Generalized hyper-viscoelastic modeling and experimental characterization of unfilled and carbon black filled natural rubber for civil structural applications
Source abstract
Abstract
Abstract Unfilled and carbon black filled natural rubber have attracted considerable attention and have been extensively used as a novel construction material in civil infrastructure applications because of their superior physical and mechanical properties. However, their mechanical behavior is highly nonlinear and further complicated by the significant sensitivity to the loading rate. In this paper, a generalized constitutive model was proposed to improve the description of rate-dependent mechanical behavior of unfilled and carbon black filled natural rubber. The proposed model consisted of a hyperelastic spring to characterize the equilibrium response and a Maxwell element to capture the rate dependency as well as link the overstress to the loading rate. Subsequently, the stress–strain response of both unfilled and filled natural rubber subjected to the cyclic shear loading with different strain rates was experimentally characterized, multi-step relaxation and cyclic shear tests were carried out to calibrate material parameters in the model. Afterwards, a nonlinear viscosity coefficient was derived to completely establish the proposed model and its three-dimensional function versus strain and strain rate was also obtained based on the experimental data. Finally, comparing numerical simulations with cyclic shear tests and real-time hybrid simulation tests, it was found that the simulated results were in good agreement with the test results, indicating the proposed model is capable to accurately describe the hyper-viscoelastic behavior of both unfilled and filled natural rubber under cyclic shear loading, which might become an appropriate choice to be used by researchers and engineers for civil structural applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Elasticity and Material Modeling · Rheology and Fluid Dynamics Studies · Polymer Nanocomposites and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Composites with recycled rubber aggregates: Properties and opportunities in construction10.1016/j.conbuildmat.2018.08.069 ↗
2. A rheological method exploiting Cole-Cole plot allows gel quantification in natural rubber10.1016/j.polymertesting.2017.05.043 ↗
3. Numerical and experimental characterization of the mechanical behavior of a new recycled elastomer for vibration isolation in railway applications10.1016/j.conbuildmat.2016.12.115 ↗
4. A large deformation framework for compressible viscoelastic materials: Constitutive equations and finite element implementation10.1016/j.ijplas.2008.06.012 ↗
5. The use of polyurethane for structural and infrastructural engineering applications: a state-of-the-art review10.1016/j.conbuildmat.2018.09.166 ↗
6. Reconnaissance report on damage of bridges in 2008 Wenchuan, China, earthquake10.1080/13632460902859169 ↗
7. Constantinou MC, Whittaker AS, Kalpakidis Y, Fenz DM and Warn GP. Performance of seismic isolation hardware under service and seismic loading. State University of New York at Buffalo, New York, Multidisciplinary Center for Earthquake Engineering Research, Technical Report No. MCEER-07-0012; 2007.
8. Experimental investigation on effects of elastomer components on dynamic and mechanical properties in seismic isolator compounds10.1016/j.conbuildmat.2016.12.184 ↗
9. Determination of the hyper-viscoelastic model parameters of open-cell polymer foams and rubber-like materials with high accuracy10.1016/j.matdes.2018.07.010 ↗
10. Probabilistic and stochastic aspects of rubber hyperelasticity10.1007/s11012-018-0821-7 ↗
11. A visco-hyperelastic constitutive model to characterize both tensile and compressive behavior of rubber10.1002/app.20029 ↗
12. Developing a visco-hyperelastic material model for 3D finite deformation of elastomers10.1016/j.finel.2017.10.009 ↗
13. Mechanical formulations for bilinear and trilinear hysteretic models used in base isolators10.1007/s10518-016-0014-5 ↗
14. Nonlinear dynamic response of RC buildings with different base-isolation systems subjected to horizontal and vertical components of near-fault ground motions10.2174/1874836801206010373 ↗
15. An improved rheology model for the description of the rate-dependent cyclic behavior of high damping rubber bearings10.1016/j.soildyn.2015.06.001 ↗
16. A constitutive model for carbon black filled rubber: experimental investigations and mathematical representation10.1007/BF01181853 ↗
17. A comparative study of the dynamic behavior of Ramberg-Osgood and Bouc-Wen hysteresis models with application to seismic protection devices10.1016/j.engstruct.2014.07.002 ↗
18. Nonlinear viscosity law in finite-element analysis of high damping rubber bearings and expansion joints
19. Mechanical models for shear behavior in high damping rubber bearings10.1016/j.soildyn.2016.08.035 ↗
20. A visco-hyperelastic constitutive model for rubber-like materials: A rate-dependent relaxation time scheme
21. A constitutive equation for filled rubber under cyclic loading10.1016/j.ijnonlinmec.2010.11.006 ↗
22. A finite viscoelastic constitutive model for filled rubber-like materials10.1016/j.ijsolstr.2015.04.002 ↗
23. Experimental characterization, modeling and parametric identification of the hysteretic friction behavior of viscoelastic joints10.1142/S175882511350018X ↗
24. A theory of finite viscoelasticity and numerical aspects10.1016/S0020-7683(97)00217-5 ↗
25. Visco-hyperelastic constitutive law for modeling of foam’s behavior10.1016/j.matdes.2010.11.010 ↗
26. Constitutive modeling of the tensile and compressive deformation behavior of polyurea over a wide range of strain rates10.1016/j.conbuildmat.2017.06.055 ↗
27. Constitutive modeling of isotropic hyperelastic materials in an exponential framework using a self-contained approach10.1016/j.ijsolstr.2014.08.018 ↗
28. Finite deformation viscoelasticity laws10.1016/S0167-6636(99)00045-9 ↗
29. A visco-hyperelastic approach to modelling rate-dependent large deformation of a dielectric acrylic elastomer10.1007/s10999-014-9270-1 ↗
30. A comprehensive characterization of the electro-mechanically coupled properties of VHB 4910 polymer10.1007/s00419-014-0928-9 ↗
31. A generalized rate-dependent constitutive law for elastomeric bearings10.1016/j.conbuildmat.2015.12.179 ↗
32. An anisotropic elastoplastic damage constitutive model for 3D needled C/C-SiC composites10.1016/j.compstruct.2017.04.043 ↗
33. A rate-dependent constitutive model of high damping rubber bearings: modeling and experimental verification10.1002/eqe.2744 ↗
34. Pseudodynamic tests on rubber base isolators with numerical substructuring of the superstructure and strain-rate effect compensation10.1002/eqe.176 ↗
35. Igarashi A, Sanchez-Flores F, Iemura H, Fujii K, and Toyooka A. Real-time hybrid testing of laminated rubber dampers for seismic retrofit of bridges. 3rd International Conference on Advances in Experimental Structural Engineering (3AESE), 2009.
36. Experimental and analytical studies of seismic response of highway bridges isolated by rate-dependent rubber bearings10.1016/j.engstruct.2017.06.020 ↗