Characterization of ferrocement slab panels containing lightweight expanded clay aggregate using digital image correlation technique
Source abstract
Abstract
Abstract Ferrocement slab panels (FSPs) are thin-walled elements with appropriate strength, hardness, durability and lightness. The flexural behavior of FSPs has been investigated in this study. Specifically, 12 FSPs containing three expanded rib lath layers (i.e. one, two and three) and four volume contents of lightweight expanded clay aggregate (leca) (40, 20, 10 and 0 vol%) were constructed and exposed to three-point flexural test. Digital image correlation (DIC) technique as a full-field approach was used for measuring displacements and strains of the FSPs and the results were compared with those obtained from the displacement sensors. The cracking behavior of the FSPs was also evaluated using the DIC technique. The microstructure of the mortar of FSPs was finally investigated using scanning electron microscopy (SEM) imaging along with energy dispersive spectroscopy (EDS) analysis. The DIC results show that as the mesh volume fraction increases, the flexural capacity (about 14–70%), ductility index (about 9–24%), energy absorption (about 16–107%) and number of cracks increase but the length and width of cracks decrease. The DIC results also indicate that incorporating 10% leca leads to the highest increase of energy absorption (about 48%), ductility index (about 26%) and crack width (about 106%) of the FSPs. The results of microstructural analysis show that incorporating super-plasticizer admixture can decrease the total porosity of mixtures (by about 29–79%).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Ultimate and service behavior of ferrocement roof slab panels10.1016/j.conbuildmat.2004.04.034 ↗
2. Flexural behaviour of bamboo based ferrocement slab panels with flyash10.1016/j.conbuildmat.2016.12.205 ↗
3. Designing, proposing and comparing the methods predicting the compressive strength of the Ferro cement mortar
4. Study on corrosion durability of ferrocement
5. Flexural response of ferrocement with fibrous cementitious matrices10.1016/j.conbuildmat.2006.06.021 ↗
6. Investigation of ferrocement channels using experimental and finite element analysis
7. Flexural behaviour of reinforced concrete slabs with ferrocement tension zone cover10.1016/S0950-0618(00)00019-2 ↗
8. Structural behaviour of ferrocement–brick composite floor slab panel10.1016/j.conbuildmat.2010.04.034 ↗
9. Behavior of pre-cast U-Shaped Composite Beam integrating cold-formed steel with ferro-cement slab10.1016/j.tws.2016.01.014 ↗
10. Fracture characterization of multi-layer wire mesh rubberized ferrocement composite slabs by means of acoustic emission10.1016/j.jclepro.2017.03.192 ↗
11. Mechanical properties of aerated cement slurry-infiltrated chicken mesh10.1016/j.conbuildmat.2018.01.101 ↗
12. The structural behaviour of HCWA ferrocement–reinforced concrete composite slabs10.1016/j.compositesb.2013.02.042 ↗
13. Load capacity and crack development characteristics of HCWA–DSF high strength mortar ferrocement panels in flexure10.1016/j.conbuildmat.2012.05.034 ↗
14. Expanded perlite aggregate characterization for use as a lightweight construction raw material
15. Characterization of lightweight ferrocement panels containing expanded perlite-based mortar10.1016/j.conbuildmat.2015.02.009 ↗
16. Lightweight ferrocement matrix compressive behavior: experiments versus finite element analysis10.1007/s13369-017-2557-4 ↗
17. Recent progress in digital image correlation10.1007/s11340-010-9418-3 ↗
18. Mesomechanic strain analysis of twill-weave composite lamina under unidirectional in-plane tension10.1016/j.compositesa.2008.01.006 ↗
19. Performance of sub-pixel registration algorithms in digital image correlation10.1088/0957-0233/17/6/045 ↗
20. Assessment of digital image correlation measurement errors: methodology and results10.1007/s11340-008-9204-7 ↗
21. Digital image correlation using Newton-Raphson method of partial differential correction10.1007/BF02321405 ↗
22. Applications of digital-image-correlation techniques to experimental mechanics10.1007/BF02325092 ↗
23. Investigating the thermo-mechanical behaviour of cementitious materials using image processing techniques10.1016/j.cemconres.2009.03.008 ↗
24. Characterization of mechanical performance of concrete beams with external reinforcement by acoustic emission and digital image correlation10.1016/j.conbuildmat.2013.06.005 ↗
25. Analysis of cracks and deformations in a full scale reinforced concrete beam using a digital image correlation technique10.1007/s11340-010-9384-9 ↗
26. Fracture examination in concrete through combined digital image correlation and acoustic emission techniques10.1016/j.conbuildmat.2014.07.044 ↗
27. Flexural cracking behavior of normal strength, high strength and high strength fiber concrete beams, using digital image correlation technique10.1016/j.conbuildmat.2015.12.166 ↗
28. On the analysis of notched concrete beams: from measurement with digital image correlation to identification with boundary element method of a cohesive model10.1016/j.engfracmech.2010.10.008 ↗
29. Application of digital image correlation to reinforced concrete fracture10.1016/j.mspro.2014.06.256 ↗
30. Effect of casting flow defects on the crack propagation in UHPFRC thin slabs by means of stereovision Digital Image Correlation10.1016/j.conbuildmat.2016.10.102 ↗
31. Application of digital image correlation at the microscale in fiber-reinforced composites10.1016/j.compositesa.2011.07.014 ↗
32. Characterization of nonlinear shear properties for composite materials using digital image correlation and finite element analysis10.1016/j.compscitech.2012.09.010 ↗
33. Determination of the properties of composite materials thanks to digital image correlation measurements10.1016/j.piutam.2012.05.012 ↗
34. Mesoscopic strain fields in woven composites: experiments vs. finite element modeling10.1016/j.optlaseng.2008.07.009 ↗
35. Analysis of a multiaxial test on a C/C composite by using digital image correlation and a damage model10.1007/BF02410989 ↗
36. Application of Digital Image Correlation to composite reinforcements testing10.1016/j.compstruct.2016.10.096 ↗
37. Analysis of compressive fracture of three different concretes by means of 3D-digital image correlation and vacuum impregnation10.1016/j.cemconcomp.2010.01.003 ↗
38. Digital image correlation10.1016/S1369-7021(10)70235-2 ↗
39. Yoneyama · 2009
40. B. EN, 10346: 2009 Continuously hot-dip coated steel flat products, Technical delivery conditions (2004).
41. B. EN, 13658-1: 2005 Metal lath and beads, Definitions, requirements and test methods. Internal plastering (2005).
42. C. ASTM Standard, Standard Test Method for Flexural Strength of Concrete (using Simple Beam with Third-point Loading), ASTM International 2016.
43. Determination of displacements using an improved digital correlation method10.1016/0262-8856(83)90064-1 ↗
44. Tensile tests of ferrocement
45. Performance of ferrocement panels in different environments10.1016/S0008-8846(02)01003-7 ↗
46. Strength of ligthweight ferrocement in flexure10.1016/0958-9465(91)90042-G ↗
47. Experimental and analytical investigation of ferrocement–concrete composite beams10.1016/j.cemconcomp.2003.08.003 ↗
48. AAC-concrete light weight precast composite floor slab10.1016/j.conbuildmat.2012.10.011 ↗
49. The relation between particle density and static elastic moduli of lightweight expanded clay aggregates10.1016/j.clay.2014.02.017 ↗
50. Mechanical properties of steel fibre reinforced lightweight concrete with pumice stone or expanded clay aggregates10.1007/BF02480589 ↗
51. A comparison study of the mechanical properties and drying shrinkage of oil palm shell and expanded clay lightweight aggregate concretes10.1016/j.matdes.2014.04.001 ↗
52. A. Kumar, Ferrocement Box Sections-viable option for floors and roof of multi-storeyed buildings, (2005).
53. Use of permanent ferrocement forms for concrete beam construction10.1617/s11527-012-9834-1 ↗
54. Structural behavior for rehabilitation ferrocement plates previously damaged by impact loads
55. Fracture process zone size and true fracture energy of concrete using acoustic emission10.1016/j.conbuildmat.2009.10.014 ↗
56. Design predictions of crack widths in ferrocement
57. State-of-the-art Report on Ferrocement
58. Crack control of reinforced concrete members using ferrocement tension zone layer
59. Effect of ferrocement confinement on behavior of concrete10.1016/j.conbuildmat.2008.08.004 ↗
60. Influence of prewetted lightweight aggregates on the behavior and cracking potential of internally cured concrete at an early age10.1016/j.conbuildmat.2015.08.093 ↗
61. Role of lightweight synthetic particles on the restrained shrinkage cracking behavior of mortar10.1061/(ASCE)MT.1943-5533.0000213 ↗
62. Influence of superplasticizer and curing on porosity and pore structure of cement paste10.1016/S0958-9465(99)00031-1 ↗
63. Study of the influence of superplasticizers on the hydration of cement paste using nuclear magnetic resonance and X-ray diffraction techniques10.1016/S0008-8846(01)00636-6 ↗
64. Polycarboxylate superplasticiser admixtures: effect on hydration, microstructure and rheological behaviour in cement pastes10.1680/adcr.2005.17.2.77 ↗
65. ANN prediction of cement mortar compressive strength, influence of cement strength class10.1016/j.conbuildmat.2017.01.132 ↗
66. Characterisation of crystalline C-S-H phases by X-ray photoelectron spectroscopy10.1016/S0008-8846(02)01089-X ↗