journal article·2017-03

Influence of volumetric property on mechanical properties of vertical vibration compacted asphalt mixture

Yingjun Jiang, Jinshun Xue, Zhejiang Chen

Publisher page

Abstract

Abstract Volumetric properties, such as volume of air voids (VV), voids filled with asphalt (VFA), and voids in mineral aggregate (VMA), strongly influence the performance of asphalt mixtures. This paper analyzes the influence of volumetric properties on the mechanical properties of the ATB-30 asphalt mixture which molds using vertical vibration compaction method (VVCM). Suggested values of volumetric properties were proposed based on the optimization of mechanical properties. Additionally, the proposed design was evaluated based on its performance in practice. Results show a 92% testing accuracy of the mechanical properties of VVCM specimens. This accuracy reveals that the vibration molding is compatible with the mechanism of the roller. High consistency was observed between the mechanical properties of the ATB-30 asphalt mixture and VV, VFA. However, the correlation between mechanical properties and VMA was poor. Hence, the suggested values of VV and VFA in the ATB-30 asphalt mixture are 2.8%–4.0% and 64%–74%, respectively, and VMA is only used as a reference with a value of at least 10.5%. Compared with the Marshall Compaction method (MCM), the Marshall stability, dynamic stability, splitting strength, and tensile strength of the ATB-30 asphalt mixture increased by 54.4%, 39.1%, 54.8%, and 53.7%, respectively, when using the design-suggested values of the VVCM design. The water stability of the asphalt mixture also improved.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Geotechnical Engineering and Underground Structures · Infrastructure Maintenance and Monitoring

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. W.H. Goetz, The Evaluation of Asphalt Concrete Mix Design, Asphalt Concrete Mix design, 1989, pp. 5–14.10.1520/STP20066S ↗
2. Designing asphalt concrete mixes which are more readily compacted
3. The effect of volumetric properties on mechanical behavior of asphalt mixtures
4. E.R. Brown, S.A. Cross, A study of in-place rutting of asphalt pavement, in: Prepared for Presented at the Annual Meeting of the Association of Asphalt Paving Technologists, NCAT Report 89-02, 1989, p. 26.
5. Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties10.1016/j.conbuildmat.2013.08.045 ↗
6. The significant influence of void ratio on asphalt concrete
7. Use of mechanistic models to investigate fatigue performance of asphalt mixtures10.3141/2507-12 ↗
8. Effects of air void size distribution, pore pressure, and bond energy on moisture damage10.1520/JTE13112 ↗
9. J. Yu, Y. Chen, X. Zhang, Micromechanical analysis on asphalt mixture fatigue damage considering volumetric property, in: The conference of New Frontiers in Road and Airport Engineering, 2015, pp. 233–241.10.1061/9780784414255.022 ↗
10. R.J. Cominsky, R.B. Leahy, E.T. Harrigan, Level one mix design: materials selection, compaction, and conditioning, Report SHRP A-408. Strategic Highway Research Program, National Research Council, Washington, DC, 1994, pp. 87–102.
11. Minimum voids in mineral aggregate in hot-mix asphalt based on gradation and volumetric properties10.1177/0361198196154500110 ↗
12. The dependence of volumetric parameters of hot mix asphalts on testing methods10.1061/(ASCE)MT.1943-5533.0000802 ↗
13. Quantifying laboratory compaction effects on the internal structure of asphalt concrete10.3141/1681-21 ↗
14. Influence of air voids on mechanical properties of asphalt mixtures10.1080/14680629.2011.9695258 ↗
15. Effect of compaction energy on physical and mechanical performance of bitumen emulsion mortar
16. Hunter · 2004 · 125
17. Memon · 2006
18. Evaluation on vertical vibration compaction method of ATB-30 asphalt mixture
19. Digital image analysis of compacted asphalt mixture with different menas
20. An experimental investigation of optimal asphalt-aggregate ratio for different compaction methods10.1016/j.conbuildmat.2015.05.054 ↗
21. An investigation of mechanical behavior of cement-stabilized crushed rock material using different compaction methods10.1016/j.conbuildmat.2013.07.017 ↗
22. Study of compacting properties of asphalt mixture with marshall and vibratory compaction method
23. Ministry of Transport of the People’s Republic of China, Technical Specifications for Construction of Highway Asphalt Pavements (JTJ F40-2004), China Communications Press, Beijing, 2004 (in Chinese).
24. Ministry of Transport of the People’s Republic of China, Standard Test Methods of Bitumen and Bituminous Mixtures for Highway Engineering (JTJ 052-2000), China Communications Press, Beijing, 2000 (in Chinese).
25. Research on test method of asphalt mixture's shearing properties
26. Experimental study on viscoelastic behavior of sedimentary rock under dynamic loading10.1007/s00603-011-0197-7 ↗
27. Experimental investigation and modeling of viscoelastic behavior of concrete10.1016/j.conbuildmat.2013.07.010 ↗
28. Comparison of semi-circular bending and indirect tensile strength tests for HMA mixtures
29. K.M. Cao, Research on semi-circular bending test for asphalt mixtures (Ph.D. thesis), Hunan University, 2007, pp. 29–30 (in Chinese).
30. Q.L. Du, Damage analysis of asphalt pavement and research of gtm mix design methods (Ph.D. thesis), Tongji University, 2006, pp. 117–118 (in Chinese).
31. Effects of air void content on asphalt mixture performance
32. Evaluation and selection of aggregate gradations for asphalt mixtures using super pave10.3141/1583-11 ↗
33. P.S. Kandhal, K.Y. Foo, R.B. Mallick, A critical review of VMA requirements in super pave, NCAT Report 98-01, 1998, pp. 34–47.