journal article·2020-07

Utilising super absorbent polymers as alternative method to test plastic shrinkage cracks in concrete

D.M. Meyer, W.P. Boshoff, R. Combrinck

Publisher page

Abstract

Abstract Plastic shrinkage cracking in concrete is due to evaporation, which is aggravated by harsh environmental conditions. By controlling the conditions in a laboratory to cause high evaporation rates, plastic shrinkage cracks can be induced and then tested. However, in order to control these conditions (wind, temperature, humidity) a large and expensive climate controlled chamber is required. Super absorbent polymers (SAP) are designed to absorb water and could possibly be used to mimic evaporation and thus induce plastic shrinkage cracks. In this study, by testing varying amounts and types of SAP, as well as different concrete mixes, the validity of using SAP as a novel method for testing plastic shrinkage cracking is investigated. The test results indicated that by using the method proposed and placing SAP on the surface of the concrete, plastic settlement and shrinkage occurs in the concrete. The results showed that higher amounts of SAP placed on the surface of the concrete resulted in more plastic shrinkage and ultimately larger plastic shrinkage cracks. Larger plastic shrinkage cracks also formed when SAP with a higher and faster absorption was used. Based on the results of the tested proposition, the proposed method of placing SAP on the surface of the concrete can be utilised to induce plastic shrinkage cracks in concrete. If the same SAP is used internationally for this purpose, all tests could be compared using the same test procedure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete Properties and Behavior · Concrete and Cement Materials Research · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. Influence of concrete depth and surface finishing on the cracking of plastic concrete
2. Plastic Shrinkage Cracking and Evaporation Formulas
3. Combined effect of nano-silica, superabsorbent polymers, and synthetic fibres on plastic shrinkage cracking in concrete10.1016/j.conbuildmat.2018.10.102 ↗
4. ACI 231R. 2010. Report on Early-Age Cracking: Causes, Measurement, and Mitigation. Farmington Hills: American Concrete Institute.
5. Interaction between settlement and shrinkage cracking in plastic concrete10.1016/j.conbuildmat.2018.07.028 ↗
6. Modelling the severity of plastic shrinkage cracking in concrete10.1016/j.cemconres.2013.02.003 ↗
7. Experimental study on the basic phenomena of shrinkage and cracking of fresh mortar10.1016/0008-8846(95)00170-0 ↗
8. Capillary pressure in fresh cement-based materials and identification of the air entry value10.1016/j.cemconcomp.2008.03.002 ↗
9. On the action of capillary pressure in fresh concrete10.1016/0008-8846(76)90050-8 ↗
10. Mechanisms of plastic shrinkage cracking in Portland cement and Portland cement-silica fume paste and mortar10.1016/0008-8846(90)90121-D ↗
11. Susceptibility of Portland cement and blended cement concretes to plastic shrinkage cracking10.1016/j.cemconcomp.2017.10.002 ↗
12. Performance of passive methods in plastic shrinkage cracking mitigation10.1016/j.cemconcomp.2018.05.008 ↗
13. Discrete modelling of plastic cement paste subjected to drying10.1016/j.cemconcomp.2011.02.001 ↗
14. Cracking risks associated with early age shrinkage10.1016/S0958-9465(03)00068-4 ↗
15. Influence of shrinkage-reducing admixtures on development of plastic shrinkage cracks
16. BASF Construction Solutions GmbH. 2017. Starvis S 3911 F in 1C Cementitious CTA’s. Technical Data Sheet.
17. BASF Construction Solutions GmbH. 2017. Starvis S 5514 F for improved qualities of dry mortars through alternative water management and functional pore design. Technical Data Sheet.
18. Iffat · 2015
19. The effect of superabsorbent polymer on various scale of pore structure in ultra-high performance concrete10.1016/j.conbuildmat.2018.03.193 ↗
20. Use of superabsorbent polymers (SAP) as concrete additive10.21809/rilemtechlett.2016.18 ↗
21. Internal curing by superabsorbent polymers in ultra-high performance concrete10.1016/j.cemconres.2015.05.005 ↗
22. Mechtcherine, V., Dudziak, L. & Schulze, J. 2006. Internal curing by superabsorbent polymers (SAP) – effects on material properties of self-compacting fibre-reinforced high performance concrete, in: O.M. Jensen, P. Lura, K. Kovler (Eds.), Int. RILEM Conf. Vol. Chang. Hardening Concr. Test. Mitig., RILEM Publications SARL, 2006, pp. 87-96.10.1617/2351580052.010 ↗
23. Water-entrained cement-based materials I. Principles and theoretical background10.1016/S0008-8846(01)00463-X ↗
24. Water-entrained cement-based materials II. Experimental observations10.1016/S0008-8846(02)00737-8 ↗
25. pH-sensitive superabsorbent polymers: a potential candidate material for self-healing concrete10.1007/s10853-014-8657-6 ↗
26. Self-healing cementitious materials by the combination of microfibers and superabsorbent polymers10.1177/1045389X12438623 ↗
27. ASTM C 1579. 2013. Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fibre Reinforced Concrete (Using a Steel Form Insert). West Conshohocken: ASTM International.
28. Chryso Southern Africa (Pty) Ltd. 2012. Chryso Fluid Premia 310. Technical Data Sheet.
29. Recommendation of RILEM TC 260-RSC: testing sorption by superabsorbent polymers (SAP) prior to implementation in cement-based materials10.1617/s11527-018-1242-8 ↗
30. ASTM C 232. 2014. Standard Test Method for Bleeding of Concrete. West Conshohocken: ASTM International.
31. Effect of various liquid admixtures on cracking of plastic concrete10.1016/j.conbuildmat.2018.12.060 ↗
32. Influence of shrinkage-reducing admixtures on the reduction of plastic shrinkage cracking in concrete10.1016/j.cemconres.2008.11.011 ↗
33. SANS 1083. 2018. Aggregates from natural sources – Aggregates for concrete. Edition 2.06. Pretoria: Standards South Africa.