journal article·2018-10Open access

Comparison of the effect of mix proportion parameters on behaviour of geopolymer and Portland cement mortars

Jacek Kwasny, Marios N. Soutsos, John A. McIntosh, David J. Cleland

Abstract

Abstract This work focuses on low-purity kaolin, widely accessible throughout the globe. Room temperature cured geopolymer mortars (GPMs) were formulated using an aluminosilicate precursor based on calcined lithomarge and potassium silicate activator. The effect of mix proportion parameters on the engineering properties of GPMs was investigated. The behaviour of GPMs was compared with that of Portland cement-based mortars (PCMs). Statistically designed experiments revealed that an increase in water-to-solid (w/s) ratio had a dominant effect on increasing the workability and setting time while decreasing the compressive strength of GPMs. In contrast to PCMs, GPMs proportioned with a constant water content showed a non-linear relationship between the w/s ratio and workability, which could be associated with changes to paste/sand proportions and/or water/alkali proportions. Like-for-like comparison of GPMs and PCMs showed that GPMs require lower free water content, and can offer shorter setting times and a rapid strength development.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Recycling and utilization of industrial and municipal waste in materials production

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. Geopolymers and related alkali-activated materials10.1146/annurev-matsci-070813-113515 ↗
2. RILEM TC 224-AAM, in: J.L. Provis, J.S.J. van Deventer (Eds.), Alkali-Activated Materials: State-of-the-Art Report, RILEM State-of-the-Art Reports vol. 13, 2014, Springer/RILEM, Dordrecht, 396 pp.
3. The role of inorganic polymer technology in the development of ‘green concrete’10.1016/j.cemconres.2007.08.018 ↗
4. Influence of the starting kaolin on alkali-activated materials based on metakaolin. Study of the reaction parameters by isothermal conduction calorimetry10.1023/A:1026790924882 ↗
5. Quantitative kinetic and structural analysis of geopolymers. Part 1. The activation of metakaolin with sodium hydroxide10.1016/j.tca.2012.03.021 ↗
6. The geopolymerisation of alumino-silicate minerals10.1016/S0301-7516(99)00074-5 ↗
7. Geopolymerisation of multiple minerals10.1016/S0892-6875(02)00255-8 ↗
8. The suitability of thermally activated illite/smectite clay as raw material for geopolymer binders10.1016/j.clay.2009.08.026 ↗
9. Microstructural characterisation of geopolymers synthesised from kaolinite/stilbite mixtures using XRD, MAS-NMR, SEM/EDX, TEM/EDX, and HREM10.1016/S0008-8846(02)00859-1 ↗
10. Alkali activation of Australian slag cements10.1016/S0008-8846(98)00170-7 ↗
11. Alkali-activated slag cements produced with a blended sodium carbonate/sodium silicate activator10.1680/jadcr.15.00013 ↗
12. Factors influencing the compressive strength of fly ash based geopolymers10.1016/j.conbuildmat.2015.11.045 ↗
13. Utilization of volcanic ashes for the production of geopolymers cured at ambient temperature10.1016/j.cemconcomp.2013.03.010 ↗
14. Alkali activation of biomass fly ash–metakaolin blends10.1016/j.fuel.2012.04.006 ↗
15. Geopolymer mortars based on a low grade metakaolin: effects of the chemical composition, temperature and aggregate:binder ratio10.1016/j.conbuildmat.2013.10.023 ↗
16. Influence of metakaolin purities on potassium geopolymer formulation: the existence of several networks10.1016/j.jcis.2013.07.024 ↗
17. Valorisation of a kaolin mining waste for the production of geopolymers10.1016/j.jclepro.2015.12.011 ↗
18. J.A. McIntosh, J. Kwasny, M.N. Soutsos, Evaluation of Northern Irish Laterites as precursor materials for geopolymer binders, in: 34th Cement and Concrete Science Conference, Sheffield, UK, 14–17 Sep 2014, 6 p.
19. A. Mcintosh, S.E.M. Lawther, J. Kwasny, M.N. Soutsos, D. Cleland, S. Nanukuttan, Selection and characterisation of geological materials for use as geopolymer precursors, Adv. Appl. Ceram. http://doi.org/10.1179/1743676115Y.0000000055.10.1179/1743676115Y.0000000055 ↗
20. J. Kwasny, M.N. Soutsos, J.A. McIntosh, D.J. Cleland, banahCEM – comparison of properties of a laterite-based geopolymer with conventional concrete, in: M.R. Jones, M.D. Newlands, J.E. Halliday, L.J. Csetenyi, L. Zheng, M.J. McCarthy, T.D. Dyer (Eds.), 9th International Concrete Conference 2016. Environment, Efficiency and Economic Challenges for Concrete, University of Dundee, Scotland, UK, 4–6 Jul 2016, pp. 383–394.
21. Sulfate and acid resistance of lithomarge-based geopolymer mortars10.1016/j.conbuildmat.2018.01.129 ↗
22. Note on the Interbasaltic Horizon in Northern Ireland10.1144/GSL.JGS.1950.106.01-04.10 ↗
23. M.R. Cooper, Paleogene extrusive igneous rocks, in: W.I. Mitchell (Ed.), The Geology of Northern Ireland, Belfast, N. Ireland, GSNI, 2004, pp. 167–178.
24. Neville · 1996 · 844
25. Design and Analysis of Experiments
26. J.M. Blackstock, J. Neill, J.A. McIntosh, Geopolymeric concrete and methods of forming it from a basaltic precursor, European Patent, EP 2 451 758 B1, 2017.
27. British Standards Institution · 2006
28. British Standards Institution · 2011
29. British Standards Institution · 1995
30. British Standards Institution · 1985
31. Aitcin · 1998 · 624
32. British Standards Institution · 1999
33. British Standards Institution · 2009
34. British Standards Institution · 2002
35. Testing of binders for high performance concrete10.1016/S0008-8846(97)00107-5 ↗
36. ASTM International · 2009
37. British Standards Institution · 2009
38. Design-Expert 7.1 software for design of experiments. Stat-Ease Inc., Statistics Made Easy, USA, 2005.
39. S.S. Shapiro, M.B. Wilk, An Analysis of Variance Test for Normality (complete samples), Biometrika, vol. 52, No. 3 and 4, 1965, pp. 591–611.10.1093/biomet/52.3-4.591 ↗
40. An analysis of transformations10.1111/j.2517-6161.1964.tb00553.x ↗
41. Mortar design based on water film thickness10.1016/j.conbuildmat.2010.11.038 ↗
42. Influence of rheology on the quality of surface finish of cement-based mortars10.1016/j.conbuildmat.2015.03.111 ↗
43. de Larrard · 1999 · 421
44. Geopolymer technology: the current state of the art10.1007/s10853-006-0637-z ↗
45. Role of water in the synthesis of calcined kaolin-based geopolymer10.1016/j.clay.2008.09.003 ↗
46. Geopolymerization process of alkali–metakaolinite characterized by isothermal calorimetry10.1016/j.tca.2009.04.002 ↗
47. Low-temperature synthesized aluminosilicate glasses: Part II Rheological transformations during low-temperature cure and high-temperature properties of a model compound10.1007/BF00355129 ↗
48. Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends10.1007/s10853-009-3790-3 ↗
49. Formulation and characterization of blended alkali-activated materials based on flash-calcined metakaolin, fly ash and GGBS10.1016/j.conbuildmat.2017.03.160 ↗
50. Formulation and performance of flash metakaolin geopolymer concretes10.1016/j.conbuildmat.2016.05.061 ↗
51. Relationships between composition, structure and strength of inorganic polymers: Part I Metakaolin-derived inorganic polymers10.1007/s10853-005-1226-2 ↗
52. D.C. Teychenne, R.E. Franklin, H.C. Erntroy, Design of Normal Concrete Mixes, BRE Report 331, second ed., BREPress, 1997.