journal article·2020-06

Mechanical activation effect on the biostability of modified cement compositions

Victor Stroganov, Eugene Sagadeev, Ruslan Ibragimov, Ludmila Potapova

Publisher page

Abstract

Abstract The creation of materials with high strength, durability, and biostability is a relevant development area for modern building materials science. This paper studies a number of modified cement compositions obtained by the mechanical activation of the vortex layer device binder. A superplasticizer and carbon nanotubes of various structure and functionality were used as modifiers. The cement composition was determined in a laboratory kinetic unit designed by the authors. It is found that the biostability coefficient values of the cement composition samples obtained by the mechanical activation of the binder and with the introduction of the superplasticizer are 13% higher than the same control composition value. It is indicated that the additional introduction of single and multilayer carbon nanotubes increases the cement composition biostability by 50%. It is found that the highest biostability values are observed in cement compositions obtained by the mechanical activation of the binder with the combined introduction of the superplasticizer and multilayer (MWCNT) «Graphistrength» carboxyl-functionalized (–COOH) nanotubes. The x-ray phase analysis method found that during the exposure of the cement composition samples under study in a model citric acid medium, the portlandite is carbonized with calcite formed which causes a decrease in the compression and bending strength of the cement composition samples.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural mechanics and materials · Concrete and Cement Materials Research · Bone Tissue Engineering Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Interactions between Halothiobacillus neapolitanus and mortars: comparison of the biodeterioration between Portlandcement and calcium aluminate cement10.1016/j.ibiod.2017.03.010 ↗
2. Metabolic activity of micromycetes affecting urban concrete constructions
3. D. Allsopp, K.J. Seal, C.C. Gaylarde, Introduction to Biodeterioration, Cambridge University Press, 2nd ed., 2004. – 252 p.10.1017/CBO9780511617065 ↗
4. Biodeterioration of construction materials: state of the art and future challenges10.1061/(ASCE)0899-1561(2008)20:5(352) ↗
5. Performance of alkali activated slag with various alkali activators
6. Minar Geopolymer as a bonding agent in braking segment composites [Text]: Proceed. 3rd International Symposium “Non-traditional cement&concrete”(Brno) / rep. L. Benes. – 2008. – P. 86–89.
7. Effect of admixtures on properties of alkali-activated slag concrete10.1016/S0008-8846(00)00349-5 ↗
8. The effect of composition and temperature on the properties of fly ash and kaolinite – based geopolymers10.1016/S1385-8947(02)00025-6 ↗
9. Mechanical activation of construction binder materials by various mills
10. Mechano-chemical activation of high-Ca fly ash by cement free blending and gypsum aided grinding10.1016/j.conbuildmat.2013.02.050 ↗
11. P. Balaz, Mechanochemistry in Nanoscience and Minerals Engineering. – Springer-Verlag, Berlin-Heidelberg. – 413 p., 2008.
12. Role of electrostatic potential energy in carbon nanotube augmented cement paste matrix10.1016/j.conbuildmat.2019.117875 ↗
13. Nanotechnology in concrete – a review10.1016/j.conbuildmat.2010.03.014 ↗
14. Influence of carbon nanofiber clustering in cement pastesexposed to sulfate attack10.1016/j.conbuildmat.2018.01.108 ↗
15. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
16. Highly dispersed carbon nanotube reinforced cement based materials10.1016/j.cemconres.2010.02.015 ↗
17. Mechanical behavior and microstructure of cement composites incorporating surface-treated multi-walled carbon nanotubes10.1016/j.carbon.2004.12.017 ↗
18. Growth of cement hydration products on single-walled carbon nanotubes10.1111/j.1551-2916.2009.03055.x ↗
19. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
20. Effect of carbon nanofiber addition in the mechanical properties and durability of cementitious materials10.3989/mc.2012.01211 ↗
21. J.M. Makar, J.J. Beaudoin, Carbon nanotubes and their applications in the construction industry, in: Proceedings of the First International Symposium on Nanotechnology in Construction, Paisley, Scotland, June 23–25, 2003, pp. 331–341, Ed.10.1039/9781847551528-00331 ↗
22. J.M. Makar, J.C. Margeson, J. Luh, Carbon nanotube/cement composite – early results and potential applications, In: 3rd International Conference on Construction Materials: Performance, Innovation and Structural Applications, Vancouver, BC, 2005, pp. 1–10, Ed.
23. R.K. Abu Al-Rub, A.I. Ashour, B.M. Tyson, On the aspect ratio effect of multiwalled carbon nanotube reinforcements on the mechanical properties of cementitious nanocomposites, Constr. Build. Mater. 35 (2012) 647–655, doi: 10.1016/j.conbuildmat.2012.04.086.10.1016/j.conbuildmat.2012.04.086 ↗
24. The influence of surfactants on the processing of multiwalled carbon nanotubes in reinforced cement matrix composites10.1002/pssa.200824310 ↗
25. Challenges and benefits of utilizing carbon nanofilaments in cementitious materials10.1155/2012/371927 ↗
26. A novel cement-based hybrid material10.1088/1367-2630/11/2/023013 ↗
27. Quantification of the re-agglomeration of carbon nanofiber aqueous dispersion in cement pastes and effect on the early age flexural response10.1016/j.carbon.2016.05.076 ↗
28. Performance of carbon nanofibers/cementitious composites with a high-range water-reducer10.3141/2142-16 ↗
29. Influence of carbon nanofiber clustering on the chemomechanical behavior of cement pastes10.1016/j.cemconcomp.2015.10.008 ↗
30. Mechanical activation of cement with addition of fly ash10.1016/S0167-577X(98)00226-2 ↗
31. Mechanochemical activation of high alumina cements-hydration behaviour10.1016/0008-8846(91)90030-L ↗
32. Hydration of mechanically activated blended cements studied by in situ X-ray diffraction10.1134/S0020168515080099 ↗
33. Dry grinding in planetary ball mills: evaluation of a stressing model10.1016/j.apt.2017.11.001 ↗
34. Improving the early strength of concrete: Effect of mechanochemical activation of the cementitious suspension and using of various superplasticizers10.1016/j.conbuildmat.2019.07.313 ↗
35. Micromechanics-based investigation of fatigue deterioration of engineered cementitious composite (ECC)10.1016/j.cemconres.2017.02.029 ↗
36. Optimization of mixing process for heat-insulating mixtures in a spiral blade mixer
37. Efficient complex activation of Portland cement through processing it in the vortex layer machine10.1002/suco.201800008 ↗
38. https://tuball.com/ru/.
39. https://www.arkema.com/en/.
40. Concrete testing – Absorption of water by immersion. NBN B 15-215, Brussels: IBN. 1989.
41. Activation of technological processes of materials in the device rotary electromagnetic field
42. Patent of the Russian Federation № 170410, publ. 04/24/2017, bull. № 12.
43. Patent of the Russian Federation № 139903, publ. 27/04/2014, bull. № 12.
44. Energy parameters of the binder during activation in the vortex layer apparatus10.4028/www.scientific.net/MSF.945.98 ↗
45. On the effects of different types of additives – plasticizers on the properties of white portland cement
46. The identification of plasticizers for concrete
47. Baseless molecular spectral analysis of cation exchangers
48. Biodeterioration of construction materials
49. Modification of epoxy-amine compositions on the basis of water-soluble resin10.1134/S1995421217030194 ↗
50. Investigation of structure of zinc, cobalt, manganese, iron (II) citrates by IR-spectroscopy
51. The influences of admixtures on the dispersion, workability, and strength of carbon nanotube-OPC paste mixtures10.1016/j.cemconcomp.2011.09.013 ↗
52. Functionalization of multi-walled carbon nanotubes realized by microwave-driven chemistry inducing dispersibility in liquid media10.1246/bcsj.81.387 ↗
53. Effect of carbon nanotubes on the structure and properties of cement composites10.1134/S0020168515080087 ↗
54. Sorption of metal ions on multi-walled carbon nanotubes10.1080/1536383X.2010.488080 ↗
55. Modification of multiwalled carbon nanotubes by carboxy groups and determination of the degree of functionalization10.1007/s11172-008-0046-3 ↗
56. Microwave-accelerated dissolution of MWNT in aniline10.1016/j.matlet.2006.03.142 ↗
57. Infrared-active phonons in carbon nanotubes
58. Study of the vibrational states of nanocrystalline carbon by diffuse reflection spectroscopy10.1134/S0030400X07060148 ↗
59. Infrared diffuse reflection spectroscopy of vibration states in nanocarbons10.1016/j.diamond.2007.08.012 ↗