journal article·2018-10Open access

Experimental and numerical analysis of strain gradient in tensile concrete prisms reinforced with multiple bars

Viktor Gribniak, Ronaldas Jakubovskis, Arvydas Rimkus, Pui-Lam Ng, David Hui

Abstract

This work is a continuation of the ongoing research on deformation behavior of reinforced concrete elements under tension. The previous studies have revealed that deformation behaviors of elements reinforced with multiple bars and the traditional prismatic members reinforced with a center bar are essentially different. The latter layout, though typical of laboratory specimens, could not represent the norm of structures in real-life. Thus, a new test methodology to investigate the strain distribution in concrete prismatic members reinforced with multiple bars subjected to axial tension is devised. Prismatic concrete specimens with different reinforcement configurations were fabricated and tested using the proposed setup. Deformation behavior of the specimens is modeled with a tailor-designed bond modeling approach for rigorous finite element analysis. It is revealed that the average deformations of the concrete could be different from the prevailing approach of average deformations of the steel, and are dependent on the reinforcement configurations. Therefore, the efficiency of concrete in tension should be carefully taken into account for rational design of structural elements. The study endorses promising abilities of finite element technique as a versatile analysis tool whose full potential is to be revealed with the advent of computer hardware.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. Study of composite behavior of reinforcement and concrete in tension
2. Deformation analysis of RC ties: representative geometry10.1002/suco.201600105 ↗
3. Husain · 1968 · 41
4. Crack width variation within the concrete cover of reinforced concrete members
5. Design for SLS according to fib Model Code 201010.1002/suco.201200060 ↗
6. Cracks formed in concrete around deformed tension bars
7. Effects of arrangement of reinforcement on crack width and spacing of reinforced concrete members
8. Investigación experimental sobre los modelos normativos de fisuración en piezas de hormigón armado sometidas a flexión pura10.3989/ic.09.030 ↗
9. Cracking of RC members revisited: influence of cover, φ/ρeff and stirrup spacing – an experimental and theoretical study10.1002/suco.201200016 ↗
10. Analysis of the accuracy of fiber-optic strain transducers installed by using composite smart patches10.1177/0309324715588257 ↗
11. Carbon rovings as strain sensors for structural health monitoring of engineering materials and structures10.1177/0309324716655058 ↗
12. Long term tension stiffening effects in concrete
13. Experimental study of tension stiffening in GFRP RC tensile members under sustained load10.1016/j.engstruct.2014.08.037 ↗
14. É. Pinet, C. Hamel, B. Glišic, D. Inaudi, N. Miron, Health monitoring with optical fiber sensors: from human body to civil structures, in: Proceedings of the 14th International Symposium Smart Structures and Materials & Nondestructive Evaluation and Health Monitoring, San Diego, USA, 2007, p. 12.10.1117/12.715186 ↗
15. A. Khadour, F. Baby, A. Herrera, F. Taillade, P. Marchand, P. Rivillon, A. Simon, M. Quiertant, F. Toutlemonde, Distributed strain monitoring of reinforcement bars using optical fibers for SHM, in: Proceedings of Seventh International Conference on Concrete under Severe Conditions – Environment and Loading (CONSEC13), China, 2013, p. 1620–1629.
16. Reinforcement-concrete bond behavior: experimentation in drying conditions and meso-scale modeling10.1016/j.engstruct.2015.07.028 ↗
17. Explicit representation of physical processes in concrete fracture10.1088/0022-3727/42/21/214002 ↗
18. Defects visualization using acoustic emission tomography technique
19. Observation of flexural cracks in loaded concrete beams using MRI10.1680/macr.2005.57.4.225 ↗
20. Zur mindestbewehrung für zwang von außenwänden aus stahlleichtbeton
21. Hwang · 1983 · 215
22. Williams · 1986 · 56
23. Purainer · 2005 · 150
24. K. Otsuka, Y. Ozaka, Group effects on anchorage strength of deformed bars embedded in massive concrete block, in: Proceedings of the International Conference – Bond in Concrete from Research to Practice, Riga, Latvia, 1992, 1, pp. 38–47.
25. Effect of arrangement of tensile reinforcement on flexural stiffness and cracking10.1016/j.engstruct.2016.06.026 ↗
26. Stochastic tension-stiffening approach for the solution of serviceability problems in reinforced concrete: constitutive modeling10.1111/mice.12133 ↗
27. Stochastic tension-stiffening approach for the solution of serviceability problems in reinforced concrete: exploration of predictive capacity10.1111/mice.12183 ↗
28. Variation of concrete crack width through the concrete cover to reinforcement10.1680/macr.1989.41.147.63 ↗
29. Prediction of crack pattern distribution in reinforced concrete by coupling a strong discontinuity model of concrete cracking and a bond-slip of reinforcement model10.1108/02644400510603014 ↗
30. Crack behavior near reinforcing bars in concrete structures
31. Experimental investigation of cracking and deformations of concrete ties reinforced with multiple bars10.1016/j.conbuildmat.2017.05.029 ↗
32. Hordijk · 1991 · 210
33. Effects of aggregate size on properties of concrete
34. V. Cervenka. Computer simulation of failure of concrete structures for practice, in: Proceedings of the First fib Congress Concrete Structures in 21 Century, Osaka, Japan, 2002, Keynote lecture in Session 13, pp. 289–304.
35. fib (International Federation for Structural Concrete) · 2013 · 434
36. Crack opening estimate in reinforced concrete walls using a steel-concrete bond model10.1016/j.acme.2016.02.001 ↗
37. Crack model for RC members based on compatibility of stress-transfer and mean-strain approaches10.1061/(ASCE)ST.1943-541X.0001842 ↗