journal article·2017-10

Early-age performance of lag screw shear connections for glulam-lightweight concrete composite beams

Yuchen Jiang, Wan Hong, Xiamin Hu, Roberto Crocetti, Lei Wang, Weimin Sun

Publisher page

Abstract

Mechanical behavior of the shear connections has a significant influence on both the load-carrying capacity and the bending stiffness of timber-concrete composite (TCC) beams. All the studies reported so far have concentrated on the performance of TCC connections in mature concrete. The performance of shear connections for TCC beams at early concrete ages, however, has not been investigated yet. This information is essential to evaluate the structural behavior of TCC floors or bridges during construction. In this paper, a total of 18 push-out tests with concrete ages ranging from 12 h to 28 days are performed, to investigate the early-age performance of lag screw shear connections in the lightweight concrete. Development of concrete strength with time is also analyzed. At the concrete ages shorter than 7 days, both the stiffness and strength of the screw connectors increase evidently with time, which follows the same growth trend with the concrete strength. After a 7-day cure, screw shear connections reach almost 100% of both the 28-day serviceability slip modulus and shear strength. Material properties of the glulam and the screw fastener are decisive in the shear performance of connections when the concrete hardens to some degree. Based on the experimental results, the accuracy of the design methods proposed in Eurocode 5 is evaluated. In addition, by non-linear regression of the experiment data, expressions to predict the development of load-carrying capacity and serviceability slip modulus for screw shear connections before 28 days are established.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Wood Treatment and Properties · Structural Engineering and Vibration Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Composite concrete–timber structures10.1002/pse.126 ↗
2. Connectors for timber–lightweight concrete composite structures10.1061/(ASCE)0733-9445(2003)129:11(1538) ↗
3. Connections for composite concrete slab and LVL flooring systems10.1617/s11527-007-9261-x ↗
4. State of the art on timber–concrete composite structures: literature review10.1061/(ASCE)ST.1943-541X.0000353 ↗
5. Stud shear connection design for composite concrete slab and wood beams10.1061/(ASCE)0733-9445(2002)128:12(1544) ↗
6. Nails and nailplates as shear connectors for timber–concrete composite constructions
7. Investigation of notched composite wood–concrete connections10.1061/(ASCE)0733-9445(2004)130:10(1553) ↗
8. Shear and bending performance of a novel wood–concrete composite system10.1061/(ASCE)0733-9445(2005)131:9(1404) ↗
9. Experimental analysis of laterally loaded nailed timber-to-concrete connections10.1016/j.conbuildmat.2007.11.011 ↗
10. Experimental tests of notched and plate connectors for LVL–concrete composite beams10.1061/(ASCE)ST.1943-541X.0000288 ↗
11. Experimental and analytical investigation of short-term behavior of LVL–concrete composite connections and beams10.1016/j.conbuildmat.2012.07.022 ↗
12. Experimental behavior of a full-scale timber–concrete composite floor with mechanical connectors10.1617/s11527-012-9869-3 ↗
13. Screw connectors for thin topping, timber–concrete composites10.1617/s11527-013-0158-6 ↗
14. Load-carrying capacity of timber–concrete joints with dowel-type fasteners10.1061/(ASCE)0733-9445(2007)133:5(720) ↗
15. Stiffness of dowel-type fasteners in timber–concrete joints10.1680/stbu.2010.163.4.257 ↗
16. L. Jorge, H. Cruz, S. Lopes, Shear tests in timber–LWAC with screw-type connections, in: 36th CIB-W18 Meeting. Colorado, USA, 2003.
17. Short-and long-term performance of the “Tecnaria” stud connector for timber–concrete composite beams10.1617/s11527-006-9200-2 ↗
18. EN 1995-1-1: 2004 · 2004
19. EN 383: 2007. Timber Structures – Test Methods – Determination of Embedding Strength and Foundation Values for Dowel Type Fasteners, European Committee for Standardization, 2007.
20. EN 1992-1-1: 2004 · 2004
21. EN 12390-3: 2009. Testing hardened concrete–Part 3: Compressive strength of test specimens, 2010.
22. EN 26891: 2000 · 2000
23. Theory of timber connections
24. Design and testing of a composite timber and concrete floor system
25. A. Dias, H. Cruz, S. Lopes, J.W.G. Van de Kuilen, Experimental shear-friction tests on dowel type fastener timber-concrete joints, in: Proceedings of 8th WCTE Finland, 2004.