journal article·2018-11

Fresh state, mechanical & durability properties of strain hardening cementitious composite produced with locally available aggregates and high volume of fly ash

Mohamed A.A. Sherir, Khandaker M.A. Hossain, Mohamed Lachemi

Publisher page

Abstract

Abstract This paper presents the effect of locally available mortar sand (MS) instead of Silica Sand (SS) and high volumes of Class-F fly ash with 55% and 70% cement replacement rates on the properties of engineered cementitious composite (ECC). ECC is a mortar based composite with a strain capacity of 300–500 times higher than normal concrete by using only 2% of fiber content. The ability of ECC to achieve strain hardening behaviour with closely spaced multiple microcracks can enhance the ductility and durability of concrete structures as well as increase their service life. In this study, the performance of ECCs made with MS and SS with high volumes of fly ash (HVFA) was judged based on the heat of hydration, slump flow, flexural and compressive strengths, ultrasonic pulse velocity, linear expansion/drying shrinkage, sorptivity and frost resistance characteristics in an attempt to produce cost-effective, sustainable and greener ECC mixtures (especially with mortar sand) for different construction applications. Replacing the silica sand by mortar sand at the same HVFA content in ECC mixtures, decreased slump flow and flow velocity, did not have a significant influence on strength (compressive and flexural) or bending capacity and reduced drying shrinkage and expansion properties by about 5% and up to 30%, respectively. Overall, the more or less similar fresh state, mechanical and durability properties confirmed the viability of producing ECC mixtures with mortar sand instead of silica sand in combination with high volumes of Class-F fly ash.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Innovative concrete reinforcement materials · Concrete and Cement Materials Research · Concrete Properties and Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. Volume Stabilisation of High MgO Cement: effect of curing conditions and fly ash addition10.1016/S0008-8846(98)00140-9 ↗
2. ASTM C1038-b, Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2014, pp. 1–3.
3. ASTM C157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2008, pp. 1–7.
4. ASTM C1585, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2013, pp. 1–6.
5. ASTM C1611, Standard Test Method for Slump Flow of Self-Consolidating Concrete. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2014, pp. 1–6.
6. ASTM C1679, Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2014, pp. 1–15.
7. ASTM C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2016, pp. 1–7.
8. ASTM C490,Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2011, pp. 1–5.
9. ASTM C597, Standard Test Method for Pulse Velocity Through Concrete. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2016, pp. 1–4.
10. ASTM C666, Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing. Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2015, pp. 1–7.
11. ASTM C78-b, Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading). Am. Soc. Test. Mater. West Conshohocken, PA, USA, 2015, pp. 1–4.
12. High-volume fly ash concrete with high strength and low drying shrinkage10.1061/(ASCE)0899-1561(2003)15:2(153) ↗
13. High-volume fly ash system: concrete solution for sustainable development
14. Effect of aggregate on the fracture behavior of high strength concrete10.1016/j.conbuildmat.2004.04.013 ↗
15. D. De Koker, G.P.A.G. Van Zijl, Extrusion of engineered cement-based composite material. Proc. 6th RILEM Symp. Fiber-Reinforced Concr., 2004, pp. 20–22.
16. A review of magnesium oxide in concrete
17. Production of MgO-type expansive agent in dam concrete by use of industrial by-products10.1016/j.buildenv.2007.01.037 ↗
18. Soundness evaluation of concrete with MgO10.1016/j.conbuildmat.2005.06.033 ↗
19. P. Hewlett, Lea’s Chemistry of Cement and Concrete, fourth ed., Science, 2004.
20. Strength and fracture energy characteristics of self-consolidating concrete incorporating polyvinyl alcohol, steel and hybrid fibres10.1016/j.conbuildmat.2013.03.054 ↗
21. A novel material for lightweight concrete production10.1016/j.cemconcomp.2009.05.002 ↗
22. Multiple cracking sequence and saturation in fiber reinforced cementitious composites10.3151/crt1990.9.2_19 ↗
23. The tricalcium silicate hydration in the presence of active silica10.1016/0008-8846(83)90033-9 ↗
24. Water Permeability of Engineered Cementitious Composites10.1016/j.cemconcomp.2009.07.002 ↗
25. Tensile strain-hardening behavior or polyvinyl alcohol engineered cementitious composite (PVA-ECC)
26. On engineered cementitious composites (ECC) a review of the material and its applications10.3151/jact.1.215 ↗
27. Engineered cementitious composites (ECC) – tailored composites through micromechanical modeling
28. Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites10.1007/BF02473191 ↗
29. Interface tailoring for strain-hardening polyvinyl alcohol-engineered cementitious composite (PVA-ECC)
30. Mehta · 2006
31. Mindess · 2003
32. MgO expansive cement and concrete in China: past, present and future10.1016/j.cemconres.2013.12.007 ↗
33. Effects of MgO-based expansive additive on compensating the shrinkage of cement paste under non-wet curing conditions10.1016/j.cemconcomp.2011.11.018 ↗
34. 2008
35. Neville · 2011 · 884
36. Self-healing of microcracks in high-volume fly-ash-incorporated engineered cementitious composites
37. Effect of microcracking on frost durability of high-volume-fly-ash- and slag-incorporated engineered cementitious composites
38. Fracture energy and softening behavior of high-strength concrete10.1016/S0008-8846(01)00667-6 ↗
39. Self-healing of mechanically-loaded self consolidating concretes with high volumes of fly ash10.1016/j.cemconcomp.2008.07.001 ↗
40. Internal curing of engineered cementitious composites for prevention of early age autogenous shrinkage cracking10.1016/j.cemconres.2009.07.006 ↗
41. Influence of aggregate type and size on ductility and mechanical properties of engineered cementitious composites
42. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
43. Transport and mechanical properties of self consolidating concrete with high volume fly ash10.1016/j.cemconcomp.2008.12.003 ↗
44. Use of ternary blends containing silica fume and fly ash to suppress expansion due to alkali-silica reaction in concrete10.1016/S0008-8846(01)00680-9 ↗
45. Effect of fly ash composition on the expansion of concrete due to alkali-silica reaction10.1016/S0008-8846(00)00283-0 ↗
46. The influence of MgO-type expansive agent incorporated in self-healing system of Engineered cementitious Composites10.1016/j.conbuildmat.2017.05.109 ↗
47. Development and recovery of mechanical properties of self-healing cementitious composites with MgO expansive agent10.1016/j.conbuildmat.2017.05.063 ↗
48. Self-healing and expansion characteristics of cementitious composites with high volume fly ash and MgO-type expansive agent10.1016/j.conbuildmat.2016.09.125 ↗
49. Structural performance of polymer fiber reinforced engineered cementitious composites subjected to static and fatigue flexural loading10.3390/polym7071299 ↗
50. Effect of fly ash on autogenous shrinkage10.1016/j.cemconres.2004.07.010 ↗
51. Durability performance of concrete incorporating Class F and Class C fly ashes10.1016/j.conbuildmat.2012.02.075 ↗
52. Engineered cementitious composites with high-volume fly ash
53. A strain-hardening cementitious composites with the tensile capacity up to 8%10.1016/j.conbuildmat.2017.01.060 ↗
54. Effect of coarse aggregate type on mechanical properties of high-performance concrete10.1016/S0008-8846(01)00588-9 ↗
55. Influence of MgO expansive agent on behavior of cement pastes and concrete
56. Use of high volumes of fly ash to improve ECC mechanical properties and material greenness
57. Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers10.1016/j.conbuildmat.2017.10.040 ↗