Bond enhancement for NSM FRP bars in concrete using different anchorage systems
Source abstract
Abstract
Abstract Studies have shown that the near-surface mounted (NSM) FRP technique provides better bond performance than the externally bonded (EB) FRP method in strengthening applications. However, undesirable intermediate crack-induced debonding failures and end debonding failures are still frequently observed in NSM FRP reinforcements. In this study, the additional ribs (ARs) anchorage system and the wire mesh mortar protection layer (WML) anchorage system were proposed in an attempt to eliminate such premature debonding failures in NSM FRP strengthening system. The testing results of 20 direct pull-out specimens were used to verify the feasibility of the two proposed anchorage systems in improving the bond behaviour of NSM FRP bars. The individual use of the ARs anchorage system and WML anchorage system enhanced the bond strength of the NSM FRP bars up to 40.7% and 69.7%, respectively. The combined use of the two developed anchorage systems was found to be the most effective in increasing the bond performance of the NSM FRP bars, providing a maximum bond enhancement of 114.3%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Behaviour and strength of FRP-strengthened RC structures: a state-of-the-art review10.1680/stbu.2003.156.1.51 ↗
2. Fundamental principles that govern retrofitting of reinforced concrete columns by steel and FRP jacketing10.1260/136943306778812769 ↗
3. Experimental study of hybrid strengthening technique using carbon fiber laminates and steel plates for reinforced concrete slabs10.1016/j.conbuildmat.2019.03.100 ↗
4. Bond behaviour between hybrid fiber reinforced polymer sheets and concrete10.1016/j.conbuildmat.2019.03.082 ↗
5. Application of FRP composites for underwater piles repair10.1016/j.compositesb.2006.07.011 ↗
6. Effectiveness of using fibre-reinforced polymer composites for underwater steel pipeline repairs10.1016/j.compstruct.2012.12.019 ↗
7. Fire Resistance of Strengthened RC Members Using NSM CFRP Bars with a Cladding Layer10.1061/(ASCE)CC.1943-5614.0000896 ↗
8. Behavior of Damaged Concrete Columns Repaired with Novel FRP Jacket10.1061/(ASCE)CC.1943-5614.0000942 ↗
9. Geogrid-confined pervious geopolymer concrete piles with FRP-PVC-confined concrete core: concept and behaviour10.1016/j.conbuildmat.2019.03.231 ↗
10. Durability of wet lay-up BFRP single-lap joints subjected to freeze–thaw cycling10.1016/j.conbuildmat.2019.117664 ↗
11. Behavior of circular ice-filled self-luminous FRP tubular stub columns under axial compression10.1016/j.conbuildmat.2019.117287 ↗
12. Behavior of circular fiber-reinforced polymer–steel-confined concrete columns subjected to reversed cyclic loads: experimental studies and finite-element analysis10.1061/(ASCE)ST.1943-541X.0002373 ↗
13. ACI A C I. 440.2 R-02: Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. American Concrete Institute, Farmington Hills, USA, 2002.
14. Concrete beams strengthened with externally bonded FRP plates10.1061/(ASCE)1090-0268(2001)5:1(44) ↗
15. Strengthening of reinforced concrete beams with externally bonded fiber-reinforced-plastic plates: design guidelines for shear and flexure10.1139/l98-008 ↗
16. Contribution of externally bonded FRP shear reinforcement to the shear strength of RC beams10.1016/j.compositesb.2018.11.065 ↗
17. Near-surface mounted FRP reinforcement: an emerging technique for strengthening structures10.1016/j.compositesb.2006.08.003 ↗
18. Near-surface-mounted fiber-reinforced polymer reinforcements for flexural strengthening of concrete structures
19. Bond performance of near-surface-mounted FRP bars10.1061/(ASCE)CC.1943-5614.0000150 ↗
20. Reinforced concrete beams strengthened in flexure with near-surface mounted (NSM) CFRP strips: current status and research needs10.1016/j.compositesb.2017.07.072 ↗
21. Post-tension near-surface mounted strengthening system for reinforced concrete beams with changes in concrete condition10.1016/j.compositesb.2018.12.149 ↗
22. The bond of near-surface mounted reinforcement to low-strength concrete10.1080/01694243.2019.1592944 ↗
23. Finite element analysis of end cover separation in RC beams strengthened in flexure with FRP10.1016/j.engstruct.2014.06.031 ↗
24. Experimental and numerical investigation for the flexural strengthening of RC beams using near-surface mounted steel or GFRP bars10.1016/j.conbuildmat.2012.09.107 ↗
25. Bond strength model for CFRP strips near-surface mounted to concrete10.1061/(ASCE)CC.1943-5614.0000402 ↗
26. Bond-slip model for CFRP strips near-surface mounted to concrete10.1016/j.engstruct.2013.05.032 ↗
27. Analytical solution for interaction forces in beams strengthened with near-surface mounted round bars10.1016/j.conbuildmat.2015.12.129 ↗
28. Theoretical solution to fatigue bond stress distribution of NSM FRP reinforcement in concrete10.1016/j.compositesb.2016.06.025 ↗
29. Debonding failures of RC beams strengthened with near surface mounted CFRP strips10.1061/(ASCE)1090-0268(2006)10:2(92) ↗
30. Strengthening of RC beams using bottom and side NSM reinforcement10.1016/j.compositesb.2018.05.011 ↗
31. Experimental investigation of bond between near-surface-mounted CFRP Strips and concrete under freeze-thawing cycling10.1061/(ASCE)AS.1943-5525.0000937 ↗
32. Designing NSM FRP systems in concrete using partial safety factors10.1016/j.compositesb.2017.11.031 ↗
33. Bond behavior of FRP NSM systems in concrete elements10.1016/j.compositesb.2011.10.017 ↗
34. Effect of different material and construction details on the bond behaviour of NSM FRP bars in concrete10.1016/j.conbuildmat.2012.09.015 ↗
35. Wang Bo, Lv Tao, Li Zhengjia. The effect of additional anchoring measures on FRP NSM strengthened concrete beams. National Construction Engineering Conference On FRP. Ha’erbin, China, 2013:35-37 (in Chinese).
36. An experimental study on reinforced concrete beams strengthened with prestressed near surface mounted CFRP strips10.1016/j.engstruct.2014.08.007 ↗
37. Bond performance of NSM FRP bars in concrete with an innovative additional ribs anchorage system: an experimental study10.1016/j.conbuildmat.2019.02.020 ↗
38. Flexural performance of concrete beams reinforced with aluminum alloy bars10.1016/j.engstruct.2016.07.032 ↗
39. Experimental study on the enhancement of additional ribs to the bond performance of FRP bars in concrete10.1016/j.conbuildmat.2018.06.198 ↗
40. Xiuxiu · 2017