journal article·2017-12Open access

Ultrasound transmission method to assess raw earthen materials

Ernest Bernat-Maso, Elitsa Teneva, Christian Escrig, Lluís Gil

Abstract

The feasibility of using ultrasound transmission method to assess raw earthen materials is investigated. Results indicate that this technique is effective at controlling the drying process of raw earthen materials. Near the hygrometric equilibrium, there is a linear relationship between the moisture content of the earthen material and the ultrasound transmission speed, which increases during the drying process. For the tested compressed earth, the hygrometric equilibrium is reached when the ultrasound transmission speed is over 1100 m/s. In addition, ultrasound transmission method is useful to reliably calculate the dynamic Young's modulus of raw earthen materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hygrothermal properties of building materials · Urban Heat Island Mitigation · Acoustic Wave Phenomena Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. Mechanical behaviour of earthen materials: a comparison between earth block masonry, rammed earth and cob10.1016/j.conbuildmat.2014.03.009 ↗
2. Mechanical characterization of the structural components of Pre-Columbian earthen monuments: analysis of bricks and mortar from Huaca de la Luna in Perú
3. Earth building in Spain10.1016/j.conbuildmat.2005.02.006 ↗
4. A guideline for assessing of critical parameters on Earth architecture and Earth buildings as a sustainable architecture in various countries10.1016/j.rser.2013.07.020 ↗
5. Advances on the assessment of soil suitability for rammed earth10.1016/j.conbuildmat.2012.12.049 ↗
6. The selection of soils for unstabilised earth building: a normative review10.1016/j.conbuildmat.2005.08.006 ↗
7. Greening stabilized rammed earth: devising more sustainable dosages based on strength controlling equations10.1016/j.jclepro.2013.11.041 ↗
8. Structural capacity of rammed Earth in compression10.1061/(ASCE)0899-1561(2008)20:3(230) ↗
9. Experimental investigation on the compressive strength of cored and molded cement-stabilized rammed earth samples10.1016/j.conbuildmat.2011.08.070 ↗
10. A model to measure compressive strength of compressed earth blocks with the “3 points bending test”10.1016/S0950-0618(02)00023-5 ↗
11. Comparative compressive strength of stabilized and un-stabilized rammed earth
12. Towards a simple compressive strength test for earth bricks ?
13. Compressive strength characteristics of cement stabilized rammed earth walls10.1016/j.conbuildmat.2006.05.049 ↗
14. Shaking table tests on seismic retrofitting of rammed-earth structures
15. Axial load-capacity of rectangular cement stabilized rammed earth column10.1016/j.engstruct.2015.05.014 ↗
16. Seismic assessment of rammed Earth walls using pushover tests10.1016/j.proeng.2016.04.153 ↗
17. In plane behaviour of rammed earth under cyclic loading: experimental testing and finite element modelling10.1016/j.engstruct.2016.07.010 ↗
18. El comportamiento térmico de los edificios de tierra10.3989/ic.10.024 ↗
19. La transferencia de humedad y el cambio en la resistencia durante la construcció;n de edificios de tierra10.3989/ic.10.023 ↗
20. Effect of moisture content on the mechanical characteristics of rammed earth10.1016/j.conbuildmat.2013.12.067 ↗
21. A unified failure criterion for unstabilized rammed earth materials upon varying relative humidity conditions10.1016/j.conbuildmat.2015.07.100 ↗
22. Impact of relative humidity on the mechanical behavior of compacted earth as a building material10.1016/j.conbuildmat.2016.01.027 ↗
23. A procedure to measure the in-situ hygrothermal behavior of earth walls10.3390/ma7043002 ↗
24. Hardening of clayey soil blocks during freezing and thawing cycles10.1016/j.clay.2012.04.014 ↗
25. Ultrasonic, molecular and mechanical testing diagnostics in natural fibre reinforced, polymer-stabilized earth blocks10.1155/2013/130582 ↗
26. Characterization of compressed earth blocks using low frequency guided acoustic waves10.1121/1.4948573 ↗
27. First exploratory study on dynamic characteristics of rammed earth buildings10.1016/j.engstruct.2011.08.004 ↗
28. First exploratory study on the ageing of rammed earth material10.3390/ma8010001 ↗
29. Investigations on the structural behaviour of archaeological heritage in Peru: from survey to seismic assessment10.1016/j.engstruct.2015.03.058 ↗
30. Textile-reinforced rammed earth: experimental characterisation of flexural strength and thoughness10.1016/j.conbuildmat.2015.12.139 ↗
31. Larrosa · 2015
32. ASTM. Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock. D2548-05. Astm 2005;04.08:1–7.
33. Static behaviour of rammed earth: experimental testing and finite element modelling
34. H. Guillaud, T. Joffroy, P. Odul, Craterre, 1995. Compressed Earth Blocks: Manual of Design and Construction.
35. In situ mechanical investigation of rammed earth: calibration of minor destructive testing10.1016/j.conbuildmat.2013.10.090 ↗
36. Seismic resistance of earth construction in Portugal10.1016/j.engstruct.2010.12.014 ↗