journal article·2018-03Open access

An experimental investigation of a new perfect bond technology for composite slabs

Miquel Ferrer, Frederic Marimon, Miquel Casafont

Abstract

Steel-concrete composite slabs generally fail due to the debonding with separation of sections caused by longitudinal shear forces, regardless of the shape of the sheeting profile or the design of the embossments. This article presents an innovative full-connection bonding technology, consisting of producing bands of many small crown-shaped cuttings in the profile webs as a replacement for the embossments. The new technology has been tested on three commercial sheeting profiles. The results of the investigation show that full connection is achieved with the new system, i.e., yielding of both materials occurs without any slip, in contrast to the partial connection of traditional embossments. The longitudinal shear strengths are 1.4–7 times higher. The specimens tested include the use of conventional galvanized steel and concrete, as well as ferritic stainless steel and lightweight aggregate concrete.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Load-Bearing Analysis · Structural Behavior of Reinforced Concrete · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. Innovation in Composite Slabs Incorporating Profiled Steel Sheeting
2. M.L. Porter, C.E. Ekberg, Investigation of Cold-formed Steel-deck-reinforced Concrete Floor Slabs, in: Proceeding of the 1th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, 1971. http://scholarsmine.mst.edu/isccss/1iccfss/1iccfss-session6/2.
3. R.P. Johnson, D. Anderson, Designers’ guide to EN-1994-1-1 Eurocode 4: design of composite steel and concrete structures. Part 1.1: General rules and rules for buildings, Thomas Telford. London, 2004.
4. M. Leskelä, et al., Shear Connections in Composite Flexural Members of Steel and Concrete, 1st Edition. European Convention for Constructional Steelwork. ECCS Publication no138, Brussels, 2017.
5. American Society of Civil Engineers (ASCE) Standard for the Structural Design of Composite Slabs, ANSI/ASCE 3-91, New York, 1992.
6. CEN (European Committee for Standardization) Eurocode 4: Design of composite steel and concrete structures - Part 1-1: General rules and rules for buildings EN 1994-1-1:2004 and AC: 2009, Brussels, 2004 and 2009.
7. Avis Techniques Cahier des prescriptions techniques communes aux procédés des planchers collaborants, Centre Scientifique et Technique du Bâtiment. Cahiers du CSTB, Marné la Vallée, France, 2014.
8. New modelling and evaluation procedures for horizontal shear bond in composite slabs10.1016/j.jcsr.2008.10.009 ↗
9. R. Abdullah, A.B. Hong Kueh, I.S. Ibrahim, W. Easterling, Characterization of shear bond stress for design of composite slabs using an improved partial shear connection method, J. Civ. Eng. Manage., 21:6, 720-732. https://doi.org/10.3846/13923730.2014.893919.10.3846/13923730.2014.893919 ↗
10. M. Ferrer, F. Marimon, I. Arrayago, E. Real, E. Mirambell, Structural and thermal performance of steel-concrete composite floor systems: Composite slabs test, http://www.steel-stainless.org/media/1196/safss-03-03.pdf. Task 3.3 of the European Research project Structural Application of Ferritic Stainless Steels (SAFSS) funded by European Community’s Research Fund for Coal and Steel (RFCS).
11. High performance composite slabs with profiled steel deck and engineered cementitious composite – strength and shear bond characteristics10.1016/j.conbuildmat.2016.08.021 ↗
12. Influence of the sheet profile design on the composite action of slabs made of lightweight woodchip concrete10.1016/j.conbuildmat.2017.04.193 ↗
13. M.L. Porter, C.E. Ekberg, Coating Effects of Cold-Formed Steel Deck Slabs, in: Proceeding of the 5th International Specialty Conference on Cold-Formed Steel Structures. University of Missouri-Rolla, 1980. http://scholarsmine.mst.edu/isccss/5iccfss/5iccfss-session7/1.
14. M. Crisinel, M. Ferrer, F. Marimon, M. Rossich, Influence of sheet surface conditions and concrete strength on the longitudinal shear resistance of composite slabs, A Forecast of the Future of Steel and Composite Steel-Concrete Structures- Prof. Jean-Marie Aribert Retirement Symposium, pag. 233–244, Rennes-France, 2006. https://infoscience.epfl.ch/record/116041?ln=en.
15. Designing cold-formed steel sheets for composite slabs: an experimentally validated FEM approach to slip failure mechanics10.1016/j.tws.2007.01.010 ↗
16. Test arrangement of small-scale shear tests of composite slabs10.1016/j.proeng.2016.08.749 ↗
17. Experimental study on shear bond behaviour of composite slabs according to eurocode 410.1016/j.jcsr.2012.12.009 ↗
18. Longitudinal shear stress and bond-slip relationships in composite concrete slabs10.1016/j.engstruct.2014.03.008 ↗
19. M. Veljkovic, Behaviour and resistance of composite slabs, PhD dissertation, Lulea University of Technology, Lulea, Sweden, 1996. https://www.diva-portal.org/smash/get/diva2:991211/FULLTEXT01.pdf.
20. Numerical modelling of the shear-bond behaviour of composite slabs in four and six-point bending tests10.1016/j.engstruct.2016.12.025 ↗
21. Experimental studies on composite deck slabs to determine the shear-bond characteristic (m–k) values of the embossed profiled sheet10.1016/j.jcsr.2006.07.009 ↗
22. Shear bond mechanism of composite slabs — a universal FE approach10.1016/j.jcsr.2011.03.021 ↗
23. M. Ferrer, F. Marimon, Sistema para la conexión entre chapa de acero y hormigón / System for connecting together steel sheet and concrete., Patent ES2344389, EP2305911, WO2010037876. Applicant: Universitat Politècnica de Catalunya.