Post-fire mechanical and corrosion properties of duplex stainless steel: Comparison with ordinary reinforcing-bar steel
Source abstract
Abstract
Abstract This paper is a preliminary study on the merits of using duplex stainless steel (DSS) as concrete reinforcements. It looks into the post-fire mechanical and corrosion properties of the wrought DSS 2205 after annealing at 500 °C, and compare them with those of an ordinary rebar steel. Spinodal decomposition of the ferrite phase strengthens and embrittles the 2205 DSS. For the rebar steel, however, softening occurs. Even after the 2205 DSS is exposed to 500 °C for 1 week, its ductility as indicated by fracture strain is still comparable to that of the unannealed rebar steel. The present data show that after short-term exposure to temperatures under 500 °C, the ductility and retention of strength of the 2205 DSS are better than those of the the rebar steel. The corrosion performance of the 2205 DSS, both in 3.5% NaCl and in 3.5% NaCl + Ca(OH)2, is also better than that of the unannealed rebar steel even if the former is exposed to 500 °C for 1 week.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete Corrosion and Durability · Hydrogen embrittlement and corrosion behaviors in metals · Fire effects on concrete materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. Broomfield · 1997
2. Cover cracking as a function of rebar corrosion: part 2 – numerical model10.1007/BF02472864 ↗
3. Influence of corrosion on the bond strength of steel rebars in concrete10.1617/s11527-014-0518-x ↗
4. Consequences of steel corrosion on the ductility properties of reinforcement bars10.1016/j.conbuildmat.2007.10.006 ↗
5. S.R. Kilworth, J. Fallon, Stainless steels for reinforcement, Concrete durability in the Arabian Gulf, The 2nd regional concrete conference. Bahrain: 19–21 March 1995.
6. Service life estimation of reinforced concrete structures made using Cr-bearing rebars in microcell corrosion environments10.2355/isijinternational.47.1315 ↗
7. Stainless steel in construction: a review of research, applications, challenges and opportunities10.1016/j.jcsr.2008.07.011 ↗
8. Fire testing and design of stainless steel structures10.1016/j.jcsr.2005.09.009 ↗
9. Elevated temperature material properties of stainless steel reinforcing bar10.1016/j.conbuildmat.2016.04.009 ↗
10. Elevated temperature mechanical properties of solid section structural steel10.1016/j.conbuildmat.2017.05.124 ↗
11. Mechanical properties of cyclically-damaged structural mild steel at elevated temperatures10.1016/j.conbuildmat.2013.11.042 ↗
12. Modeling elevated-temperature mechanical behavior of high and ultra-high strength steels in structural fire design10.1016/j.matdes.2017.09.041 ↗
13. Experimental investigation of post-fire mechanical properties of cold-formed steels10.1016/j.tws.2014.06.010 ↗
14. Mechanical properties of prestressing steel after fire exposure10.1617/s11527-014-0377-5 ↗
15. Experimental investigation of the residual mechanical properties of cast steels after exposure to elevated temperature10.1016/j.conbuildmat.2017.03.118 ↗
16. Post-fire mechanical properties of high strength Q690 structural steel10.1016/j.jcsr.2016.12.027 ↗
17. Behavior of prestressing steels after a simulated fire: fire-induced damages
18. Mechanical properties of heat-treated high strength steel under fire/post-fire conditions10.1016/j.jcsr.2014.02.003 ↗
19. Mechanical properties of ASTM A992 steel after fire
20. Post-fire residual mechanical properties of steel butt weld—experimental study10.1016/j.jcsr.2016.11.004 ↗
21. Experimental investigation into the post-fire mechanical properties of hot-rolled and cold-formed steels10.1016/j.jcsr.2016.03.005 ↗
22. Gunn · 1997
23. An overview of modeling cement based materials at elevated temperatures with mechanics of multi-phase porous media10.1007/s10694-011-0216-y ↗
24. Spalling prevention of high performance concrete at high temperatures
25. L.T. Phan, High-strength concrete at high temperature – an overview. In: Proceedings of the 6th International Symposium on Utilization of High Strength/High Performance Concrete. Leipzig, Germany, 2002.
26. Threshold chloride level and characteristics of reinforcement corrosion initiation in simulated concrete pore solutions10.1016/j.conbuildmat.2011.06.079 ↗
27. The low-temperature aging embrittlement in a 2205 duplex stainless steel10.1016/j.msea.2003.12.051 ↗
28. Effect of 475 °C embrittlement on the mechanical properties of duplex stainless steel10.1016/j.msea.2009.01.039 ↗
29. Assessment of strain measurement techniques to characterise mechanical properties of structural steels
30. An experimental investigation into strain and stress partitioning of duplex stainless steel using digital image correlation, X-ray diffraction and scanning Kelvin probe force microscopy10.1177/0309324716631669 ↗
31. Mechanical property degradation and microstructural evolution of cast austenitic stainless steels under short-term thermal aging10.1016/j.jnucmat.2017.07.059 ↗
32. The use of stainless steel in structures10.1002/pse.190 ↗
33. Microstructural evolution in 2101 lean duplex stainless steel during low- and intermediate-temperature aging10.1017/S1431927616000167 ↗
34. Thermal aging phenomena in cast duplex stainless steels10.1007/s11837-015-1709-9 ↗
35. The 475 °C embrittlement in Fe–20Cr and Fe–20Cr–X (X = Ni, Cu, Mn) alloys studied by mechanical testing and atom probe tomography10.1016/j.msea.2013.03.016 ↗
36. Effects of Ni content on the microstructures, mechanical properties and thermal aging embrittlement behaviors of Fe–20Cr–xNi alloys10.1016/j.msea.2015.05.063 ↗
37. Kinetics of initial phase separation and coarsening of nanoscale phase in Fe-Cr alloys10.1016/j.jnucmat.2017.07.063 ↗
38. Effects of thermal aging temperature and Cr content on phase separation kinetics in Fe-Cr alloys simulated by the phase field method10.1007/s12613-013-0835-z ↗
39. Hardening of aged duplex stainless steels by spinodal decomposition10.1017/S1431927604040516 ↗
40. Kinetics of G-phase precipitation and spinodal decomposition in very long aged ferrite of a Mo-free duplex stainless steel10.1016/j.jnucmat.2015.06.017 ↗
41. Phase separation in lean-grade duplex stainless steel 210110.1007/s11837-015-1581-7 ↗
42. Embrittlement of laboratory and reactor aged CF3, CF8, and CF8M duplex stainless steels10.1179/mst.1990.6.3.249 ↗
43. Direct observation and quantification of nanoscale spinodal decomposition in super duplex stainless steel weld metals10.1166/jnn.2009.NS47 ↗
44. Assessment of thermal embrittlement in duplex stainless steels 2003 and 2205 for nuclear power applications10.1016/j.actamat.2014.12.012 ↗
45. Influence of heat treatments at 475 and 400 °C on the pitting corrosion resistance and sensitization of UNS S32750 and UNS S32760 superduplex stainless steels10.1002/maco.201006016 ↗
46. Chloride-induced corrosion resistance of high-strength stainless steels in simulated alkaline and carbonated concrete pore solutions10.1016/j.corsci.2011.12.012 ↗
47. Effect of annealing temperature on the pitting corrosion resistance of super duplex stainless steel UNS S3275010.1016/j.matchar.2009.04.009 ↗
48. Critical pitting and repassivation temperatures for duplex stainless steel in chloride solutions10.1016/j.electacta.2008.02.047 ↗
49. The effect of phase compositions on the pitting corrosion of 25 Cr duplex stainless steel in chloride solutions10.1016/0010-938X(96)00022-4 ↗
50. http://www.amteccorrosion.co.uk/stainlesssteel.html (Amtec Consultant Limited).
51. What does the pitting resistance equivalent really tell us?10.1016/1350-6307(95)00026-7 ↗
52. Influence of nickel additions on the corrosion behaviour of low nitrogen 22% Cr series duplex stainless steels10.1016/j.corsci.2008.05.023 ↗
53. Effects of Ce, La and Ba addition on the electrochemical behavior of super duplex stainless steels10.1016/j.corsci.2009.12.016 ↗
54. Effects of rare earth addition on the cavitation erosion-corrosion resistance of super duplex stainless steels10.1007/BF03186100 ↗
55. Corrosion resistance of Cr-bearing rebar in simulated concrete pore solutions10.2355/isijinternational.47.1324 ↗
56. Effect of pH on pitting corrosion of stainless steel welds in alkaline salt water10.1016/j.conbuildmat.2014.06.090 ↗
57. The electromechanical behaviour of 2205 duplex stainless steel in alkaline solutions with different pH in the presence of chloride10.1016/j.electacta.2012.01.025 ↗
58. Corrosion and inhibition of stainless steel pitting corrosion in alkaline medium and the effect of Cl− and Br− anions10.1016/j.apsusc.2004.08.003 ↗
59. Passive films on stainless steels—chemistry, structure and growth10.1016/S0013-4686(02)00841-1 ↗
60. Environmental factors affecting the critical potential for pitting in 18–8 stainless steel10.1149/1.2423801 ↗
61. Effect of temperature, chloride ion and pH on the crevice corrosion behaviour of SAF 2205 duplex stainless steel in chloride solutions10.1007/s10853-011-5889-6 ↗
62. Synergy between molybdenum and nitrogen on the pitting corrosion resistance and passive film resistance of austenitic stainless steel as a pH-dependent effect10.1016/j.matchemphys.2016.10.049 ↗
63. Passivation behavior of a ferritic stainless steel in concentrated alkaline solutions10.1016/j.jmrt.2015.02.003 ↗
64. Stainless steel reinforcing bars – reasons for their high pitting corrosion resistance10.1002/maco.201005826 ↗