An optimum polyvinyl alcohol fiber length for reinforced high ductility cementitious composites based on theoretical and experimental analyses
Source abstract
Abstract
Abstract High ductility cementitious composites (HDCCs) exhibit a robust tensile ductility accompanied by multiple cracking and a small crack width. The excellent performance of HDCCs can be elaborately designed by optimizing certain microscopic parameters. Due to the easily customized and controlled characteristics of fiber length, the aim of this study was to tailor the optimum PVA fiber length via theoretical and experimental methods. Based on the micromechanical bridging theory, the effects of the fiber length on the fiber bridging stress, the complementary energy and the fracture energy were determined. Experimental analyses including compressive tests, four-point bending tests and uniaxial tensile tests, were conducted, and five different PVA fiber lengths as 6 mm, 9 mm, 12 mm, 18 mm and 24 mm were employed in this study. Besides, the fiber dispersion properties were evaluated by a backscattering technique. The theoretical results showed that the fiber bridging stress and the complementary energy increased with increasing fiber length; however, the increasing tendency slowed as the proportion of ruptured fibers increased. The fracture energy initially increased and then decreased. A theoretical optimum fiber length was determined to be 10 mm. The experimental results showed that the compressive strength was not affected by the fiber length; the composites can achieve an optimum tensile ductility and flexural performance by incorporating PVA fibers with lengths of 9 mm, for which the fiber distribution coefficient was greater than 80%. The experimental results and theoretical analyses were basically consistent. Therefore, this research can be used as an important guide for tailoring appropriate fiber lengths for HDCC designs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Structural Behavior of Reinforced Concrete
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. C. Lu, V. C. Li, C. K. Y, Leung. Flaw characterization and correlation with cracking strength in Engineered Cementitious Composites (ECC), Cem. Concr. Res. 107(2018) 64-74.10.1016/j.cemconres.2018.02.024 ↗
2. Durability of mechanically loaded engineered cementitious composites under highly alkaline environments10.1016/j.cemconcomp.2007.09.004 ↗
3. Reinforced geopolymer composites for enhanced material greenness and durability10.1016/j.scs.2011.07.009 ↗
4. An improved image processing method for assessing multiple cracking development in strain hardening cementitious composites (SHCC)10.1016/j.cemconcomp.2016.10.005 ↗
5. Effect of fiber content variation on the strength of the weakest section in Strain Hardening Cementitious Composites (SHCC)10.1016/j.conbuildmat.2017.03.020 ↗
6. From micromechanics to structural engineering-the design of cementitious composites for civil engineering application
7. Multiple cracking sequence and saturation in fiber reinforced cementitious composites10.3151/crt1990.9.2_19 ↗
8. Practical design criteria for saturated pseudo strain hardening behavior in ECC10.3151/jact.4.59 ↗
9. Tensile performance of sustainable strain-hardening cementitious composites with hybrid PVA and recycled PET fibers10.1016/j.cemconres.2018.02.013 ↗
10. Effect of fiber rupture on tensile properties of short fiber composites
11. Effect of fiber diameter variation on properties of cement based matrix fiber reinforced composites10.1016/1359-8368(95)00031-3 ↗
12. On interface property characterization and performance of fiber reinforced cementitious composites
13. Study on fiber hybridization effect of engineered cementitious composites with low and high modulus polymeric fibers10.1016/j.conbuildmat.2016.02.112 ↗
14. Use of high volumes of fly Ash to improve ECC mechanical properties and material greenness
15. Macroscopic and microstructural properties of engineered cementitious composites incorporating recycled concrete fines10.1016/j.cemconcomp.2016.12.013 ↗
16. Improved fiber distribution and mechanical properties of engineered cementitious composites by adjusting the mixing sequence10.1016/j.cemconcomp.2011.11.019 ↗
17. Effect of hybrid fiber reinforcement on the cracking process in fiber reinforced cementitious composites10.1016/j.cemconcomp.2012.08.004 ↗
18. Durability properties of micro-cracked ECC containing high volumes fly ash10.1016/j.cemconres.2009.07.009 ↗
19. K. T. Felekoğlu, B. Felekoğlu, Effects of fiber–matrix interaction on multiple cracking performance of polymeric fiber reinforced cementitious composites, Compos. Part B-Eng. 52(2013) 62-71.10.1016/j.compositesb.2013.03.043 ↗
20. Interface tailoring for strain-hardening PVA-ECC
21. Matrix tailoring of Engineered Cementitious Composites (ECC) with non-oil-coated, low tensile strength PVA fiber10.1016/j.conbuildmat.2017.11.072 ↗
22. K. T. Felekoğlu, B. Felekoğlu, R. Ranade, B. Y. Lee, V. C. Li, The role of flaw size and fiber distribution on tensile ductility of PVA-ECC, Compos. Part B-Eng. 56(2014) 536-545.10.1016/j.compositesb.2013.08.089 ↗
23. Study on PVA fiber surface modification for strain-hardening cementitious composites (PVA-SHCC)10.1016/j.conbuildmat.2018.11.072 ↗
24. Effect of fiber length and surface characteristics on the mechanical properties of cementitious composites10.1016/j.conbuildmat.2016.09.009 ↗
25. Mechanical characterization of Engineered Cement-based Composites prepared with hybrid fibers and expansive agent10.1016/j.compositesb.2016.05.051 ↗
26. A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites10.1016/0022-5096(91)90043-N ↗
27. A new model for the cracking process and tensile ductility of strain hardening cementitious composites (SHCC)10.1016/j.cemconres.2015.10.009 ↗
28. Performance-based design of all-grade strain hardening cementitious composites with compressive strengths from 40 MPa to 120 MPa10.1016/j.cemconcomp.2019.01.001 ↗
29. Study on evaluation method for PVA fiber distribution in engineered cementitious composite10.3151/jact.1.265 ↗
30. Numerical model on the stress field and multiple cracking behavior of Engineered Cementitious Composites (ECC)10.1016/j.conbuildmat.2016.12.033 ↗
31. Theoretical analysis on optimal fiber-matrix interfacial bonding and corresponding fiber rupture effect for high ductility cementitious composites10.1016/j.conbuildmat.2019.07.022 ↗
32. Effect of slip-hardening interface behavior on fiber rupture and crack bridging in fiber-reinforced cementitious composites
33. Effect of fiber strength and fiber-matrix interface on crack bridging in cement composites
34. Stochastic model of tensile behavior of strain-hardening cementitious composites (SHCCs)10.1016/j.cemconres.2019.105856 ↗
35. Probabilistic-based assessment for tensile strain-hardening potential of fiber-reinforced cementitious composites10.1016/j.cemconcomp.2018.05.003 ↗
36. Derivation of crack bridging stresses in engineered cementitious composites under combined opening and shear displacements10.1016/j.cemconres.2018.02.027 ↗
37. Basic mechanical properties of ultra-high ductility cementitious composites: From 40 MPa to 120 MPa10.1016/j.compstruct.2017.11.034 ↗
38. The connection between microscopic and macroscopic properties of ultra-high strength and ultra-high ductility cementitious composites (UHS-UHDCC)10.1016/j.compositesb.2018.11.062 ↗