j.conbuildmat.2014.09.002 ↗
2. Modeling the effects on energy and carbon dioxide from the use of recycled asphalt pavement in hot mix asphalt10.1080/15568318.2012.662579 ↗
3. Recycled asphalt mixtures produced with high percentage of different waste materials
4. Research on development mechanism of early-stage strength for cold recycled asphalt mixture using emulsion asphalt10.1016/j.conbuildmat.2015.09.019 ↗
5. Impacts of curing time and moisture content on engineering properties of cold in-place recycling mixtures using foamed or emulsified asphalt10.1061/(ASCE)MT.1943-5533.0000209 ↗
6. Impacts of laboratory curing condition on indirect tensile strength of cold in-place recycling mixtures using foamed asphalt10.1061/41005(329)19 ↗
7. Curing and temperature sensitivity of cement–bitumen treated materials10.1080/10298436.2014.966710 ↗
8. Properties of Cold Asphalt Emulsion Mixtures (CAEMs) using materials from old road pavement milling10.1016/j.proeng.2014.12.208 ↗
9. Investigation of the curing mechanism of foamed asphalt mixes based on micromechanics principles10.1061/(ASCE)MT.1943-5533.0000009 ↗
10. Laboratory investigation on mechanical performance of cold foamed bitumen mixes: bitumen source, foaming additive, fiber-reinforcement and cement effect10.1016/j.conbuildmat.2015.05.116 ↗
11. Synthesis of standards and procedures for specimen preparation and in-field evaluation of cold-recycled asphalt mixtures10.1080/14680629.2013.866707 ↗
12. Strength mechanism and influence factors for cold recycled asphalt mixture10.1155/2015/181853 ↗
13. Laboratory study on mechanical parameters of foamed bitumen mixtures in the cold recycling technology10.1016/j.proeng.2013.04.056 ↗
14. The effect of cement on performance properties of foam asphalt cold recycled mixture10.4028/www.scientific.net/AMM.178-181.1379 ↗
15. S.F. Brown, D. Needham, A study of cement modified bitumen emulsion mixtures, Association of Asphalt Paving Technologists Proc, 2000.
16. Mixed-Mode cracking behavior of cold recycled mixes with emulsion using Arcan configuration10.1016/j.conbuildmat.2013.12.079 ↗
17. Performance evaluation of Cold In-Place Recycling mixtures using emulsified asphalt based on dynamic modulus, flow number, flow time, and raveling loss10.1007/s12205-012-1376-0 ↗
18. High-temperature performance of multilayer pavement with cold in-place recycling mixtures10.1080/14680629.2014.924427 ↗
19. Characterization of air voids in cold in-place recycling mixtures using X-ray computed tomography10.1016/j.conbuildmat.2015.03.081 ↗
20. Void distribution of emulsified asphalt cold mix with different curing temperature
21. Research on the asphalt dispersion characteristics and asphalt-aggregate interaction
22. A proposed methodology for the global study of the mechanical properties of cold asphalt mixtures10.1016/j.matdes.2013.12.079 ↗
23. Feasibility of deformation strength for estimation of rut resistance of asphalt concrete10.1080/14680629.2004.9689974 ↗
24. Correlation analyses for implementation of binder properties for rut potential estimation of asphalt mixtures
25. Examination of short-term aging temperature for modified WMA mixtures based on high-temperature properties10.1520/JTE20150031 ↗
26. Characterization of air void distribution in asphalt mixes using X-ray computed tomography10.1061/(ASCE)0899-1561(2002)14:2(122) ↗
27. Study on impacts of freeze-thaw cycles on the shear performances of emulsified asphalt cold recycle mixture