Continuum-based micromechanical models for asphalt materials: Current practices & beyond
Source abstract
Abstract
The mechanical properties of asphalt mixture are always required for the evaluation of the durability of pavements. In order to obtain these properties without conducting expensive laboratory tests and using calibrated empirical models, research studies have been carried out to develop micromechanics-based models. Continuum-based micromechanical models (CBMM), which are developed based on continuum mechanics, have increasingly been utilized to estimate the mechanical properties of asphalt materials based on the fundamental properties of individual constituents. These analytical models are expected to provide reliable predictions without the need for extensive computational facilities. Although the utilization of CBMM has been presented by several past studies, most of the studies do not provide a concise and critical review of these models. Therefore, in this paper, a complete review of CBMM was presented. Commonly used CBMM were introduced in detail and their advantages and disadvantages were discussed and compared. Comprehensive summaries and critical discussions about their current utilization and limitations for predicting the mechanical properties of asphalt materials were given. Further modifications and new development for addressing the limitations were extensively described and discussed. In the end, research challenges were highlighted and future recommendations from different perspectives were proposed.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Composite Material Mechanics · Asphalt Pavement Performance Evaluation · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Road design and dynamic loading
2. A new method of predicting the stiffness of asphalt paving mixtures
3. Revised predictive model for dynamic (complex) modulus of asphalt mixtures10.1177/0361198196154000103 ↗
4. J. Bari, M.W. Witczak, Development of a new revised version of the Witczak E Predictive Model for hot mix asphalt mixtures, 2006.
5. Continuum mesomechanical finite element modeling in materials development: a state-of-the-art review10.1115/1.3097288 ↗
6. Microstructural simulation of asphalt materials: modeling and experimental studies10.1061/(ASCE)0899-1561(2004)16:2(107) ↗
7. Discrete element modeling to predict the modulus of asphalt concrete mixtures10.1061/(ASCE)0899-1561(2004)16:2(140) ↗
8. Micromechanical modeling of the influence of material properties on moisture-induced damage in asphalt mixtures10.1016/j.conbuildmat.2009.12.022 ↗
9. Micromechanical model for heterogeneous asphalt concrete mixtures subjected to fracture failure10.1061/(ASCE)MT.1943-5533.0000004 ↗
10. Effects by property homogeneity of aggregate skeleton on creep performance of asphalt concrete10.1016/j.conbuildmat.2018.03.150 ↗
11. Study of cornering maneuvers of a pneumatic tire on asphalt pavement surfaces using the finite element method10.3141/2457-14 ↗
12. Microstructural analysis of porous asphalt concrete mix subjected to rolling truck tire loads10.3141/2575-12 ↗
13. Virtual testing of asphalt mixture with two-dimensional and three-dimensional random aggregate structures10.1080/10298436.2015.1066005 ↗
14. Image-aided random aggregate packing for computational modeling of asphalt concrete microstructure10.1016/j.conbuildmat.2018.05.139 ↗
15. Comparison of different micromechanical models for predicting the effective properties of open graded mixes10.1177/0361198118794713 ↗
16. Issues in the prediction of the mechanical properties of open graded mixes10.1177/0361198118792117 ↗
17. Effect of stone-on-stone contact on porous asphalt mixes: micromechanical analysis
18. Y.Z. Huiming Yin, Introduction to the Micromechanics of Composite Materials, 2018.
19. The determination of the elastic field of an ellipsoidal inclusion, and related problems10.1098/rspa.1957.0133 ↗
20. Solutions for effective shear properties in three phase sphere and cylinder models10.1016/0022-5096(79)90032-2 ↗
21. Ueber die Beziehung zwischen den beiden Elasticitätsconstanten isotroper Körper10.1002/andp.18892741206 ↗
22. Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle10.1002/zamm.19290090104 ↗
23. Modulus of elasticity iof concrete affected by elastic moduli of cement paste matrix and aggregate
24. B. Paul, Prediction of elastic constants of multiphase materials. Technical Report No. 3, Brown Univ., Providence, 1959, p. Medium: X; Size: Pages: 22.
25. A variational approach to the theory of the elastic behaviour of multiphase materials10.1016/0022-5096(63)90060-7 ↗
26. On elastic behaviour of fibre reinforced materials of arbitrary transverse phase geometry10.1016/0022-5096(65)90015-3 ↗
27. On bounds for the overall elastic moduli of inhomogeneous systems—I10.1016/0022-5096(66)90035-4 ↗
28. On bounds for the overall elastic moduli of inhomogeneous systems—II10.1016/0022-5096(66)90025-1 ↗
29. Concerning bounds on the transport and mechanical properties of multicomponent composite materials10.1007/BF00616659 ↗
30. Bounds on the elastic and transport properties of two-component composites10.1016/0022-5096(82)90022-9 ↗
31. Variational bounds on the effective moduli of anisotropic composites10.1016/0022-5096(88)90001-4 ↗
32. Use of classical variational principles to determine bounds for the effective bulk modulus in heterogeneous media10.1090/qam/99925 ↗
33. New third-order bounds on the effective moduli of n-phase composites10.1090/qam/700661 ↗
34. Walpole bounds on the effective elastic moduli of isotropic multicomponent composites10.1063/1.337250 ↗
35. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
36. Hard tissue as a composite material—I. Bounds on the elastic behavior10.1016/0021-9290(71)90064-9 ↗
37. Hirsch model for estimating the modulus of asphalt concrete
38. The effect of inclusion shape on the elastic moduli of a two-phase material10.1016/0020-7683(66)90002-3 ↗
39. On the overall elastic moduli of composite materials10.1016/0022-5096(69)90014-3 ↗
40. The effect of aspect ratio of inclusions on the elastic properties of unidirectionally aligned composites10.1002/pc.750050413 ↗
41. T. Mura, Micromechanics of defects in solids, 1982.10.1007/978-94-011-9306-1 ↗
42. The elasticity of an isotropic aggregate of anisotropic cubic crystals10.1115/1.4010899 ↗
43. Berechnung der elastischen Konstanten des vielkilstalls aus den Konstanten des Einkristalls10.1007/BF01337948 ↗
44. On the effective moduli of isotropic two-phase elastic composites10.1177/002199837400800108 ↗
45. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
46. Long-wavelength propagation in composite elastic media II. Ellipsoidal inclusions10.1121/1.385172 ↗
47. The elastic and thermo-elastic properties of composite media10.1088/0370-1301/69/8/305 ↗
48. A critical evaluation for a class of micro-mechanics models10.1016/0022-5096(90)90005-O ↗
49. Generalized self-consistent scheme for upscaling of viscoelastic properties of highly-filled matrix-inclusion composites – application in the context of multiscale modeling of bituminous mixtures10.1016/j.compositesb.2011.05.034 ↗
50. Dynamic modulus prediction of HMA mixtures based on the viscoelastic micromechanical model10.1061/(ASCE)0899-1561(2008)20:8(530) ↗
51. n-Layered inclusion-based micromechanical modelling10.1016/0020-7225(93)90059-4 ↗
52. Average stress in matrix and average elastic energy of materials with misfitting inclusions10.1016/0001-6160(73)90064-3 ↗
53. Thermal expansions of heterogeneous solids containing aligned ellipsoidal inclusions10.1177/002199837400800407 ↗
54. Analysis of the thermal expansion coefficients of particle-filled polymers10.1177/002199838001400111 ↗
55. Some elastic properties of reinforced solids, with special reference to isotropic ones containing spherical inclusions10.1016/0020-7225(84)90033-8 ↗
56. A new approach to the application of Mori-Tanaka's theory in composite materials10.1016/0167-6636(87)90005-6 ↗
57. On stiffness and strength of an aligned short-fiber reinforced composite containing penny-shaped cracks in the matrix10.1177/002199838101500301 ↗
58. On two kinds of ellipsoidal inhomogeneities in an infinite elastic body: an application to a hybrid composite10.1016/0020-7683(81)90018-4 ↗
59. The viscosity of suspensions of rigid spheres10.1088/0508-3443/3/8/306 ↗
60. A study of the differential scheme for composite materials10.1016/0020-7225(77)90058-1 ↗
61. A differential scheme for the effective moduli of composites10.1016/0167-6636(85)90002-X ↗
62. A generalized differential effective medium theory10.1016/0022-5096(85)90001-8 ↗
63. The elastic moduli of heterogeneous materials10.1115/1.3636446 ↗
64. Viscoelastic behavior of heterogeneous media10.1115/1.3627270 ↗
65. Complex moduli of viscoelastic composites—I. General theory and application to particulate composites10.1016/0020-7683(70)90029-6 ↗
66. Bland · 1960
67. Evaluation of empirical and theoretical models to determine asphalt mixture stiffnesses at low temperatures
68. On using micromechanical models to describe dynamic mechanical behavior of asphalt mastics10.1016/S0167-6636(02)00166-7 ↗
69. Linear viscoelastic analysis of asphalt mastics10.1061/(ASCE)0899-1561(2004)16:2(122) ↗
70. A four phase micro-mechanical model for asphalt mastic modulus10.1016/j.mechmat.2014.04.001 ↗
71. Understanding asphalt mastic behavior through micromechanics10.3141/1681-19 ↗
72. Modelling asphalt mastic stiffness using discrete element analysis and micromechanics-based models10.1080/10298430500159040 ↗
73. Assessment of existing micro-mechanical models for asphalt mastics considering viscoelastic effects10.1080/14680629.2008.9690106 ↗
74. Y.-R. Kim, Mechanistic fatigue characterization and damage modeling of asphalt mixtures, 2003.
75. C. James Zollinger, Application of Surface Energy Measurements to Evaluate Moisture Susceptibility of Asphalt and Aggregates, Texas A&M University, College Station, TX, 2005.
76. Branco · 2008
77. Modelling of cohesion and adhesion damage of seal based on dynamic shear rheometer testing
78. New design method of fine aggregates mixtures and automated method for analysis of dynamic mechanical characterization data10.1016/j.conbuildmat.2012.11.038 ↗
79. Effect of volumetric factors on the mechanical behavior of asphalt fine aggregate matrix and the relationship to asphalt mixture properties10.1016/j.conbuildmat.2013.08.045 ↗
80. Multiscale prediction of viscoelastic properties of asphalt concrete10.1061/(ASCE)0899-1561(2009)21:12(771) ↗
81. Upscaling of viscoelastic properties of highly-filled composites: investigation of matrix–inclusion-type morphologies with power-law viscoelastic material response10.1016/j.compscitech.2009.06.008 ↗
82. Micromechanical modelling of bituminous materials’ complex modulus at different length scales
83. Multiscale modeling to predict mechanical behavior of asphalt mixtures10.3141/2181-04 ↗
84. Predicting dynamic modulus of asphalt mixtures with differential method10.1080/14680629.2009.9690198 ↗
85. Multiscale fatigue model for bituminous mixtures10.1016/j.ijfatigue.2011.05.014 ↗
86. B.S. Underwood, Multiscale constitutive modeling of asphalt concrete, 2011.
87. T. D.G., Review of mineral fillers, J. Assoc. Asphalts Paving Technol. 3 (1962) 118-150.
88. The use of fillers in bituminous road surfacings. A study of filler-binder systems in relation to filler characteristics10.1002/jctb.5000660902 ↗
89. G.W.H. Anderson D. A., Mechanical behavior and reinforcement of mineral fillerasphalt mixtures, Proc. Assoc. Asphalt Paving Technol. 42 (1973) 37–66.10.5703/1288284313845 ↗
90. Unique effects of hydrated lime filler on the performance-related properties of asphalt cements: physical and chemical interactions revisited10.1061/(ASCE)0899-1561(2005)17:2(207) ↗
91. Modelling of asphalt mastic in terms of filler-bitumen interaction10.1080/14680629.2010.9690335 ↗
92. Some physico-chemical aspects of the effect and the role of the filler in bituminous paving mixtures
93. H. Al-Mosawe, N. Thom, G. Airey, A. Al-Bayati, Effect of aggregate gradation on the stiffness of asphalt mixtures, 16(2) (2015) 39.10.1515/ijpeat-2015-0008 ↗
94. Elastic modulus prediction of asphalt concrete10.1061/(ASCE)0899-1561(1999)11:3(236) ↗
95. A review of particulate reinforcement theories for polymer composites10.1007/BF00580110 ↗
96. Analytical modeling of three-layered HMA mixtures10.1061/(ASCE)1532-3641(2007)7:2(140) ↗
97. Micromechanics-based dynamic modulus prediction of polymeric asphalt concrete mixtures10.1016/j.compositesb.2007.05.003 ↗
98. Effective elastic moduli of two-phase composites containing randomly dispersed spherical inhomogeneities10.1007/BF01180222 ↗
99. Elastic modelling of periodic composites with particle interactions10.1080/09500830500157413 ↗
100. Prediction of dynamic modulus of asphalt mixture using micromechanical method with radial distribution functions10.1617/s11527-019-1348-7 ↗