Cement-based composite with humidity adsorption and formaldehyde removal functions as an indoor wall material
Source abstract
Abstract
Abstract Indoor air environment is of great significance for the comfort and health of residents while humidity adjustment and air purification are essential to provide favorable air environment. This paper aims to prepare multifunctional cement-based composite with both humidity adsorption and formaldehyde removal properties for indoor walls. Bamboo charcoal loading silver doped titanium dioxide (Ag/TiO2-BC) was synthesized and used in cement-based paste. Properties of the prepared paste including flowability, bonding strength, humidity adsorption and formaldehyde removal ratio, were investigated. Results show that Ag/TiO2-BC increases superplasticizer demand to keep the mini slump spread at a desirable level due to the higher specific surface area and porous structure of Ag/TiO2-BC. Besides, sample with higher content of Ag/TiO2-BC has lower bonding strength whereas the limit value of 0.5 MPa can be met if cement content is not lower than 30%. Humidity adsorption result indicates that Ag/TiO2-BC significantly improves the humidity content of mixture, which shows an approximately linear trend with Ag/TiO2-BC content. Cement paste with Ag/TiO2-BC has 226.5% higher humidity adsorption capacity compared to that with diatomite, which is the result of combined effects of specific surface area and effective pore volume. Formaldehyde removal result shows that formaldehyde removal ratio increases as Ag/TiO2-BC content rises and equilibrium removal ratio can be reached at 24 h. The removal of formaldehyde by cement with diatomite is due to the adsorption of diatomite while cement with Ag/TiO2-BC has both adsorption and photocatalytic decomposition effects. These findings demonstrate that cement-based composite with favorable humidity adsorption and formaldehyde removal performance as well as traditional properties can be prepared by incorporating Ag/TiO2-BC, showing a high potential to be used as wall materials to enhance indoor air environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Building materials and conservation · Aerogels and thermal insulation · Indoor Air Quality and Microbial Exposure
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Impact of indoor environmental quality on students' wellbeing and performance in educational building through life cycle costing perspective10.1016/j.jclepro.2018.09.002 ↗
2. Analysis of indoor humidity environment in Chinese residential buildings10.1016/j.buildenv.2010.03.011 ↗
3. Humidity control materials prepared from diatomite and volcanic ash10.1016/j.conbuildmat.2012.09.040 ↗
4. The effect of combining a relative-humidity-sensitive ventilation system with the moisture-buffering capacity of materials on indoor climate and energy efficiency of buildings10.1016/j.buildenv.2008.04.017 ↗
5. An investigation of moisture buffering performance of wood paneling at room level and its buffering effect on a test room10.1016/j.buildenv.2011.07.021 ↗
6. Influence of pore structure on humidity control performance of diatomite10.1080/23744731.2017.1317576 ↗
7. Structures and humidity controlling performances of zeolite-cement hardened body
8. Experimental study on moisture migration process of zeolite-based composite humidity control material10.1016/j.applthermaleng.2017.08.138 ↗
9. J. Fort, M. Pavlikova, Z. Pavlik, Moisture buffer capacity of cement-lime plasters with enhanced thermal storage capacity, in: T. Simos, C. Tsitouras (Eds.), Proceedings of the International Conference on Numerical Analysis and Applied Mathematics (ICNAAM 2016), AIP Publishing2017. doi: 10.1063/1.4992334.10.1063/1.4992334 ↗
10. Incorporation of bamboo charcoal for cement-based humidity adsorption material10.1016/j.conbuildmat.2019.04.173 ↗
11. Multi-level diffusion model for manufactured sand mortar considering particle shape and limestone powder effects10.1016/j.conbuildmat.2019.02.139 ↗
12. Performance and ITZ of pervious concrete modified by vinyl acetate and ethylene copolymer dispersible powder10.1016/j.conbuildmat.2019.117532 ↗
13. Differences between their influences of TEA and TEA·HCl on the properties of cement paste10.1016/j.conbuildmat.2019.117797 ↗
14. Application of desiccant wheel to control humidity in air-conditioning systems10.1016/j.applthermaleng.2004.04.008 ↗
15. Synthesis of nano-TiO2/diatomite composite and its photocatalytic degradation of gaseous formaldehyde10.1016/j.apsusc.2017.03.198 ↗
16. An assessment of formaldehyde emissions from laminate flooring manufactured in China10.1016/j.yrtph.2016.06.022 ↗
17. High photocatalytic decomposition of the air pollutant formaldehyde using nano-ZnO on bone char10.1007/s10311-014-0453-7 ↗
18. Pollutant exposures and health symptoms in aircrew and office workers: is there a link?10.1016/j.envint.2015.11.008 ↗
19. Surface modification of bone char for removal of formaldehyde from air10.1016/j.apsusc.2013.09.053 ↗
20. Long-term formaldehyde emissions from medium-density fiberboard in a full-scale experimental room: emission characteristics and the effects of temperature and humidity10.1021/acs.est.5b02217 ↗
21. Formaldehyde in the indoor environment10.1021/cr800399g ↗
22. Activated carbon nanofiber produced from electrospun polyacrylonitrile nanofiber as a highly efficient formaldehyde adsorbent10.1016/j.carbon.2010.07.034 ↗
23. Synthesis and photocatalytic activity of cerium-modified CdS-TiO2 photocatalyst for the formaldehyde degradation at room temperature10.1002/zaac.201800315 ↗
24. TiO2 photocatalysis in cementitious systems: Insights into self-cleaning and depollution chemistry10.1016/j.cemconres.2011.12.001 ↗
25. Characterization and photocatalytic performance in air of cementitious materials containing TiO2. Case study of formaldehyde removal10.1016/j.apcatb.2011.06.012 ↗
26. Degradation of Formaldehyde and Benzene by TiO2 Photocatalytic Cement Based Materials10.1007/s11595-017-1608-8 ↗
27. Functionalization of renewable bamboo charcoal to improve indoor environment quality in a sustainable way10.1016/j.jclepro.2019.119028 ↗
28. Characteristics analysis of self-luminescent cement-based composite materials with self-cleaning effect10.1016/j.jclepro.2019.03.291 ↗
29. Effects of nano-SiO2 on early strength and microstructure of steam-cured high volume fly ash cement system10.1016/j.conbuildmat.2018.10.214 ↗
30. Adsorption behaviour of methylene blue onto Jordanian diatomite: A kinetic study10.1016/j.jhazmat.2008.10.018 ↗
31. Experimental study on humidity control performance of diatomite-based building materials10.1016/j.applthermaleng.2016.11.203 ↗
32. GB 175, Common portland cement, Beijing, China, 2007.
33. Synthesis and characterization of TiO2@C core−shell composite nanoparticles and evaluation of their photocatalytic activities10.1021/cm052790n ↗
34. Photocatalytic carbon-nanotube–TiO2 composites10.1002/adma.200802738 ↗
35. GB/T 8077, Methods for testing uniformity of concrete admixture, Beijing, China, 2012
36. GB/T 9779, Multi-layer coatings for architecture, Beijing, China, 2015.
37. Fresh and hardened properties of self-compacting concrete using silicon carbide waste as a viscosity-modifying agent10.1016/j.conbuildmat.2018.12.163 ↗
38. Silicon carbide waste as a source of mixture materials for cement mortar10.1007/s11783-017-0974-y ↗
39. Effect of constituents on rheological properties of fresh concrete-a review10.1016/j.cemconcomp.2017.07.016 ↗
40. Self-consolidating concrete incorporating new viscosity modifying admixtures10.1016/j.cemconres.2003.10.024 ↗
41. Effects of natural zeolite on the fresh and hardened properties of self-compacted concrete10.1016/j.conbuildmat.2013.05.097 ↗
42. JC/T 2177, Diatomaceous decorative interior wall materials, Beijing, China, 2013.
43. Z. Ahmadi, J. Esmaeili, J. Kasaei, R. Hajialioghli, Properties of sustainable cement mortars containing high volume of raw diatomite, Sust. Mater. Technol. 16 (2018) 47-53. doi: 10.1016/j.susmat.2018.05.001.10.1016/j.susmat.2018.05.001 ↗
44. Experimental studies on the applicability of the Kelvin equation to highly curved concave menisci10.1016/0021-9797(81)90212-5 ↗
45. Applicability of the Kelvin equation to vapor liquid-systems in porous-media10.1021/la00085a060 ↗
46. Z. Hu, M. Wyrzykowski, K. Scrivener, P. Lura, A novel method to predict internal relative humidity in cementitious materials by 1H NMR, Cem. Concr. Res. 104 (2018) 80-93. doi: 10.1016/j.cemconres.2017.11.001.10.1016/j.cemconres.2017.11.001 ↗
47. R. Darvishi Cheshmeh Soltani, A. Khataee, M. Mashayekhi, M. Safari, Photocatalysis of formaldehyde in the aqueous phase over ZnO/diatomite nanocomposite, Turk. J. Chem. 40(3) (2016) 402-411. doi: 10.3906/kim-1507-54.10.3906/kim-1507-54 ↗
48. Preparation of Ag nanoparticles loaded TiO2 nanoplate arrays on activated carbon fibers with enhanced photocatalytic activity10.1016/j.catcom.2014.04.015 ↗
49. Preparation and photocatalytic activity of Ag/bamboo-type TiO2 nanotube composite electrodes for methylene blue degradation10.1016/j.mssp.2013.10.023 ↗
50. Enhanced photocatalytic activity of hierarchical macro/mesoporous TiO2–graphene composites for photodegradation of acetone in air10.1016/j.apcatb.2012.02.035 ↗
51. Formaldehyde gas sensing property and mechanism of TiO2-Ag nanocomposite10.1016/j.physb.2010.07.017 ↗
52. Effect of reduction treatment on structural properties of TiO2 supported Pt nanoparticles and their catalytic activity for formaldehyde oxidation10.1039/c1jm10413f ↗