journal article·2018-03

Investigation of Prony series model related asphalt mixture properties under different confining pressures

Linglin Li, Wenlong Li, Hao Wang, Jingnan Zhao, Zhongyuan Wang, Mansheng Dong, Ding Han

Publisher page

Abstract

Abstract The objective of this paper is to investigate linear viscoelastic properties of asphalt mixtures measured under different confining pressures with respect to master curves of complex modulus, relaxation time and modulus of Prony series model. A modified collocation method is utilized to calculate the relaxation modulus of Prony series representation after the relaxation time is selected. The relaxation moduli of two asphalt mixtures under different confining pressures are compared at a wide range of reduced loading times. Finite element simulation is employed to fully investigate the effect of confining pressure on mechanical responses of asphalt pavement. The results show that the construction method of master curves of complex moduli is effective and reliable. The relaxation modulus calculated from the smoothed experimental storage and loss moduli of the same complex moduli are slightly different, and it is impossible to obtain the accurate relaxation time and modulus to well agree with the test data of storage and loss moduli simultaneously at the full range of reduced angular frequencies. As the confining pressure increases, the relaxation modulus does not always increase at the full range of reduced loading time due to the effect of phase angle. As the confining pressure increases, the tensile strains and shear strains in the asphalt layer decrease in the practical speeds of vehicular loading.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. Roberts · 1991
2. Characterization of the three-dimensional linear viscoelastic behavior of asphalt concrete mixtures10.1016/j.conbuildmat.2015.12.094 ↗
3. Characterization of linear viscoelastic, nonlinear viscoelastic and damage stages of asphalt mixtures10.1016/j.conbuildmat.2016.08.039 ↗
4. Weak form equation-based finite-element modeling of viscoelastic asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001395 ↗
5. Accuracy of current complex modulus selection procedure from vehicular load pulse: NCHRP project 1–37a mechanistic-empirical pavement design guide10.3141/2087-09 ↗
6. An approach to couple aging to stiffness and permanent deformation modeling of asphalt mixtures10.1617/s11527-016-0834-4 ↗
7. Dynamic modules of asphalt mixtures evaluation of effects on pavement performance prediction10.3141/2507-08 ↗
8. Creep compliance: a parameter to predict rut performance of asphalt binders and mixtures10.1007/s13369-014-1216-2 ↗
9. Micromechanical shear modulus modeling of activated crumb rubber modified asphalt cements10.1016/j.conbuildmat.2017.05.208 ↗
10. A framework for 3D synthetic mesoscale models of hot mix asphalt for the finite element method10.1016/j.conbuildmat.2017.04.033 ↗
11. Viscoelastic and Poisson's ratio characterization of asphalt materials: critical review and numerical simulations10.1617/s11527-016-0881-x ↗
12. T.K. Pellinen, M.W. Witczak, R.F. Bonaquist, Asphalt mix master curve construction using sigmoidal fitting function with non-linear least squares optimization, in: Proceedings of 15th ASCE Engineering Mechanics Conference, Columbia University, New York, 2002.10.1061/40709(257)6 ↗
13. Predictive models for storage modulus and loss modulus of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001550 ↗
14. Modelling linear viscoelastic properties of asphalt concrete by the Huet-Sayegh model10.1080/10298430802524784 ↗
15. Modelling the rheological properties of bituminous binders using mathematical equations10.1016/j.conbuildmat.2012.09.105 ↗
16. Techniques for determining errors in asphalt binder rheological data10.3141/1766-05 ↗
17. Time-temperature superposition and AASHTO MP1a critical temperature for low-temperature cracking10.1080/10298430410001720792 ↗
18. Investigation on the pavement performance of asphalt mixture based on predicted dynamic modulus10.1016/j.conbuildmat.2015.10.178 ↗
19. H. Bahia, D. Hanson, M. Zeng, H. Zhai, M. Khatri, R. Anderson, Characterization of modified asphalt binders in surperpave mix design, NCHRP 459 report, Transportation Research Board, 2001.
20. Anisotropic viscoelastic properties of undamaged asphalt mixtures10.1061/(ASCE)TE.1943-5436.0000302 ↗
21. Predictive models to estimate phase angle of asphalt mixtures10.1061/(ASCE)MT.1943-5533.0001197 ↗
22. Relation between maximum relaxation time and chain length10.1016/0095-8522(60)90030-1 ↗
23. A multidata method of approximate Laplace transform inversion10.1002/nme.1620020206 ↗
24. Generating line spectra from experimental responses. Part I: Relaxation modulus and creep compliance10.1007/BF00434195 ↗
25. Schapery · 1961
26. Nonlinearly viscoelastic analysis of asphalt mixes subjected to shear loading10.1007/s11043-007-9034-5 ↗
27. New approach to determining the stiffness moduli of asphalt mixtures from IDT testing10.1061/(ASCE)MT.1943-5533.0001749 ↗
28. 3Dim experimental investigation of linear viscoelastic properties of bituminous mixtures10.1617/s11527-016-0827-3 ↗
29. Viscoelastic Poisson's ratio of asphalt mixtures10.1061/(ASCE)GM.1943-5622.0000199 ↗
30. Theoretical and practical differences between creep and relaxation Poisson’s ratios in linear viscoelasticity10.1007/s11043-015-9277-5 ↗
31. Numerical finite element formulation of the 3D linear viscoelastic material model: Complex Poisson's ratio of bituminous mixtures10.1016/j.acme.2015.02.003 ↗
32. Determining temperature and time dependent Poisson’s ratio of asphalt concrete using indirect tension test10.1016/j.fuel.2015.01.028 ↗
33. Development of master curve models complying with linear viscoelastic theory for complex moduli of asphalt mixtures with improved accuracy10.1016/j.conbuildmat.2017.06.143 ↗
34. Virtual testing of asphalt mixture with 2D and 3D random aggregate microstructures10.1080/10298436.2015.1066005 ↗
35. ARA, Inc., ERES Consultants Division. Guide for Mechanistic–Empirical Design of New and Rehabilitated Pavement Structures. Final report, NCHRP Project 1-37A. Transportation Research Board of the National Academies, Washington, D.C., 2004.
36. H. Wang, I.L. Al-Qadi, Near-surface pavement failure under multiaxial stress state in thick asphalt pavement, Transportation Research Record, No. 2154, TRB, 2010, pp. 91–99.10.3141/2154-08 ↗
37. Reduced testing protocol for measuring the confined dynamic modulus of asphalt mixtures10.3141/2210-03 ↗
38. Significance of confined dynamic modulus laboratory testing for asphalt concrete conventional, gap-graded, and open-graded mixtures10.3141/2210-02 ↗
39. New predictive equations for dynamic modulus and phase angle using a nonlinear least-squares regression model10.1061/(ASCE)MT.1943-5533.0001070 ↗
40. Methods of interconversion between linear viscoelastic material functions. Part I-A numerical method based on Prony series10.1016/S0020-7683(98)00055-9 ↗
41. N.W. Tschoegl, The Phenomenological Theory of Linear Viscoelastic Behavior: An Introduction, Springer-verlag, 1989.10.1007/978-3-642-73602-5 ↗
42. Computational constitutive model for predicting nonlinear viscoelastic damage and fracture failure of asphalt concrete mixtures10.1061/(ASCE)1532-3641(2007)7:2(102) ↗
43. Schapery · 1961
44. Combined effect of moving wheel loading and three-dimensional contact stresses on perpetual pavement responses10.3141/2095-06 ↗
45. Prediction of tire-pavement contact stresses and analysis of asphalt pavement responses: a decoupled approach
46. Poisson's ratio in linear viscoelasticity-a critical review10.1023/A:1014411503170 ↗
47. C.G. Wang, Weichen; Wang, Ruwshan, Determination and influencing factor of dynamic modulus and Poisson's ratio of asphalt concrete, Build. Energy Efficiency (1) (1989) pp. 9–16 (5007-5019).