Do chlorides qualify as accelerators for the cement of deepwater oil wells at low temperature?
Source abstract
Abstract
Abstract In this paper, the acceleration performances and mechanisms of chlorides (CaCl 2 , LiCl and KCl) on oil well cement at low temperatures were studied. The results indicated that their accelerating ability follows the order of CaCl 2 > LiCl > KCl. CaCl 2 has some unfavorable effects on the performance of cement, such as increasing the adiabatic temperature, causing bad rheology and thixotropy of cement slurry, and thickening the slurry, which may cause a “flash set”. LiCl can significantly enhance the compressive strength development of oil well cement stone at low temperatures like CaCl 2 , but do not have the disadvantages of CaCl 2 . Besides, LiCl can effectively shorten the static gel strength from 48 Pa to 240 Pa and also have much smaller adiabatic temperature. Based on the micro-test analyses, it was found that LiCl can accelerate the hydration rate of oil well cement under low temperatures. The hydration products of cement slurry include the ettringite (AFt), strip-shaped CSH gel (250–350 nm) and strip-shaped CSH gel (50–70 nm). The small spherical CSH gel fills in the pores of strip-shaped CSH gel to form a dense spatial structure. On contrast, the CSH gel forms a network structure in the cement containing CaCl 2 or KCl. CaCl 2 also inhibits the generation of AFt.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Drilling and Well Engineering · Concrete and Cement Materials Research · Hydraulic Fracturing and Reservoir Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Compressive strength development of concrete with different curing time and temperature10.1016/S0008-8846(98)00164-1 ↗
2. Strength development of concretes with ordinary Portland cement, slag or fly ash cured at different temperatures10.1007/BF02483121 ↗
3. N. Gupta, M. Bogaerts, M. Bellabarba, A. Mendiola, A. Salehpour, Overcoming ultradeepwater cementing challenges in the caribbean. In: SPE Latin America and Caribbean Petroleum Engineering Conference, Held in Maracaibo, Venezuela, May 21–23, 2014.10.2118/169245-MS ↗
4. Nelson · 2006
5. Early hydration and setting of oil well cement10.1016/j.cemconres.2010.03.014 ↗
6. Technical calcium nitrate as set accelerator for cement at low temperatures10.1016/0008-8846(95)00172-7 ↗
7. Properties and hydration mechanism of deepwater cementing system
8. Deepwater wells benefit from cold-temperature cements
9. Design and performance evaluation of a unique deepwater cement slurry10.2118/130266-PA ↗
10. Impact of admixtures on the hydration kinetics of Portland cement10.1016/j.cemconres.2011.03.005 ↗
11. Nanosilicas as accelerators in oilwell cementing at low temperatures10.2118/168037-PA ↗
12. Hydration of the silica fume-Portland cement binary system at lower temperature10.1016/j.conbuildmat.2015.05.069 ↗
13. Effect of calcium formate as an accelerator on the physicochemical and mechanical properties of pozzolanic cement pastes10.1016/j.cemconres.2003.11.015 ↗
14. Effect of pozzolans on the hydration process of Portland cement cured at low temperatures10.1016/j.cemconcomp.2013.05.007 ↗
15. Early age strength increase of fly ash blended cement by a ternary hardening accelerating admixture10.1016/j.cemconres.2015.11.004 ↗
16. J. Maberry, G. Garrison, S. Harris, A. Garnier, Process of well cementing in cold environment, US patent 6,955,220 2005.
17. Effect of calcium chloride on the hydration characteristics of ground clay bricks cement pastes
18. Isothermal calorimetry study of the effect of chloride accelerators on the hydration kinetics of oil well cement10.1016/j.conbuildmat.2014.12.077 ↗
19. Comparison of the accelerating effect of various additions on the early hydration of Portland cement10.1016/j.conbuildmat.2016.03.052 ↗
20. Effects of lithium nitrate admixture on early-age cement hydration10.1016/j.cemconres.2007.11.009 ↗
21. Lithium salts as set accelerators for high alumina cement10.1016/0008-8846(93)90042-8 ↗
22. Influence of lithium sulfate addition on the properties of Portland cement paste10.1016/j.conbuildmat.2013.09.058 ↗
23. Effects of lithium hydroxide on alkali silica reaction gels created with opal10.1016/j.conbuildmat.2006.05.022 ↗
24. Examination of the effects of LiOH, LiCl, and LiNO3 on alkali-silica reaction10.1016/j.cemconres.2004.01.011 ↗
25. Effect of some admixtures on the setting time and strength evolution of cement pastes at early ages10.1016/j.conbuildmat.2006.05.043 ↗
26. Penetration of lithium into ASR-affected concrete due to electro-osmosis of lithium carbonate solution10.1016/j.conbuildmat.2012.05.007 ↗
27. Mechanical performance of shotcrete made with a high-strength cement-based mineral accelerator10.1016/j.conbuildmat.2013.08.014 ↗
28. L. Brothers, A. Palmer, Cementing in deepwater offshore wells, US patent 6,835,243 2004.
29. Statistical study of cement additives with and without chloride on performance modification of Portland cement10.1016/S1002-0071(12)60038-0 ↗
30. API 10B-3-2004, Recommended practice on testing of deepwater well cement formulations, America Petroleum Institute.
31. Well-Integrity evaluation for methane-hydrate production in the deepwater Nankai Trough
32. An investigation of interaction of drilling fluids with gas hydrates in drilling hydrate bearing sediments10.1016/j.jngse.2014.07.006 ↗
33. Cement-slurry design to prevent destabilization of hydrates in deepwater environment10.2118/113631-PA ↗
34. New API practices for isolating potential flow zones during drilling and cementing operations
35. M.J. Rogers, R.L. Dillenbeck, R.N. Eid, Transition time of cement slurries, definitions and misconceptions, related to annular fluid migration, in: SPE Annual Technical Conference and Exhibition, Held in Houston, Texas, 2004.10.2523/90829-MS ↗
36. Study on the performance and mechanism of accelerators LSA-1 and LSA-2 for deepwater well cementing at low temperatures10.1016/j.jngse.2016.03.087 ↗
37. Effect of temperature on the pore solution, microstructure and hydration products of Portland cement pastes10.1016/j.cemconres.2006.11.016 ↗