journal article·2020-09

Suitability of different surfactants as air-entraining admixtures for lime mortars

B.A. Silva, A.P. Ferreira Pinto, A. Gomes, A. Candeias

Publisher page

Abstract

Abstract The paper examines the suitability of three different surfactants as air-entraining admixtures (AEAs) for air lime mortars. The substances tested were based on sodium dodecyl sulfate (SDS), sodium alfa olefin sulfonate (AOS) and cocamidopropyl betaine (CAPB). Results showed that CAPB had the highest air-entraining action of the three, due to its amphoteric nature and, thus, the greatest impact on mechanical strength and porosity, making the mortars more susceptible to degradation by freezing and thawing. Conversely, SDS and AOS caused only moderate changes in lime mortars, but improved their resistance to freeze-thaw cycles. The differences in the performance of the tested surfactants suggest that their use should be carefully assessed as they can have a harmful effect on the already weak and porous air lime mortars, reducing their durability instead of improving it.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Building materials and conservation · Conservation Techniques and Studies · Hygrothermal properties of building materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Forced and natural carbonation of lime-based mortars with and without additives: mineralogical and textural changes10.1016/j.cemconres.2004.12.012 ↗
2. EN 934-3 – Admixtures for concrete, mortar and grout. Part 3: Admixtures for masonry mortar. Definitions, requirements, conformity, marking and labelling. European Committee for Standardization (CEN), 2009.
3. 2015
4. Pigeon · 1995
5. 2003
6. Mechanisms of air entrainment in concrete10.1016/j.cemconres.2004.07.026 ↗
7. Neville · 2011
8. Hewlett · 2004
9. Dodson · 1990
10. Admixtures effect on fresh state properties of aerial lime based mortars10.1016/j.conbuildmat.2008.06.008 ↗
11. Mailvaganam · 1999
12. Freezing of air-entrained cement-based materials and specific actions of air-entraining agents10.1016/S0958-9465(02)00099-9 ↗
13. The morphology of entrained air voids in hardened cement paste generated with different anionic surfactants10.1016/j.cemconcomp.2008.02.003 ↗
14. Effect of water-repellent admixtures on the behaviour of aerial lime-based mortars10.1016/j.cemconres.2009.07.026 ↗
15. A.H.P. Maurenbrecher, K. Trischuk, M.Z. Rousseau, Review of factors affecting the durability of repointing mortars for older masonry, in: Proceedings of the 9th Canadian Masonry Symposium, Fredericton, Canada, 2001, pp. 1–12.
16. The feasibility of synthetic surfactant as an air entraining agent for the cement matrix10.1016/j.conbuildmat.2007.05.002 ↗
17. Durability of masonry systems: a laboratory study10.1016/j.conbuildmat.2005.07.008 ↗
18. Botas · 2009
19. Testing freeze/thaw cycles in lime mortars
20. The effects of air entrainment and pozzolans on frost resistance of 50–60 MPa grade concrete10.1016/j.conbuildmat.2006.02.002 ↗
21. Optimization study and damage evaluation in concrete mixtures exposed to slow freeze-thaw cycles10.1061/(ASCE)0899-1561(2007)19:7(609) ↗
22. EN 459-1 – Building lime. Definitions, specifications and conformity criteria. European Committee for Standardization (CEN), 2010.
23. EN 13139 – Aggregates for mortar. European Committee for Standardization (CEN), 2002.
24. Fresh and hardened state behaviour of aerial lime mortars with superplasticizer10.1016/j.conbuildmat.2019.07.275 ↗
25. B. Silva, A.P. Ferreira Pinto, A. Gomes, A. Candeias, Influence of water content and mixing conditions on the properties of lime-based materials, in press.
26. H. Waldhoff, R. Spilker (Eds.), Handbook of Detergents, Part C: Analysis, vol. 123, first ed., CRC Press, 2016.10.1201/9781420030334 ↗
27. Adsorption of sodium dodecyl sulfate (SDS) at ZnSe and α-Fe2O3 surfaces: combining infrared spectroscopy and batch uptake studies10.1016/j.jcis.2010.04.011 ↗
28. Infrared spectroscopy of anionic, cationic, and zwitterionic surfactants10.1155/2012/903272 ↗
29. EN 196-1 – Methods of testing cement. Part 1: Determination of strength. European Committee for Standardization (CEN), 2005.
30. EN 1015-3 – Methods of test for mortar for masonry. Part 3: Determination of consistency of fresh mortar by flow table. European Committee for Standardization (CEN), 1999.
31. EN 1015-6 – Methods of test for mortar for masonry. Part 6: Determination of bulk density of fresh mortar. European Committee for Standardization (CEN), 1999.
32. EN 1015-7 – Methods of test for mortar for masonry. Part 7: Determination of air content of fresh mortar. European Committee for Standardization (CEN), 1998.
33. EN 196-3 – Methods of testing cement. Part 3: Determination of setting times and soundness. European Committee for Standardization (CEN), 2005.
34. EN 1015-11 – Methods of test for mortar for masonry. Part 11: Determination of flexural and compressive strength of hardened mortar. European Committee for Standardization (CEN), 1999.
35. RILEM Test I.1 - Porosity accessible to water. RILEM 25-PEM – Recommandations provisoires. Essais recommandés pour mesurer l’altération des pierres et évaluer l’éfficacité des méthodes de traitement, Mater. Constr. 13(75) (1980).
36. RILEM Test II.6 – Water absorption coefficient (capillarity). RILEM 25-PEM – Recommandations provisoires. Essais recommandés pour mesurer l’altération des pierres et évaluer l’éfficacité des méthodes de traitement, Mater. Constr. 13(75) (1980).
37. RILEM Test II.1 – Saturation coefficient, S. RILEM 25-PEM – Recommandations provisoires. Essais recommandés pour mesurer l’altération des pierres et évaluer l’éfficacité des méthodes de traitement, Mater. Constr. 13(75) (1980).
38. Air lime mortars: What else do we need to know to apply them in conservation and rehabilitation interventions? A review10.1016/j.conbuildmat.2017.09.080 ↗
39. Artificial aging route for assessing the potential efficacy of consolidation treatments applied to porous carbonate stones10.1016/j.matdes.2017.02.001 ↗
40. Temperature effect on the nanostructure of SDS micelles in water10.6028/jres.118.008 ↗
41. Influence of alkyl chain length of alpha olefin sulfonates on surface and interfacial properties10.1080/01932691.2017.1281144 ↗
42. New force field parameters for the sodium dodecyl sulfate and alpha olefin sulfonate anionic surfactants10.1021/acs.jpcb.8b01452 ↗
43. Effect of amino acids on micellization and micellar parameters of anionic surfactant alpha olefin sulfonate C14–C16 in aqueous solutions: surface tension, conductometric, volumetric, and fluorescence studies10.1021/acs.jced.8b00886 ↗
44. C. Jolicoeur, T. Cong To, T. Soan Nguyen, R. Hill, M. Pagé, Mode of Action of Anionic Surfactants for Air Entrainment in Cement Pastes w-w/o Fly Ash, in: World Of Coal Ash (WOCA) Conference, Lexington, Kentucky, USA, 2009.
45. Rosen · 2004
46. Air void morphology in fresh cement pastes10.1016/S0008-8846(01)00751-7 ↗
47. Studying AEA interaction in cement systems using tensiometry10.1016/j.cemconres.2016.11.005 ↗
48. Effect of surfactants on the yield stress of cement paste10.1016/j.cemconres.2017.04.015 ↗
49. Ion-specific effects in foams10.1016/j.cis.2015.08.007 ↗
50. E.G. Lomax (Ed.), Amphoteric Surfactants, vol. 59, second ed., CRC Press, London, United Kingdom, 1996.
51. Effect of entrained air voids on the microstructure and mass transport properties of concrete10.1016/j.cemconres.2011.06.013 ↗
52. Long-term mechanical resistance and durability of air lime mortars with large additions of nanosilica10.1016/j.conbuildmat.2014.02.030 ↗
53. Freezing and thawing resistance of aerial lime mortar with metakaolin and a traditional water-repellent admixture10.1016/j.conbuildmat.2016.04.029 ↗