Development of low drying shrinkage foamed concrete and hygro-mechanical finite element model for prefabricated building fasçade applications
Source abstract
Abstract
Abstract Prefabricated lightweight concrete building fascade can improve the energy efficiency of buildings and reduce the carbon emission of transportation. However, it is essential to maintain the dimensional stability of the full scale element. The drying shrinkage of lightweight foamed concrete was investigated in this study. The hypothesis of using the drying shrinkage of normal weight concrete to approximate that of lightweight foamed concrete of dry density about 1500 kg/m3 counterpart was verified. Three different strategies of reducing drying shrinkage were studied. The drying shrinkage of common ingredients of ordinary Portland cement (OPC) and ground granulated blast-furnace slag (GGBS) was commonly up to 2000–3000 μ e . The use of magnesium expansive agent with different calcination conditions could not reduce the drying shrinkage. The use of calcium sulfoaluminate (CSA) cement with OPC and GGBS could significantly reduce the drying shrinkage within 1000 μ e in standard testing environment. The formulation developed in laboratory was scaled up in a concrete production plant for prefabricated concrete elements. A lightweight full scale panel (the wet density was about 1700 kg/m3) was fabricated. The drying shrinkage of the developed formulation with CSA cement was only 161 μ e in the field test. A hygro-mechanical model was developed to model the diffusion, shrinkage and plastic strain evolution. The incremental stress-strain constitutive relationship of the hygro-mechanical model was derived for incorporating it into general finite element routine. The model parameters were calibrated by the drying shrinkage measurements in this study. The calibrated model demonstrated the cracking potential of three typical reinforced concrete panels of three different formulations studied in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Concrete and Cement Materials Research · Innovative concrete reinforcement materials · Concrete Properties and Behavior
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. Properties and sustainability of alkali-activated slag foamed concrete10.1016/j.jclepro.2013.12.068 ↗
2. Concrete using waste oil palm shells as aggregate10.1016/S0008-8846(98)00233-6 ↗
3. Properties of the autoclaved aerated concrete produced from coal bottom ash10.1016/j.jmatprotec.2008.02.044 ↗
4. Microstructure of high-strength foam concrete10.1016/j.matchar.2008.12.011 ↗
5. Geopolymer foam concrete: an emerging material for sustainable construction10.1016/j.conbuildmat.2014.01.081 ↗
6. Structural lightweight aggregate concrete with reduced density-lightweight aggregate foamed concrete10.1016/0262-5075(80)90029-9 ↗
7. Properties of autoclaved lightweight aggregate concrete10.1016/j.buildenv.2006.11.024 ↗
8. Evaluation of thermal conductivity, mechanical and transport properties of lightweight aggregate foamed geopolymer concrete10.1016/j.enbuild.2013.12.029 ↗
9. Physical and mechanical properties of lightweight aerated geopolymer10.1016/j.conbuildmat.2015.01.043 ↗
10. Cellular concretes-composition and methods of preparation
11. Cellular concretes-physical properties
12. Structure and properties of aerated concrete: a review10.1016/S0958-9465(00)00016-0 ↗
13. Mechanisms of air entrainment in concrete10.1016/j.cemconres.2004.07.026 ↗
14. A life cycle assessment model for evaluating the environmental impacts of building construction in Hong Kong10.1016/j.buildenv.2015.02.020 ↗
15. Evaluation analysis of the CO2 emission and absorption life cycle for precast concrete in Korea
16. Effects of half-precast concrete slab system on construction productivity
17. Internal relative humidity and drying stress gradients in concrete10.1617/s11527-006-9090-3 ↗
18. Quantitative discrimination of the nano-pore-structure of cement paste during drying: New insights from water sorption isotherms10.1016/j.cemconres.2015.05.006 ↗
19. Role of disjoining pressure in cement based materials10.1016/j.cemconres.2005.04.004 ↗
20. Interpretation of full sorption-desorption isotherms as a tool for understanding concrete pore structure
21. Surface tension skrinkage and strength of hardened cement paste
22. Refinements to colloid model of C–S–H in cement: CM-II10.1016/j.cemconres.2007.10.006 ↗
23. Effect of initial curing on early strength and physical properties of a lightweight concrete10.1016/S0008-8846(98)00051-9 ↗
24. Drying shrinkage of fibre-reinforced lightweight aggregate concrete containing fly ash10.1016/S0008-8846(99)00179-9 ↗
25. Shrinkage cracking of lightweight concrete made with cold-bonded fly ash aggregates10.1016/j.cemconres.2003.11.024 ↗
26. The filler effect: the influence of filler content and type on the hydration rate of tricalcium silicate10.1111/jace.14859 ↗
27. Effect of calcium carbonate fineness on calcium sulfoaluminate-belite cement10.3390/ma10080900 ↗
28. High-performance cement matrices based on calcium sulfoaluminate-belite compositions10.1016/S0008-8846(01)00649-4 ↗
29. MgO expansive cement and concrete in China: past, present and future10.1016/j.cemconres.2013.12.007 ↗
30. Combined effects of lithium and borate ions on the hydration of calcium sulfoaluminate cement10.1016/j.cemconres.2017.03.006 ↗
31. Origin of drying shrinkage of hardened cement paste: hydration pressure10.3151/jact.8.187 ↗
32. Five year drying of high performance concretes: effect of temperature and cement-type on shrinkage10.1016/j.cemconres.2017.04.017 ↗
33. A review and comparative study of existing shrinkage prediction models for Portland and non-Portland cementitious materials10.1155/2016/2418219 ↗
34. Effect of micropore structure on cellular concrete shrinkage10.1016/0008-8846(77)90095-3 ↗
35. Bubble size distribution of foam10.1515/aut-2002-020103 ↗
36. The effect of porosity on the strength of foamed concrete10.1016/S0008-8846(01)00665-2 ↗
37. Long term study on autogenous deformation of concrete added with MgO
38. The kinetics and mechanism of MgO dissolution10.1016/S0009-2614(99)00909-4 ↗
39. Thermal stability of MgO nanoparticles10.1016/j.matlet.2007.02.032 ↗
40. Hydration and early-age expansion of calcium sulfoaluminate cement-based binders: experiments and thermodynamic modeling10.1080/21650373.2015.1060184 ↗
41. Effects of presoaked lightweight aggregate on deformation properties of ordinary Portland cement-calcium sulfoaluminate cement blends
42. Hydration of calcium sulphoaluminate cements10.1680/adcr.1996.8.31.127 ↗
43. New applications of calcium sulfoaluminate cement10.1016/j.cemconres.2003.10.019 ↗
44. Hydration of calcium sulfoaluminate cements – Experimental findings and thermodynamic modelling10.1016/j.cemconres.2009.08.014 ↗
45. British-Standard-Institution, Determination of setting times and soundness, BS EN 196-3:2005+A1:2008, Methods of testing cement, 2005, pp. 1–18.
46. British-Standard-Institution, Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory, BS ISO 1920–8:2009, Testing of concrete, 2009, pp. 1–26.
47. Prediction of moisture curling of concrete slab10.1617/s11527-010-9665-x ↗
48. Creep and shrinkage prediction model for analysis and design of concrete structures-model B310.1007/BF02485965 ↗
49. Z. Bazant (Ed.), Mathematical Modelling of Creep and Shrinkage of Concrete, RILEM Committee TC-69, John Wiley & Sons, 1988.
50. Idiart · 2009
51. A failure criterion for concrete
52. Chen · 1982
53. An elasto-plastic damage model for reinforced concrete with minimum number of material parameters10.1016/j.compstruc.2004.03.002 ↗
54. CEB-FIP, Model Code 2010 – Final version, fib Bull 65Federation Int du Beton 1, doi: 10.1007/s13398-014-0173-7.2.
55. Refined explicit integration of elastoplastic models with automatic error control10.1108/02644400110365842 ↗
56. A. Inc, Abaqus User Subroutines Reference Guide, ABAQUS Inc, 2014.
57. Creep and drying shrinkage of concrete containing GGBFS10.1016/j.cemconcomp.2016.02.004 ↗
58. Production of MgO-type expansive agent in dam concrete by use of industrial by-products10.1016/j.buildenv.2007.01.037 ↗
59. Evolution of pore structure in blended systems10.1016/j.cemconres.2015.02.025 ↗
60. Hydration stage identification and phase transformation of calcium sulfoaluminate cement at early age10.1016/j.conbuildmat.2014.11.006 ↗