journal article·2018-05

Short-term performance appraisal of half-warm mix asphalt mixtures containing high (70%) and total RAP contents (100%): From laboratory mix design to its full-scale implementation

José Manuel Lizárraga, Antonio Ramírez, Patricia Díaz, José R. Marcobal, Juan Gallego

Publisher page

Abstract

Abstract Asphalt mixtures requiring lower mixing, spreading and compacting temperatures have received considerable worldwide attention in the recent years as a way to reduce energy consumption and pollutant emissions. However, many questions are still unanswered regarding the field performance of those mixtures under loading and environmental conditions. In this study, half-warm mix reclaimed asphalt (HWMRA) mixtures containing high (70%) and total reclaimed asphalt pavement (RAP) contents (100%) for use in wearing and binder courses of urban areas were evaluated both in laboratory and in field. HWMRA mixtures with 70 and 100% RAP content were designed in laboratory from a preliminary field investigation aimed at characterizing the existing materials in an urban pavement. Posteriorly, the mixtures were manufactured in a prototype asphalt plant at a mixing temperature below 100 °C and with bitumen emulsion. Furthermore, an urban test section was built to compare its mechanical performance with that of a contiguous section comprising conventional hot mix asphalt (HMA) mixture. In addition, core samples were extracted from the evaluated sections after construction and one year later, and tested in laboratory to determine thicknesses, density, stiffness modulus, indirect tensile strength (ITS) and fatigue resistance at 20 °C. Surface friction characteristics (i.e., skid resistance and macrotexture) were also assessed and compared with those of the HMA pavement section. The results of the laboratory tests conducted on core samples showed that the performance of the HWMRA mixtures can be compared to that of HMA mixtures in terms of fatigue resistance and resistance to permanent deformations. These findings encourage greater confidence in promoting the use of these types of sustainable asphalt mixes.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Asphalt Pavement Performance Evaluation · Infrastructure Maintenance and Monitoring · Smart Materials for Construction

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (63)

Show source-provided references
1. A. Bardesi, J.A. Soto, Mezclas bituminosas a baja temperatura: mezclas en frío, templada y semicalientes. Estado actual y futuro de las mezclas., 2010.
2. J. Croteau, B. Tessier, Warm mix asphalt paving technologies: a road builder’s perspective. Polyscience Publications. Inc., Laval, Quebec, Canada., in: Annu. Conf. Transp. Assoc. Canada., 2008: p. 12.
3. J. Davidson, J. Pedlow, Paving the Way to Environmentally friendly pavements through innovative solutions., in: Can. Tech. Asph. Assoc., 2006: pp. 97–121.
4. P.S. Kandhal, R.B. Mallick, Pavement Recycling Guidelines for State and Local Governments Participant’s Reference Book, 1997.
5. Comparison of mechanistic characteristics of cold, mild warm and half warm mixes for bituminous road construction
6. A study on the mechanical behaviour of cement–bitumen treated materials10.1016/j.conbuildmat.2010.07.007 ↗
7. Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures10.1016/j.matdes.2016.01.094 ↗
8. Performance of half warm rolled asphalt mixtures10.1016/j.conbuildmat.2017.11.173 ↗
9. Are totally recycled hot mix asphalts a sustainable alternative for road paving?10.1016/j.resconrec.2011.11.013 ↗
10. Towards 100% recycling of reclaimed asphalt in road surface courses: binder design methodology and case studies10.1016/j.jclepro.2016.05.093 ↗
11. Laboratory evaluation of workability and moisture susceptibility of warm-mix asphalt mixtures containing recycled asphalt pavements10.1061/(ASCE)MT.1943-5533.0001825 ↗
12. Comparative evaluation of warm mix asphalt containing high percentages of reclaimed asphalt pavement10.1016/j.conbuildmat.2013.03.010 ↗
13. Durability of hot and warm asphalt mixtures containing high rates of reclaimed asphalt at laboratory scale
14. Experimental study of recycled asphalt mixtures with high percentages of reclaimed asphalt pavement (RAP)10.1016/j.conbuildmat.2010.09.016 ↗
15. R. West, J. Willis, M. Marasteanu, Improved Mix Design, Evaluation, and Materials Management Practices for Hot Mix Asphalt with High Reclaimed Asphalt Pavement Content. NCHRP Report 752., 2013. doi: https://doi.org/10.17226/22554.10.17226/22554 ↗
16. Laboratory study on effects of high reclaimed asphalt pavement and binder content10.3141/2445-08 ↗
17. Going green: innovations in recycling asphalt
18. Investigation of properties of plant-produced reclaimed asphalt pavement mixtures
19. Laboratory evaluation of rutting susceptibility of polymer-modified asphalt mixtures containing recycled pavements10.1016/j.conbuildmat.2011.12.094 ↗
20. Characterization of half-warm–mix asphalt with high rates of reclaimed asphalt pavement10.3141/2575-18 ↗
21. JM. Lizárraga, A. Ramírez, P. Díaz, M. Martín, F. Guisado, Long-term monitoring of half warm mix recycled asphalt containing up to 100% RAP, in: The Netherlands CRC Press/Balkema 2017 (Ed.), Aiit Int. Congr. Transp. Infrastruct. Syst. (Tis 2017), Rome, Italy, Taylor & Francis Group, 2017: pp. 253–260. doi:10.1201/9781315281896-35.10.1201/9781315281896-34 ↗
22. Mechanical performance assessment of half-warm recycled asphalt mixes containing up to 100%RAP
23. Effects of reclaimed asphalt pavement content and virgin binder grade on properties of plant produced mixtures10.1080/14680629.2012.657066 ↗
24. Behaviour of recycled asphalt pavements at low temperatures10.1139/l91-053 ↗
25. Laboratory evaluation of fatigue characteristics of recycled asphalt mixture10.1016/j.conbuildmat.2007.04.019 ↗
26. Laboratory Investigation of Mixing Hot-Mix Asphalt with Reclaimed Asphalt Pavement10.1177/0361198105192900105 ↗
27. Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art
28. Can I Run More RAP?. HMAT: Hot Mix Asphalt Technology
29. Feasibility of using high RAP contents in hot mix asphalt
30. J.L. García, F. Lucas, Mezclas templadas con reutilizacion del RAP con tasa alta y tasa total. Aplicación, experiencias reales y resultados. Asefma. IV (2014) 51–65.
31. Performance of Warm Mix Recycled Asphalt containing up to 100% RAP10.1016/j.conbuildmat.2016.02.108 ↗
32. 100% recycled hot mix asphalt: a review and analysis10.1016/j.resconrec.2014.07.007 ↗
33. Modified cold in-place asphalt recycling10.1177/0361198196154500119 ↗
34. The properties of asphalt binder blended with variable quantities of recycled asphalt using short term and long term aging simulations10.1016/j.conbuildmat.2011.06.057 ↗
35. Mix design considerations for warm mix recycled asphalt with bitumen emulsion10.1016/j.conbuildmat.2011.10.053 ↗
36. CEN. European Committee for Standardization. UNE-EN 12697-1. Bituminous mixtures. Test methods for hot mix asphalt. Part 1: Soluble binder content, (2013) 50.
37. DGC. Dirección General de Carreteras. NLT-176/92: Densidad aparente del polvo mineral en touleno. Ensayos de carreteras. Ministerios de Obras Públicas y Transportes (MOPT). Madrid., (1992).
38. CEN. European Committee for Standardization. UNE-EN 13808. Bitumen and bituminous binders. Framework for specifying cationic bituminous emulsions., 2013.
39. CEN. European Committee for Standardization. UNE EN 12697-31.Test methods for hot mix asphalt. Part 31: Specimen preparation by gyratory compactor., 2008.
40. CEN. European Committee for Standardization. Bituminous mixtures. Test methods for hot mix asphalt. UNE-EN 12697-30. Part 30: Specimen preparation by impact compactor., 2013.
41. CEN. European Committee for Standardization. Bituminous mixtures.UNE-EN 12697-22.Test methods for hot mix asphalt. Part 22: Wheel tracking., 2008.
42. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-33. Test methods for hot mix asphalt. Part 33: Specimen prepared by roller compactor., 2007.
43. DGC. Dirección General de Carreteras: Pliego de prescripciones técnicas generales para obras de carreteras y puentes – Art. 543- PG-3. Ministerio de Fomento., 2015.
44. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-34. Test methods for hot mix asphalt. Part 34: Marshall test., (2013) 16.
45. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-12. Test method for hot mix asphalt. Part 12: Determination of the water sensitivity of bituminous specimens., 2008.
46. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-26. Test method for hot mix asphalt. Part 26: Stiffness, 2006.
47. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-23. Test method for hot mix asphalt. Part 23: Determination of the indirect tensile strength of bituminous specimens., 2003.
48. W. Mogawer, T. Bennert, J.S. Daniel, R. Bonaquist, A. Austerman, A. Booshehrian, Performance characteristics of plant produced high RAP mixtures., in: 87th Assoc. Asph. Paving Technol. Annu. Meet. April 1–4., 2012: pp. 183–208. doi: http://dx.doi.org/10.1080/14680629.2012.657070.10.1080/14680629.2012.657070 ↗
49. Material-related aspects of asphalt recycling — State-of-the-Art10.1061/(ASCE)0899-1561(2006)18:1(81) ↗
50. Laboratory evaluation of mixes containing recycled asphalt pavement (RAP)10.1080/14680629.2009.9690211 ↗
51. Rutting resistance of asphalt concrete mixtures that contain recycled asphalt pavement10.3141/2208-02 ↗
52. R. West, D. Timm, R. Willis, B. Powell, N. Tran, D. Watson, M. Sakhaeifar, M. Robbins, R. Brown, A. Vargas-Nordcbeck, F. Villacorta, X. Guo, J. Nelson, Phase IV NCAT pavement test track findings: Draft report. Auburn, AL: National Center for Asphalt Technology. Report number NCAT 12-10, 2012.
53. Rutting and moisture damage resistance of high RAP warm mixed asphalt: loaded wheel tracking vs. conventional methods
54. High-performance thin-lift overlays with high reclaimed asphalt pavement content and warm-mix asphalt technology, performance and workability characteristics
55. A laboratory and filed evaluation of Cold Recycled Mixture for base layer entirely made with Reclaimed Asphalt Pavement10.1016/j.conbuildmat.2017.02.004 ↗
56. The effect of curing on the mechanical behavior of cement-bitumen treated materials
57. CEN. European Committee for Standardization. Bituminous mixtures. UNE-EN 12697-24. Test methods for hot mix asphalt. Part 24: Resistance to fatigue., 2013.
58. CEN. European Committee for Standardization. Road and airfield surface characteristics. UNE-EN 13036-1. Test methods. Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique., 2010.
59. Pavement Surface Performances Evolution: an Experimental Application10.1016/j.sbspro.2012.09.964 ↗
60. CEN. European Committee for Standardization. Road and airfield surface characteristics. UNE 41201-IN. Procedure for determining the skid resistance of a pavement surface by measurement of the sideway force coefficient (SFCS): SCRIM(r). Madrid, (2010).
61. Predicting asphalt mixture skid resistance based on aggregate characteristics
62. M.T. Do, Z. Tang, M. Kane, F. De Larrard, Experimental simulation and modeling of pavement surface polishing by road traffic. Bulletin de liaison des laboratories des ponts et chaussées n. 267., 2007.
63. Woodward D. The Effect of Aggregate Type and Size on the Performance of Thin Surfacing Materials. International Conference Managing Road and Runway Surfaces to improve safety, England., 2008.