journal article·2018-06

Monitoring the structural capacity of airfield pavement with built-in sensors and modulus back-calculation algorithm

Xianyong Ma, Zejiao Dong, Xiong Yu, Fengchen Chen, Cheng Cao, Jianjun Sun

Publisher page

Abstract

Abstract The degree of deterioration in the structural capacity of a pavement is an important indicator of its performance. Conventional falling weight deflectometer, which assesses pavement capacity based on the deflection bowl data under impact loads and is the prevalent method in practice, only characterize the overall bearing capacity of pavement. It does not possess sufficient accuracy in measuring the modulus of pavement structural layer. In this paper, a smart pavement schema was proposed where built-in sensors are incorporated to monitor pavement stress and strain responses under aircraft loads. Theoretical relationship between pavement mechanical responses of a two-layered elastic system subjected to service load is established, which is used for back calculating the modulus of asphalt layer. To demonstrate the concept, sensors are deployed along a taxiway in Beijing Capital International Airport, Beijing, China. The measured mechanical responses by the sensors were incorporated to back-calculate the modulus of asphalt layer, which are then verified through dynamic modulus experiments. The results show that back-calculated modulus by incorporating sensor data is repeatable and can be applied for real-time evaluation of pavement performance without affecting the traffic. Extension of the model and analysis to multi-layered elastic system are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Infrastructure Maintenance and Monitoring · Asphalt Pavement Performance Evaluation · Transport Systems and Technology

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. National Cooperative Highway Research Program (NCHRP), ARA. Guide for mechanistic-empirical design of new and rehabilitated pavement structures. NCHRP 1-37A, National Cooperative Highway Research Program, Washington, DC, 2004.
2. Evaluation of FWD data for determination of layer moduli of pavements10.1061/(ASCE)0899-1561(2003)15:1(25) ↗
3. Investigation of a pavement structural behaviour during spring thaw using falling weight deflectometer10.1080/14680629.2012.754600 ↗
4. Estimation of in situ dynamic modulus by using MEPDG dynamic modulus and FWD data at different temperatures10.1080/10298436.2012.664274 ↗
5. Spectral element technique for efficient parameter identification of layered media. I. Forward calculation10.1016/S0020-7683(00)00112-8 ↗
6. Spectral element technique for efficient parameter identification of layered media. II. Inverse calculation10.1016/S0020-7683(01)00109-3 ↗
7. Spectral element technique for efficient parameter identification of layered media. III. Viscoelastic aspects10.1016/S0020-7683(02)00079-3 ↗
8. Dynamic response of pavement under FWD using spectral element method10.1007/s12205-014-0298-4 ↗
9. Viscowave – a new solution for viscoelastic wave propagation of layered structures subjected to an impact load10.1080/10298436.2013.782401 ↗
10. Artificial neural networks-based backcalculation of the structural properties of a typical flexible pavement10.1007/s00521-012-1131-y ↗
11. Backcalculation of airport pavement moduli and thickness using the Levy ant colony optimization algorithm10.1016/j.conbuildmat.2016.05.072 ↗
12. Comparative study of static and dynamic falling weight deflectometer back-calculation using probabilistic approach10.1061/(ASCE)0733-947X(2010)136:3(196) ↗
13. Fuzzy logic modeling of deflection behavior against dynamic loading in flexible pavements10.1016/j.conbuildmat.2006.07.004 ↗
14. Dynamic backcalculation of asphalt pavement layer properties using spectral element method10.1080/14680629.2015.1056214 ↗
15. 2015 Inverse calculation of elastic moduli in cross-anisotropic and layered pavements by system identification method10.1080/17415977.2014.933833 ↗
16. Backcalculation of viscoelastic and nonlinear flexible pavement layer properties from falling weight deflections10.1080/10298436.2014.993196 ↗
17. Finite element modeling and parametric analysis of viscoelastic and nonlinear pavement responses under dynamic FWD loading10.1016/j.conbuildmat.2017.02.096 ↗
18. Backcalculation of pavement layer elastic modulus and thickness with measurement errors10.1080/10298436.2013.786078 ↗
19. Multi-level backcalculation algorithm for robust determination of pavement layers parameters10.1080/17415977.2016.1191073 ↗
20. Comparative study of asphalt pavement responses under FWD and moving vehicular loading10.1061/(ASCE)TE.1943-5436.0000902 ↗
21. H.B. Baker, M.R. Buth, D.A. Van Deusen, Load response instrumentation installation and testing procedures. MN/PR-94/01, Minnesota Department of Transportation, St. Paul, MN, 1994.
22. Data collection and management of instrumented smart road flexible pavement sections10.3141/1769-17 ↗
23. The Virginia smart road: The impact of pavement instrumentation on understanding pavement performance
24. E.R. Brown, L.A. Cooley, D. Hanson, NCAT test track design, construction, and performance. NCAT Report 02-12, 2002.
25. D.H. Timm, A.L. Priest, T.V. McEwen, Design and instrumentation of the structural pavement experiment at the NCAT test track. NCAT Report 04-01, 2004.
26. A prototype integrated monitoring system for pavement and traffic based on an embedded sensing network10.1109/TITS.2014.2364253 ↗
27. Monitoring the speed, configurations, and weight of vehicles using an in-situ wireless sensing network10.1109/TITS.2014.2364186 ↗
28. Road roughness evaluation using in-pavement strain sensors10.1088/0964-1726/24/11/115029 ↗
29. Analytical solutions of asphalt pavement responses under moving loads with arbitrary non-uniform tire contact pressure and irregular tire imprint