journal article·2020-10

Heat evolution, strengths, and drying shrinkage of concrete containing high volume ground bagasse ash with different LOIs

Tawich Klathae, Nattaphop Tanawuttiphong, Weerachart Tangchirapat, Prinya Chindaprasirt, Piti Sukontasukkul, Chai Jaturapitakkul

Publisher page

Abstract

Abstract This research examines the feasibilities of extending the high level of ordinary Portland cement (OPC) substitution by ground bagasse ash (GBA) with different loss on ignitions (LOIs). Bagasse ash (BA) from a sugar mill was processed by floating in the water to have different LOIs values of 10 ± 2, 15 ± 2, and 20 ± 2 wt%. Then, BA was ground to have high fineness and substituted OPC at 50, 65, and 80 wt% of binder to cast high volume ground bagasse ash (HVGBA) concrete. Properties of HVGBA concretes namely, heat evolution, compressive strength, splitting tensile strength, elastic modulus, and drying shrinkage were investigated. The results showed that the use of HVGBA could reduce the peak temperature rise by 8–19 °C from control concrete (CT). The use of 50–65% replacement of GBA with 10–15% of LOI for concrete with OPC of 140–200 kg/m3 produced a compressive strength similar to CT concrete (OPC of 400 kg/m3) at 90 days. HVGBA concretes with different LOIs did not significantly affect splitting tensile strength and elastic modulus of concrete. All concretes incorporating HVGBA with different LOIs had higher drying shrinkages than CT concrete which increased with the increasing LOI and rate of cement replacement. The results also indicated that the high LOI (higher than 15%) of GBA affected mechanical properties of concrete at the early age, particularly at high substitution rate (65–80%). In contrast, GBA with higher LOI had a greater effect on lowering heat evolution, while the higher drying shrinkage was achieved than the concrete with low LOI (10–20%) of GBA. The results indicated that the use of HVGBA as a pozzolanic material had many benefits such as decreasing of disposal area, increasing of its value, reducing the cost of concrete production, and a good choice to reduce CO2 due to the reduction of cement consumption.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Concrete and Cement Materials Research · Materials Engineering and Processing · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. Sugarcane production in 2016, Crops/Regions/World list/Production Quantity (pick lists). UN Food and Agriculture Organization, Corporate Statistical Database (FAOSTAT). (2017). Retrieved 20 August 2018.
2. World Food and Agriculture Statistical Pocketbook 2018, http://www.fao.org/3/CA1796 EN/ca1796en.pdf. Food and Agriculture Organization of the United Nations (FAO), Rome, (2018), 254 pp. Retrieved 24 June 2018.
3. Office of Cane and Sugar Board, Report on Total Cane Crushing and Sugar Production 2018/2019, (2018), Ministry of Industry, Thailand.
4. G.C. Cordeiro, R.D. Toledo Filho, E.M. Fairbairn, L. Tavares, C.H. Oliveira, Influence of mechanical grinding on the pozzolanic activity of residual sugarcane bagasse ash, Proceedings of International RILEM Conference on the Use of Recycled Materials in Building and Structures, Barcelona, Spain, (2004), pp. 731–40.
5. Hydration of bagasse ash-blended portland cement10.1016/S0008-8846(00)00324-0 ↗
6. Evaluation of bagasse ash as supplementary cementitious material10.1016/j.cemconcomp.2007.03.001 ↗
7. Performance of self-compacting concrete containing fly ash10.1016/j.conbuildmat.2007.07.011 ↗
8. Ultrafine grinding of sugar cane bagasse ash for application as pozzolanic admixture in concrete10.1016/j.cemconres.2008.11.005 ↗
9. Use of palm oil fuel ash as a supplementary cementitious material for producing high-strength concrete10.1016/j.conbuildmat.2009.01.008 ↗
10. Durability characteristics of Ultra High Strength Concrete with treated sugarcane bagasse ash10.1016/j.conbuildmat.2018.03.140 ↗
11. Microstructure, strength, and durability of eco-friendly concretes containing sugarcane bagasse ash10.1016/j.conbuildmat.2018.06.153 ↗
12. Self-compacting concrete incorporating sugarcane bagasse ash10.1016/j.conbuildmat.2018.03.277 ↗
13. Characterization and use of an untreated Mexican sugarcane bagasse ash as supplementary material for the preparation of ternary concretes10.1016/j.conbuildmat.2017.09.060 ↗
14. ASTM Standard C618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2015.
15. Effects of LOI of ground bagasse ash on the compressive strength and sulfate resistance of mortars10.1016/j.conbuildmat.2009.06.046 ↗
16. Strength and heat evolution of concretes containing bagasse ash from thermal power plants in sugar industry10.1016/j.matdes.2013.01.031 ↗
17. Strength, chloride resistance, and expansion of concretes containing ground bagasse ash10.1016/j.conbuildmat.2015.10.140 ↗
18. Influence of different processing methods on the pozzolanic performance of sugarcane bagasse ash10.1016/j.cemconcomp.2014.11.002 ↗
19. Sugar cane bagasse ash from a high efficiency co-generation boiler: Applications in cement and mortar production10.1016/j.conbuildmat.2016.10.091 ↗
20. American Concrete Institute (ACI) Standard practice for selecting proportions for normal, heavyweight and mass concrete: ACI 211.1 Farmington Hills, MI, USA (1991).
21. ASTM Standard C39, Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2016.
22. ASTM Standard C496, Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens, ASTM International, West Conshohocken, PA, 2017.
23. ASTM Standard C469, Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression, ASTM International, West Conshohocken, PA, 2014.
24. ASTM Standard C157, Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete, ASTM International, West Conshohocken, PA, 2017.
25. Performance evaluation of sugarcane bagasse ash blended cement in concrete10.1016/j.cemconcomp.2015.03.004 ↗
26. Utilization of palm oil fuel ash in high-strength concrete10.1061/(ASCE)0899-1561(2004)16:6(623) ↗
27. Strength and water permeability of concrete containing palm oil fuel ash and rice husk–bark ash10.1016/j.conbuildmat.2006.06.015 ↗
28. Performance of fine RAP concrete containing flyash, silica fume, and bagasse ash10.1061/(ASCE)MT.1943-5533.0002408 ↗
29. Compressive strength and heat evolution of concretes containing palm oil fuel ash10.1061/(ASCE)MT.1943-5533.0000104 ↗
30. Evaluation of sustainable high-volume fly ash concretes10.1016/j.cemconcomp.2010.09.020 ↗
31. Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash10.1016/j.fuel.2012.10.020 ↗
32. The micromechanical signature of high-volume natural pozzolan concrete by combined statistical nanoindentation and SEM-EDS analyses10.1016/j.cemconres.2016.10.004 ↗
33. Mechanical properties, chloride resistance and microstructure of Portland fly ash cement concrete containing high volume bagasse ash10.1016/j.jobe.2020.101415 ↗
34. Pozzolanic activity and filler effect of sugar cane bagasse ash in Portland cement and lime mortars10.1016/j.cemconcomp.2008.01.001 ↗
35. The effect of silica fume and high-volume Class C fly ash on mechanical properties, chloride penetration and freeze–thaw resistance of self-compacting concrete10.1016/j.conbuildmat.2007.01.002 ↗
36. Effect of used-foundry sand on the mechanical properties of concrete10.1016/j.conbuildmat.2008.05.005 ↗
37. Properties of concrete containing high volume palm oil fuel ash: a short-term investigation
38. Evaluation of ratio between splitting tensile strength and compressive strength for concretes up to 120 MPa and its application in strength criterion
39. Committee · 2011
40. Use of Brazilian sugarcane bagasse ash in concrete as sand replacement10.1016/j.wasman.2010.01.026 ↗
41. Effect of ground bagasse ash on mechanical and durability properties of recycled aggregate concrete10.1016/j.matdes.2011.11.065 ↗
42. Aggregate bond and modulus of elasticity of concrete
43. High-performance concrete: influence of coarse aggregates on mechanical properties
44. Properties of high-strength concrete using a fine fly ash10.1016/S0008-8846(98)00125-2 ↗
45. Shrinkage of concrete stored in natural environments10.1016/S0958-9465(01)00044-0 ↗
46. Report on factors affecting shrinkage and creep of hardened concrete