journal article·2018-08

Factors affecting the performance characteristics of cementitious grouts for post-tensioning applications

Suruthi Kamalakannan, Ramya Thirunavukkarasu, Radhakrishna G. Pillai, Manu Santhanam

Publisher page

Abstract

Abstract In grouted post-tensioned (PT) systems, cementitious grouts are supposed to completely fill the interstitial spaces between the strands and act as the ‘last line defence system’ against corrosion. However, use of poor quality grout materials and grouting practices result in voided grout systems, ultimately leading to premature failure of tendons in many bridges around the world. To ensure an intact system, the grout must have excellent fresh properties, in particular the flow properties. Such high-performance grouts are not available in many developing countries, where grouting for post-tensioned structures is still a nascent technology. In this research, a two-stage test program was carried out to evaluate the fresh and hardened properties of seven commercial grouts, which includes three Pre-Packaged Grout mixes (PPG); three Site-Batched Grout mixes (SBG) and one standard Ordinary Portland Cement grout mix (PCG). Further, one PPG mix and SBG mix were chosen and their properties were evaluated for three levels of mixing speed and two ambient temperature conditions. Fresh properties such as wet density, efflux time and its retention, standard bleed, wick-induced bleed and pressure bleed, as well as set/hardened properties such as setting time, compressive strength and volume change were evaluated. Three batches of grout were tested for each grout material, to ensure reliability of results. The influence of binder fineness on the performance of grouts was also evaluated. The study serves as a strong evidence in substantiating that the most commonly used grout materials for PT system in developing countries, fail to meet the standard requirements and even the manufacturer’s own specifications. It is also found that the performance of the grout is influenced by mixing speed, ambient temperature, and fineness. The study emphasises that the evaluation of the grout behaviour under simulated field conditions is essential to ensure void free and durable PT systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Grouting, Rheology, and Soil Mechanics · Innovative concrete reinforcement materials · Microbial Applications in Construction Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Post-tensioned structures – improved standards based on lessons learnt
2. J. Corven, P.E. Alan Moreton, FHWA 2013, Post-Tensioning Tendon Installation and Grouting Manual, Federal Highway Administration (FHWA), US Department of Transportation, URL: http://www.fhwa.dot.gov/bridge/construction/pubs/hif13026.pdf, FHWA-NHI-13-026.
3. Theryo · 2013
4. David Whitmore · 2004 · 1
5. VSL International Ltd., Grouting of Post – Tensioning Tendons, VSL Report Series-5, Switzerland, 2002
6. Bijan O. Aalami, Bonded and Un-bonded Post-Tensioning systems in Building Construction – A design and Performance review, Post Tensioning Institute technical notes, Issue 5, 1994, pp.1–10.10.1201/9781003310297-1 ↗
7. Influence of cement grouts composition on the rheological behaviour
8. Development of an injectable grout for concrete repair and strengthening10.1016/j.cemconcomp.2012.10.006 ↗
9. Trejo · 2009
10. Taguchi approach for optimization of the bleeding on cement-based grouts10.1016/j.tust.2004.08.004 ↗
11. Admixture for controlling bleed in cement grout used in post-tensioning10.15554/pcij.11011974.28.39 ↗
12. Simulated field testing of high performance grouts for post-tensioning10.1061/(ASCE)1084-0702(2002)7:2(127) ↗
13. Estimating post-tensioning grout bleed resistance using a pressure-filter test
14. Combined effect of superplasticizer, silica fume and temperature in the performance of natural hydraulic lime grouts10.1016/j.conbuildmat.2013.10.005 ↗
15. Optimisation of flow behaviour and stability of superplasticized fresh hydraulic lime grouts through design of experiments10.1016/j.conbuildmat.2012.04.084 ↗
16. Influence of superplasticizer, temperature, resting time and injection pressure on hydraulic lime grout injectability. Correlation analysis between fresh grout parameters and grout injectability10.1016/j.jobe.2015.08.007 ↗
17. Rheological properties of cement-based grouts determined by different techniques
18. British Standards EN 445:2007, Grout for Prestressing Tendons – Test methods, Part 3.
19. High-performance cementitious grouts for structural repair10.1016/S0008-8846(02)00710-X ↗
20. Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory, ASTM C940, American Society for Testing and Materials, Philadelphia.
21. BS EN 445, “Grout for Prestressing Tendons—Test Methods,” European Committee for Standardization (CEN), Brussels, Belgium, 2007, p. 15.
22. Flowable grout for post-tensioned, segmental concrete bridges
23. Properties of microfine cement grouts at 4 °C, 10 °C and 20 °C10.1016/j.conbuildmat.2013.05.026 ↗
24. Ministry of Road Transport and Highways (MORTH), 2013, “Specifications for Road and Bridge works”, Fifth revision, Indian Roads Congress.
25. Grouts for pre-stressed structures and ground anchors: a critique of european standards and guidelines
26. Basic rheological and mechanical properties of high-volume fly ash grouts10.1016/S0950-0618(02)00026-0 ↗
27. BS EN 12715, “Execution of special geotechnical work—Grouting,” European Committee for Standardization (CEN), Brussels, Belgium.
28. C. Jolicoeur, et al., Progress in understanding the functional properties of superplasticizers in fresh concrete. ACI Special Publication, 148, 1994.
29. Development of microfine cement grouts by pulverizing ordinary cements10.1016/j.cemconcomp.2012.01.009 ↗
30. C. Vogt, Ultrafine particles in concrete: Influence of ultrafine particles on concrete properties and application to concrete mix design, Doctoral Thesis In Concrete Structures, Royal Institute of Technology, TRITA-BKN. Bulletin 103, Stockholm, Sweden, 2010.
31. Effect of mixing procedure on injectability of cementitious grouts10.1016/S0008-8846(99)00054-X ↗
32. Shear-thickening behavior of high-performance cement grouts – influencing mix-design parameters10.1016/j.cemconres.2010.11.004 ↗
33. Optimization of cement grouts containing silica fume and viscosity modifying admixture10.1061/(ASCE)MT.1943-5533.0000026 ↗
34. Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM C305, American Society for Testing and Materials, Conshohoken, PA.
35. Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout, ASTM C1741, American Society for Testing and Materials, Conshohoken, PA.
36. API RP (13B-1)– American Petroleum Institute Recommended Practice for Field Testing Water-based Drilling Fluids, American Petroleum Institute.
37. Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout, ASTM C1090, American Society for Testing and Materials, Conshohoken, PA.
38. Methods of Physical Tests For Hydraulic Cement – IS: 4031 (Part 5) – Determination Of Initial And Final Setting Times, Bureau of Indian Standards, New Delhi.
39. Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory, ASTM C942, American Society for Testing and Materials, Conshohoken, PA.
40. Specification for grouting of post-tensioned cables in prestressed concrete. Specifications for road and bridge works, Fourth Revision, 2001, Ministry of Road Transport and Highways, New Delhi.
41. Post-Tensioning Institute (PTI) committee on grouting specification for grouting of post-tensioned structures. Guide specification for post-tensioned structures, February 2001, Post-Tensioning Institute, Phoenix, Arizona.
42. Standard specifications for concrete structures (2002), Materials and Construction (Chapter 13), Japan society of civil engineers.
43. Grouting of tendons in prestressed concrete, FIP, Guide to Good Practice, Thomas Telford 1990 Federation Internationale de la Precontrainte London.