journal article·2020-09

Performance evaluation of polyurethane-stabilized railroad ballast under direct shear conditions

Dinesh Gundavaram, Syed Khaja Karimullah Hussaini

Publisher page

Abstract

Abstract The behavior of Elastan-stabilized and unstabilized ballast was explored using the large-scale direct shear apparatus under different normal stresses (σn) and shearing rates (Sr). Fresh granite ballast and Elastan polyurethane having a density of 1100 kg/m3 was used for the study. Further, a triangular aperture geogrid was also used to compare its benefits with that of Elastan treatment of ballast. Elastan-stabilized ballast samples were tested after a curing period of 3 days. Test results established that the shear strength of ballast was profoundly affected by both the applied normal stress and shearing rate. The friction (φ) and dilation (ψ) angles of unstabilized ballast were found to decrease from 65° to 59° and from 21° to 10°, respectively with an increase of σn and Sr. The results further confirmed that the Elastan treatment significantly enhanced the shear strength of ballast. The friction (φ) and dilation (ψ) angles of Elastan-stabilized ballast increases from 65° to 75° and 21° to 22°, respectively. The stabilization efficiency factor (Sef), defined as the fraction of the shear strength of stabilized ballast to that of unstabilized ballast, varies from 1.6 to 1.75 for Elastan-stabilized ballast. The breakage of ballast (Bg) increased from 7.62 to 11.72% with an increase of σn and Sr. Further, the geogrid reinforcement reduced the Bg from 11.72 to 4.24% when compared to unstabilized ballast. On the other hand, visual inspection of the Elastan-stabilized ballast indicated no degradation of ballast particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Geotechnical Engineering and Underground Structures · Railway Engineering and Dynamics · Geotechnical Engineering and Soil Stabilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. The effects of geogrid reinforcement on unbound aggregates10.1016/S0266-1144(03)00044-X ↗
2. Discrete element modelling of geogrid-reinforced aggregates10.1680/geng.2006.159.1.35 ↗
3. The lateral displacement response of geogrid-reinforced ballast under cyclic loading10.1016/j.geotexmem.2013.07.007 ↗
4. Performance assessment of geogrids reinforced railroad ballast during cyclic loading10.1016/j.trgeo.2014.11.002 ↗
5. Effect of shearing rate on the behaviour of geogrid-reinforced railroad ballast under direct shear conditions10.1016/j.geotexmem.2017.12.001 ↗
6. Szycher · 1999
7. Review of the design and maintenance technologies used to decelerate the deterioration of ballasted railway tracks10.1016/j.conbuildmat.2017.09.007 ↗
8. Track stability using ballast bonding method
9. Strengthening of the railway ballast section shoulder with two-component polymeric binders10.1016/j.trgeo.2017.05.004 ↗
10. E. Laurans, P. Pouligny, W. Michel, J. Ferrellec, G. Geoffrey, A. Bertholet, Surface gluing of ballast to reduce ballast creep on HSL, in: 11th World Congr. Railw. Res., 2016.
11. M.S. Dersch, E. Tutumluer, C.T. Peeler, D.K. Bower, Polyurethane coating of railroad ballast aggregate for improved performance, in: Joint Rail Conference, American Society of Mechanical Engineers, Urbana, IL, 2010.10.1115/JRC2010-36215 ↗
12. M.S. Dersch, E. Tutumluer, A. Mareno, C.T. Peeler, D.K. Bower, Characterization of polyurethane coated railroad ballast behavior, in: 90th Annu. Meet. Transp. Res. Board, Washington, D.C., 2011
13. Boler · 2012
14. Keene · 2012
15. Reducing railway track settlement using three-dimensional polyurethane polymer reinforcement of the ballast10.1016/j.conbuildmat.2013.03.002 ↗
16. Characterisation of rigid polyurethane foam-reinforced ballast through cyclic loading box tests10.17159/2309-8775/2017/v59n2a1 ↗
17. An experimental study on the characteristics of polyurethane-mixed coarse aggregates by large-scale triaxial test10.1016/j.conbuildmat.2017.03.107 ↗
18. Geocomposite technology: reducing railway maintenance
19. A.K. Keene, T.B. Edil, D. Fratta, J.M. Tinjum, Modelling the effect of polyurethane stabilization on rail track response, in: Geo-Congress, ASCE, San Diego, CA, 2013.10.1061/9780784412787.141 ↗
20. Influence of stiffening ballasted track bed overlying a masonry arch bridge using a polyurethane polymer material10.1016/j.conbuildmat.2014.06.098 ↗
21. Application of in situ polyurethane geocomposite beams to improve the passive shoulder resistance of railway track10.1177/0954409711423460 ↗
22. A. Alsabhan, J. Tinjum, D. Fratta, T. Edil, Field validation of polyurethane technology in remediating rail substructure and enhancing rail freight capacity, in: Railroad ballast testing and properties, West Conshohocken, PA, 201810.1520/STP160520170142 ↗
23. Polyurethane based stabilization of railroad ballast – a critical review10.1080/23248378.2019.1570477 ↗
24. Polyurethane reinforced ballasted track: review, innovation and challenge10.1016/j.conbuildmat.2019.03.031 ↗
25. On the shear behavior of ballast-geosynthetic interfaces10.1520/GTJ103317 ↗
26. Performance of geogrid-reinforced railroad ballast in direct shear mode10.1680/jgrim.18.00107 ↗
27. Indraratna · 2011
28. IRS-GE-1, Specifications for track ballast, Research Design and Standard Organisation RDSO, Ministry of Railways, Lucknow, India, 2004
29. S. Hicks, D. Bower, M. Leberfinger, Elastomeric revetments – An innovative solution for coastal protection and erosion control, in: Conference for the Polyurethanes Industry, San Antonio, TX, 2008.
30. Evaluation of properties of rockfill materials10.1061/JSFEAQ.0001735 ↗
31. Mechanical properties of rockfill
32. Large-scale triaxial testing of greywacke rockfill10.1680/geot.1993.43.1.37 ↗
33. Behavior of cement-stabilized fiber-reinforced fly ash-soil mixtures10.1061/(ASCE)1090-0241(2001)127:7(574) ↗
34. Shear strength behavior and parameters of microbial gellan gum-treated soils: from sand to clay10.1007/s11440-018-0641-x ↗
35. Macro and micro-mechanical characteristics of crushed rock aggregate subjected to direct shearing10.1016/j.trgeo.2014.07.007 ↗
36. S.K.K. Hussaini B. Indraratna, J.S. Vinod, An experimental investigation on the deformation and degradation behaviour of geogrid-reinforced ballast, in: Proc. of the Second Int. Conf. on Rail. Technology: Research, Development and Maintenance, Civil-Comp Press, Stirlingshire, UK, 2014.
37. Reflections on design decisions of practical significance to embankment dams10.1680/geot.1977.27.3.281 ↗
38. The influence of confining pressure on the shear strength of compacted rockfill10.1680/geot.1980.30.4.353 ↗
39. Shear behavior of railway ballast based on large scale triaxial testing10.1061/(ASCE)1090-0241(1998)124:5(439) ↗
40. The strength and dilatancy of sands10.1680/geot.1986.36.1.65 ↗
41. Experimental and numerical study of railway ballast behavior under cyclic loading10.1061/(ASCE)GM.1943-5622.0000055 ↗
42. Selig · 1994
43. Large scale testing of rockfill material10.1061/JSFEAQ.0000958 ↗