Mitigating inclusion-induced shrinkage cracking in cementitious composites by incorporating recycled concrete fines
Source abstract
Abstract
Abstract Recent studies on utilization of recycled concrete have demonstrated that usually discarded finest fractions can be incorporated into cementitious composites without scarifying their structural performance. It has been shown that these fines can increase the resistance of a cementitious matrix to tensile stresses and reduce shrinkage, and that these effects can be boosted by addition of mineral admixtures. Such findings led us to a consideration that incorporating recycled concrete fines into a concrete mix could possibly mitigate aggregate-induced shrinkage cracking. Here, this hypothesis was put under scrutiny in a comprehensive experimental-numerical study, confirming that blending Portland cement with recycled concrete fines can mitigate inclusion-induced shrinkage cracking, especially when combined with fly ash. The results of coupled hygro-mechanical modeling indicate that incorporating recycled concrete fines leads not only to a decrease of shrinkage but also increases fracture energy and thus has a major impact on the reduction of micro-cracks between inclusions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Recycled Aggregate Concrete Performance · Innovative concrete reinforcement materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (81)
Show source-provided references
1. Parliament and of the council on waste, directive regarding demolition waste
2. Reuse of recycled crushed concrete fines as mineral addition in cementitious materials10.1617/s11527-015-0716-1 ↗
3. Influence of recycled concrete aggregates on strength properties of concrete10.1016/j.conbuildmat.2008.06.007 ↗
4. Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production10.1016/j.conbuildmat.2014.04.117 ↗
5. Durability of self-compacting concrete made with recycled concrete aggregates and mineral admixtures10.1016/j.conbuildmat.2016.10.026 ↗
6. Life cycle assessment (LCA) of different kinds of concrete containing waste for sustainable construction10.3390/buildings8050070 ↗
7. Heterogeneity of recycled concrete aggregates, an intrinsic variability10.1016/j.conbuildmat.2018.04.163 ↗
8. Rehydration reactivity of recycled mortar from concrete waste experienced to thermal treatment10.1016/j.conbuildmat.2007.05.012 ↗
9. Effect of ground waste concrete powder on cement properties
10. Concrete with fine recycled aggregates: a review10.1080/19648189.2013.851038 ↗
11. Durability of crushed fine recycled aggregate concrete assessed by permeability-related properties
12. Properties of concrete incorporating fine recycled aggregate10.1016/j.cemconres.2004.06.017 ↗
13. S. Levy, P. Helène, Durability of concrete mixed with fine recycled aggregates, Exacta 5.https://doi.org/10.5585/exacta.v5i1.1027.10.5585/exacta.v5i1.1027 ↗
14. Durability performance of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2009.09.005 ↗
15. The effect of superplasticizers on the mechanical performance of concrete made with fine recycled concrete aggregates10.1016/j.cemconcomp.2012.06.009 ↗
16. Utilization of fine recycled aggregates in concrete with fly ash and steel slag10.1016/j.conbuildmat.2013.09.037 ↗
17. Rheological behaviour of concrete made with fine recycled concrete aggregates – influence of the superplasticizer10.1016/j.conbuildmat.2015.03.119 ↗
18. Recovery of residual anhydrous clinker in finely ground recycled concrete10.1016/j.resconrec.2019.104640 ↗
19. Role of lime, fly ash, and slag in cement pastes containing recycled concrete fines10.1016/j.conbuildmat.2018.12.227 ↗
20. Mechanical predictions of concrete deterioration — part 2: classification of crack patterns
21. Two-dimensional analysis of crack formation around aggregates in high-shrinkage cement paste10.1016/S0013-7944(99)00113-7 ↗
22. Effect of aggregates on drying shrinkage microcracking in cement-based composites10.1007/BF02483132 ↗
23. A numerical and experimental study of aggregate-induced shrinkage cracking in cementitious composites10.1016/j.cemconres.2011.09.013 ↗
24. Influence of aggregate restraint on the shrinkage of concrete
25. Neville · 1996
26. Effect of aggregate on drying shrinkage of concrete10.3151/jact.6.31 ↗
27. Micromechanics-based simulations of compressive and tensile testing on lime-based mortars10.1016/j.mechmat.2016.11.011 ↗
28. Effect of shrinkage and moisture content on the physical characteristics of blended cement mortars10.1016/S0008-8846(98)00120-3 ↗
29. Triaxial mechanical behaviour of mortar: Effects of drying10.1016/j.cemconres.2003.12.004 ↗
30. Effects of desiccation on mechanical behaviour of concrete10.1016/j.cemconcomp.2004.05.004 ↗
31. Fracture-micromechanics based model of mortars susceptible to shrinkage
32. Effect of cracking on water and chloride permeability of concrete10.1061/(ASCE)0899-1561(1999)11:3(181) ↗
33. Influence of the interfacial transition zone and microcracking on the diffusivity, permeability and sorptivity of cement-based materials after drying10.1680/macr.2008.61.8.571 ↗
34. Chemo-mechanical analysis of concrete cracking and degradation due to external sulfate attack: a meso-scale model10.1016/j.cemconcomp.2010.12.001 ↗
35. EN 197-1:2011: Cement. Composition, specifications and conformity criteria for very low heat special cements, BSI British Standards, 2011.https://doi.org/10.3403/03054726.10.3403/03054726 ↗
36. EN 1992-1-1:2004: Design of concrete structures, Part 1-1: General rules and rules for buildings, BSI British Standards, 2004.https://doi.org/10.12691/ajcea-4-1-6.
37. Pozzolanic and cementitious reactions of fly ash in blended cement pastes10.1016/0008-8846(88)90014-2 ↗
38. BS EN 12350-5:2009: Testing fresh concrete. Flow table test, BSI British Standards, 2009.https://doi.org/10.3403/30164891.10.3403/30164891 ↗
39. Effect of absorption of limestone aggregates on strength and slump loss of concrete10.1016/j.cemconcomp.2009.04.010 ↗
40. Shape analysis of fine aggregates used for concrete10.5566/ias.1400 ↗
41. Workability and mechanical properties of alkali activated slag concrete10.1016/S0008-8846(98)00236-1 ↗
42. Assessment of CO2 reduction of alkali-activated concrete10.1016/j.jclepro.2012.08.001 ↗
43. Mass transfer of water vapour through concrete10.1016/0008-8846(85)90010-9 ↗
44. Effect of cracking in drying and shrinkage specimens10.1016/0008-8846(82)90008-4 ↗
45. Contraction gradient induced microcracking in hardened cement paste10.1016/j.cemconcomp.2011.02.004 ↗
46. BS EN 480-11:2005: Admixtures for concrete, mortar and grout—Test methods—Part 11: Determination of air void characteristics in hardened concrete, BSI British Standards, 2013.https://doi.org/10.3403/30129094.10.3403/30129094 ↗
47. Strength and pore structure of ternary blended cement mortars containing blast furnace slag and silica fume10.1016/S0008-8846(98)00078-7 ↗
48. Rate of pozzolanic reaction of metakaolin in high-performance cement pastes10.1016/S0008-8846(01)00581-6 ↗
49. Effect of fly ash fineness on compressive strength and pore size of blended cement paste10.1016/j.cemconcomp.2004.07.003 ↗
50. Deformation measurements by digital image correlation: Implementation of a second-order displacement gradient10.1007/BF02326485 ↗
51. Equivalence of digital image correlation criteria for pattern matching10.1364/AO.49.005501 ↗
52. ASTM International, Test Method for Dynamic Youngs Modulus, Shear Modulus, and Poissons Ratio by Impulse Excitation of Vibration, 2006.https://doi.org/10.1520/e1876-01r06.10.1520/E1876-01R06 ↗
53. Comprehensive study on microstructure and mechanical properties of lime-pozzolan pastes10.1016/j.cemconres.2014.06.006 ↗
54. Ncorr: open-source 2d digital image correlation matlab software10.1007/s11340-015-0009-1 ↗
55. An integrated experimental-numerical study of the performance of lime-based mortars in masonry piers under eccentric loading10.1016/j.conbuildmat.2016.04.013 ↗
56. Efficient subpixel image registration algorithms10.1364/OL.33.000156 ↗
57. Real-time optical measurement of displacements using subpixel image registration10.1007/s40799-019-00315-1 ↗
58. B. Patzák, OOFEM home page, 2000.http://www.oofem.org.
59. OOFEM – an object-oriented simulation tool for advanced modeling of materials and structures10.14311/1678 ↗
60. Multiscale modeling of drying shrinkage and creep of concrete10.1016/j.cemconres.2016.04.001 ↗
61. D. Rypl, T3D Mesh Generator, 2019.http://mech.fsv.cvut.cz/dr/t3d.html.
62. D. Rypl, Z. Bittnar, Generation of quad-dominant meshes using a triangular mesh generator, in: cturep: Contributions to Mechanics and Structures, vol. 4, CTU Publishing House, Prague, Czech Republic, 2000, pp. 23–38, iSBN 80-01-02320-6.
63. Crack band theory for fracture of concrete
64. Microprestress-solidification theory of concrete creep: Reformulation and improvement10.1016/j.cemconres.2014.03.008 ↗
65. Microprestress-solidification theory: modeling of size effect on drying creep
66. Creep and shrinkage prediction model for analysis and design of concrete structures—model b3, Materials and Structures 28 (1995) 357–365.https://doi.org/10.1007/bf02473152.10.1007/BF02473152 ↗
67. Use of recycled concrete aggregate in fly-ash concrete10.1016/j.conbuildmat.2011.07.023 ↗
68. Mechanical characteristics and water absorption properties of blast-furnace slag concretes with fly ashes or microsilica additions10.3390/app9071279 ↗
69. Dynamic properties of hardened paste, mortar and concrete10.1007/BF02473927 ↗
70. Influence of selected factors on the relationship between the dynamic elastic modulus and compressive strength of concrete10.3390/ma11040477 ↗
71. Long-term creep properties of cementitious materials: comparing microindentation testing with macroscopic uniaxial compressive testing10.1016/j.cemconres.2014.01.004 ↗
72. Mullen · 1963
73. Long-term behavior of concrete slabs prestressed with CFRP rebars subjected to four-point bending10.1016/j.conbuildmat.2018.08.084 ↗
74. An implicit enumeration method for global optimization problems10.1016/0898-1221(91)90173-2 ↗
75. Influence of aggregate size and volume fraction on shrinkage induced micro-cracking of concrete and mortar10.1016/j.cemconres.2009.09.012 ↗
76. Effect of aggregates on drying shrinkage microcracking in cement-based composites10.1007/BF02483132 ↗
77. Numerical strategies for prediction of drying cracks in heterogeneous materials: comparison upon experimental results10.1016/j.engstruct.2010.12.013 ↗
78. The effect of blast furnace slag/fly ash ratio on setting, strength, and shrinkage of alkali-activated pastes and concretes10.3389/fmats.2019.00009 ↗
79. Creep and drying shrinkage of a blended slag and low calcium fly ash geopolymer concrete10.1617/s11527-015-0599-1 ↗
80. Influence of relative humidity on tensile and compressive creep of concrete amended with ground granulated blast-furnace slag10.4314/njt.v37i1.3 ↗
81. On the link between fracture toughness, tensile strength, and fracture process zone in anisotropic rocks10.1016/j.engfracmech.2018.08.017 ↗